[PATCH v2 1/2] dt-bindings: display: add sc7180 panel variant

[Matthias Kaehlcke]

Hi,

On Tue, Jan 07, 2020 at 04:59:56PM +0530, Harigovindan P wrote:
> Subject: dt-bindings: display: add sc7180 panel variant
>
> Add a compatible string to support sc7180 panel version.

The sc7180 is a SoC, I suppose you are referring to the sc7180-idp, a
board based on this SoC. But even with the correct board name, this
isn't a good commit message. The board is irrelevant here, the display
could be used on dozens of other boards.

Apparently the panel is the Visionix RM69299, please use this instead
of 'sc7180'.

Thanks

Matthias

> Changes in v1:
> 	-Added a compatible string to support sc7180 panel version.
> Changes in v2:
> 	-Removed unwanted properties from description.
> 	-Creating source files without execute permissions(Rob Herring).
> 
> Signed-off-by: Harigovindan P <harigovi at codeaurora.org>
> ---
>  .../bindings/display/visionox,rm69299.txt          | 48 ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/visionox,rm69299.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/visionox,rm69299.txt b/Documentation/devicetree/bindings/display/visionox,rm69299.txt
> new file mode 100644
> index 0000000..d7bbd5f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/visionox,rm69299.txt
> @@ -0,0 +1,48 @@
> +Visionox model RM69299 DSI display driver
> +
> +The Visionox RM69299 is a generic display driver, currently only configured
> +for use in the 1080p display on the Qualcomm SC7180 MTP board.
> +
> +Required properties:
> +- compatible: should be "visionox,rm69299-1080p-display"
> +- vdda-supply: phandle of the regulator that provides the supply voltage
> +  Power IC supply
> +- vdd3p3-supply: phandle of the regulator that provides the supply voltage
> +  Power IC supply
> +- reset-gpios: phandle of gpio for reset line
> +  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
> +  (active low)
> +- ports: This device has one video port driven by one DSI. Their connections
> +  are modeled using the OF graph bindings specified in
> +  Documentation/devicetree/bindings/graph.txt.
> +  - port at 0: DSI input port driven by master DSI
> +
> +Example:
> +
> +	dsi at ae94000 {
> +		panel at 0 {
> +			compatible = "visionox,rm69299-1080p-display";
> +			reg = <0>;
> +
> +			vdda-supply = <&src_pp1800_l8c>;
> +			vdd3p3-supply = <&src_pp2800_l18a>;
> +
> +			pinctrl-names = "default", "suspend";
> +			pinctrl-0 = <&disp_pins_default>;
> +			pinctrl-1 = <&disp_pins_default>;
> +
> +			reset-gpios = <&pm6150l_gpios 3 0>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				port at 0 {
> +					reg = <0>;
> +					panel0_in: endpoint {
> +						remote-endpoint = <&dsi0_out>;
> +					};
> +				};
> +			};
> +		};
> +	};
> -- 
> 2.7.4
>