[PATCH 2/4] drm/i915/display: conversion to new logging macros part 2
Wambui Karuga
wambui.karugax at gmail.com
Thu Jan 16 13:09:45 UTC 2020
This patch continues the conversion of printk based logging macros to
the new struct drm_based logging macros in
drm/i915/display/intel_display.c.
This conversion was done using the following coccinelle script that
matches the existence of a straightforward struct drm_i915_private in
the functions:
@rule1@
identifier fn, T;
@@
fn(struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@rule2@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
New checkpatch warnings were addressed manually.
Signed-off-by: Wambui Karuga <wambui.karugax at gmail.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 232 +++++++++++--------
1 file changed, 140 insertions(+), 92 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e06c2e14b57d..af8f1e0914a5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7535,8 +7535,9 @@ static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
state = drm_atomic_state_alloc(&dev_priv->drm);
if (!state) {
- DRM_DEBUG_KMS("failed to disable [CRTC:%d:%s], out of memory",
- crtc->base.base.id, crtc->base.name);
+ drm_dbg_kms(&dev_priv->drm,
+ "failed to disable [CRTC:%d:%s], out of memory",
+ crtc->base.base.id, crtc->base.name);
return;
}
@@ -7552,8 +7553,9 @@ static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
drm_atomic_state_put(state);
- DRM_DEBUG_KMS("[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
- crtc->base.base.id, crtc->base.name);
+ drm_dbg_kms(&dev_priv->drm,
+ "[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
+ crtc->base.base.id, crtc->base.name);
crtc->active = false;
crtc->base.enabled = false;
@@ -7598,7 +7600,8 @@ int intel_display_suspend(struct drm_device *dev)
state = drm_atomic_helper_suspend(dev);
ret = PTR_ERR_OR_ZERO(state);
if (ret)
- DRM_ERROR("Suspending crtc's failed with %i\n", ret);
+ drm_err(&dev_priv->drm, "Suspending crtc's failed with %i\n",
+ ret);
else
dev_priv->modeset_restore_state = state;
return ret;
@@ -7667,18 +7670,21 @@ static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
struct intel_crtc *other_crtc;
struct intel_crtc_state *other_crtc_state;
- DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
+ drm_dbg_kms(&dev_priv->drm,
+ "checking fdi config on pipe %c, lanes %i\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
if (pipe_config->fdi_lanes > 4) {
- DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
+ drm_dbg_kms(&dev_priv->drm,
+ "invalid fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
return -EINVAL;
}
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
if (pipe_config->fdi_lanes > 2) {
- DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
- pipe_config->fdi_lanes);
+ drm_dbg_kms(&dev_priv->drm,
+ "only 2 lanes on haswell, required: %i lanes\n",
+ pipe_config->fdi_lanes);
return -EINVAL;
} else {
return 0;
@@ -7703,15 +7709,17 @@ static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
return PTR_ERR(other_crtc_state);
if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
+ drm_dbg_kms(&dev_priv->drm,
+ "invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
return -EINVAL;
}
return 0;
case PIPE_C:
if (pipe_config->fdi_lanes > 2) {
- DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
+ drm_dbg_kms(&dev_priv->drm,
+ "only 2 lanes on pipe %c: required %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
return -EINVAL;
}
@@ -7722,7 +7730,8 @@ static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
return PTR_ERR(other_crtc_state);
if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
- DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "fdi link B uses too many lanes to enable link C\n");
return -EINVAL;
}
return 0;
@@ -7919,9 +7928,10 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
}
if (adjusted_mode->crtc_clock > clock_limit) {
- DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
- adjusted_mode->crtc_clock, clock_limit,
- yesno(pipe_config->double_wide));
+ drm_dbg_kms(&dev_priv->drm,
+ "requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
+ adjusted_mode->crtc_clock, clock_limit,
+ yesno(pipe_config->double_wide));
return -EINVAL;
}
@@ -7933,7 +7943,8 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
* for output conversion from RGB->YCBCR. So if CTM is already
* applied we can't support YCBCR420 output.
