[PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2)
Jani Nikula
jani.nikula at linux.intel.com
Fri Jan 10 11:43:38 UTC 2020
On Sun, 05 Jan 2020, Hans de Goede <hdegoede at redhat.com> wrote:
> From: Derek Basehore <dbasehore at chromium.org>
>
> Not every platform needs quirk detection for panel orientation, so
> split the drm_connector_init_panel_orientation_property into two
> functions. One for platforms without the need for quirks, and the
> other for platforms that need quirks.
>
> Hans de Goede (changes in v2):
>
> Rename the function from drm_connector_init_panel_orientation_property
> to drm_connector_set_panel_orientation[_with_quirk] and pass in the
> panel-orientation to set.
>
> Beside the rename, also make the function set the passed in value
> only once, if the value was set before (to a value other then
> DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
>
> This change is preparation for allowing the user to override the
> panel-orientation for any connector from the kernel commandline.
> When the panel-orientation is overridden this way, then we must ignore
> the panel-orientation detection done by the driver.
Acked-by: Jani Nikula <jani.nikula at intel.com>
for merging via drm-misc.
---
Side note, I'm a bit concerned about the gradual accumulation of ad hoc
ways to set various connector properties on the kernel
command-line... without actually making it a generic way to set any
arbitrary connector properties on the kernel command-line.
BR,
Jani.
>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Derek Basehore <dbasehore at chromium.org>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++-------
> drivers/gpu/drm/i915/display/icl_dsi.c | 5 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 9 ++-
> drivers/gpu/drm/i915/display/vlv_dsi.c | 5 +-
> include/drm/drm_connector.h | 9 ++-
> 5 files changed, 71 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2166000ed057..de5031c4aa49 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1139,7 +1139,8 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
> * coordinates, so if userspace rotates the picture to adjust for
> * the orientation it must also apply the same transformation to the
> * touchscreen input coordinates. This property is initialized by calling
> - * drm_connector_init_panel_orientation_property().
> + * drm_connector_set_panel_orientation() or
> + * drm_connector_set_panel_orientation_with_quirk()
> *
> * scaling mode:
> * This property defines how a non-native mode is upscaled to the native
> @@ -2046,38 +2047,41 @@ void drm_connector_set_vrr_capable_property(
> EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
>
> /**
> - * drm_connector_init_panel_orientation_property -
> - * initialize the connecters panel_orientation property
> - * @connector: connector for which to init the panel-orientation property.
> - * @width: width in pixels of the panel, used for panel quirk detection
> - * @height: height in pixels of the panel, used for panel quirk detection
> + * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
> + * @connector: connector for which to set the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + *
> + * This function sets the connector's panel_orientation and attaches
> + * a "panel orientation" property to the connector.
> *
> - * This function should only be called for built-in panels, after setting
> - * connector->display_info.panel_orientation first (if known).
> + * Calling this function on a connector where the panel_orientation has
> + * already been set is a no-op (e.g. the orientation has been overridden with
> + * a kernel commandline option).
> *
> - * This function will check for platform specific (e.g. DMI based) quirks
> - * overriding display_info.panel_orientation first, then if panel_orientation
> - * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> - * "panel orientation" property to the connector.
> + * It is allowed to call this function with a panel_orientation of
> + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
> *
> * Returns:
> * Zero on success, negative errno on failure.
> */
> -int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height)
> +int drm_connector_set_panel_orientation(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation)
> {
> struct drm_device *dev = connector->dev;
> struct drm_display_info *info = &connector->display_info;
> struct drm_property *prop;
> - int orientation_quirk;
>
> - orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> - if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> - info->panel_orientation = orientation_quirk;
> + /* Already set? */
> + if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + return 0;
>
> - if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + /* Don't attach the property if the orientation is unknown */
> + if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> return 0;
>
> + info->panel_orientation = panel_orientation;
> +
> prop = dev->mode_config.panel_orientation_property;
> if (!prop) {
> prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> @@ -2094,7 +2098,37 @@ int drm_connector_init_panel_orientation_property(
> info->panel_orientation);
> return 0;
> }
> -EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> +
> +/**
> + * drm_connector_set_panel_orientation_with_quirk -
> + * set the connecter's panel_orientation after checking for quirks
> + * @connector: connector for which to init the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * Like drm_connector_set_panel_orientation(), but with a check for platform
> + * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_set_panel_orientation_with_quirk(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation,
> + int width, int height)
> +{
> + int orientation_quirk;
> +
> + orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> + if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + panel_orientation = orientation_quirk;
> +
> + return drm_connector_set_panel_orientation(connector,
> + panel_orientation);
> +}
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>
> int drm_connector_set_obj_prop(struct drm_mode_object *obj,
> struct drm_property *property,
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 325df29b0447..340a77eb62b0 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> - connector->base.display_info.panel_orientation =
> - intel_dsi_get_panel_orientation(connector);
> - drm_connector_init_panel_orientation_property(&connector->base,
> + drm_connector_set_panel_orientation_with_quirk(&connector->base,
> + intel_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> connector->panel.fixed_mode->vdisplay);
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index b05b2191b919..5237a5615915 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7350,9 +7350,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> intel_connector->panel.backlight.power = intel_edp_backlight_power;
> intel_panel_setup_backlight(connector, pipe);
>
> - if (fixed_mode)
> - drm_connector_init_panel_orientation_property(
> - connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
> + if (fixed_mode) {
> + /* We do not know the orientation, but their might be a quirk */
> + drm_connector_set_panel_orientation_with_quirk(connector,
> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
> + fixed_mode->hdisplay, fixed_mode->vdisplay);
> + }
>
> return true;
>
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index f35fd6609457..de5deced2548 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1622,10 +1622,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> - connector->base.display_info.panel_orientation =
> - vlv_dsi_get_panel_orientation(connector);
> - drm_connector_init_panel_orientation_property(
> + drm_connector_set_panel_orientation_with_quirk(
> &connector->base,
> + vlv_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> connector->panel.fixed_mode->vdisplay);
> }
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3b65badd1efd..43aa193395b5 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1552,8 +1552,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
> uint64_t link_status);
> void drm_connector_set_vrr_capable_property(
> struct drm_connector *connector, bool capable);
> -int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height);
> +int drm_connector_set_panel_orientation(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation);
> +int drm_connector_set_panel_orientation_with_quirk(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation,
> + int width, int height);
> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
> int min, int max);
--
Jani Nikula, Intel Open Source Graphics Center
More information about the dri-devel
mailing list