*/
- DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "YCBCR420 and CTM together are not possible\n");
return -EINVAL;
}
@@ -7945,13 +7956,15 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
*/
if (pipe_config->pipe_src_w & 1) {
if (pipe_config->double_wide) {
- DRM_DEBUG_KMS("Odd pipe source width not supported with double wide pipe\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Odd pipe source width not supported with double wide pipe\n");
return -EINVAL;
}
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
intel_is_dual_link_lvds(dev_priv)) {
- DRM_DEBUG_KMS("Odd pipe source width not supported with dual link LVDS\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Odd pipe source width not supported with dual link LVDS\n");
return -EINVAL;
}
}
@@ -8036,9 +8049,10 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
DREF_SSC1_ENABLE;
if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
- DRM_DEBUG_KMS("SSC %s by BIOS, overriding VBT which says %s\n",
- enableddisabled(bios_lvds_use_ssc),
- enableddisabled(dev_priv->vbt.lvds_use_ssc));
+ drm_dbg_kms(&dev_priv->drm,
+ "SSC %s by BIOS, overriding VBT which says %s\n",
+ enableddisabled(bios_lvds_use_ssc),
+ enableddisabled(dev_priv->vbt.lvds_use_ssc));
dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
}
}
@@ -8868,7 +8882,9 @@ static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+ drm_dbg_kms(&dev_priv->drm,
+ "using SSC reference clock of %d kHz\n",
+ refclk);
}
limit = &intel_limits_i8xx_lvds;
@@ -8881,7 +8897,8 @@ static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&dev_priv->drm,
+ "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -8903,7 +8920,9 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+ drm_dbg_kms(&dev_priv->drm,
+ "using SSC reference clock of %d kHz\n",
+ refclk);
}
if (intel_is_dual_link_lvds(dev_priv))
@@ -8923,7 +8942,8 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&dev_priv->drm,
+ "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -8946,7 +8966,9 @@ static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+ drm_dbg_kms(&dev_priv->drm,
+ "using SSC reference clock of %d kHz\n",
+ refclk);
}
limit = &pnv_limits_lvds;
@@ -8957,7 +8979,8 @@ static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&dev_priv->drm,
+ "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -8980,7 +9003,9 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
+ drm_dbg_kms(&dev_priv->drm,
+ "using SSC reference clock of %d kHz\n",
+ refclk);
}
limit = &intel_limits_i9xx_lvds;
@@ -8991,7 +9016,8 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&dev_priv->drm,
+ "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
@@ -9126,7 +9152,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
if (!intel_fb) {
- DRM_DEBUG_KMS("failed to alloc fb\n");
+ drm_dbg_kms(&dev_priv->drm, "failed to alloc fb\n");
return;
}
@@ -9179,10 +9205,11 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
plane_config->size = fb->pitches[0] * aligned_height;
- DRM_DEBUG_KMS("%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
- crtc->base.name, plane->base.name, fb->width, fb->height,
- fb->format->cpp[0] * 8, base, fb->pitches[0],
- plane_config->size);
+ drm_dbg_kms(&dev_priv->drm,
+ "%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
+ crtc->base.name, plane->base.name, fb->width, fb->height,
+ fb->format->cpp[0] * 8, base, fb->pitches[0],
+ plane_config->size);
plane_config->fb = intel_fb;
}
@@ -9429,8 +9456,9 @@ static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
}
}
- DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
- has_panel, has_lvds, has_ck505, using_ssc_source);
+ drm_dbg_kms(&dev_priv->drm,
+ "has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
+ has_panel, has_lvds, has_ck505, using_ssc_source);
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
@@ -9489,7 +9517,7 @@ static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
/* SSC must be turned on before enabling the CPU output */
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
- DRM_DEBUG_KMS("Using SSC on panel\n");
+ drm_dbg_kms(&dev_priv->drm, "Using SSC on panel\n");
val |= DREF_SSC1_ENABLE;
} else
val &= ~DREF_SSC1_ENABLE;
@@ -9504,7 +9532,8 @@ static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
/* Enable CPU source on CPU attached eDP */
if (has_cpu_edp) {
if (intel_panel_use_ssc(dev_priv) && can_ssc) {
- DRM_DEBUG_KMS("Using SSC on eDP\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Using SSC on eDP\n");
val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
} else
val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
@@ -9515,7 +9544,7 @@ static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
} else {
- DRM_DEBUG_KMS("Disabling CPU source output\n");
+ drm_dbg_kms(&dev_priv->drm, "Disabling CPU source output\n");
val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
@@ -9527,7 +9556,7 @@ static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
udelay(200);
if (!using_ssc_source) {
- DRM_DEBUG_KMS("Disabling SSC source\n");
+ drm_dbg_kms(&dev_priv->drm, "Disabling SSC source\n");
/* Turn off the SSC source */
val &= ~DREF_SSC_SOURCE_MASK;
@@ -9555,7 +9584,7 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
if (wait_for_us(I915_READ(SOUTH_CHICKEN2) &
FDI_MPHY_IOSFSB_RESET_STATUS, 100))
- DRM_ERROR("FDI mPHY reset assert timeout\n");
+ drm_err(&dev_priv->drm, "FDI mPHY reset assert timeout\n");
tmp = I915_READ(SOUTH_CHICKEN2);
tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
@@ -9563,7 +9592,7 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
if (wait_for_us((I915_READ(SOUTH_CHICKEN2) &
FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
- DRM_ERROR("FDI mPHY reset de-assert timeout\n");
+ drm_err(&dev_priv->drm, "FDI mPHY reset de-assert timeout\n");
}
/* WaMPhyProgramming:hsw */
@@ -9845,17 +9874,17 @@ static void lpt_init_pch_refclk(struct drm_i915_private *dev_priv)
dev_priv->pch_ssc_use = 0;
if (spll_uses_pch_ssc(dev_priv)) {
- DRM_DEBUG_KMS("SPLL using PCH SSC\n");
+ drm_dbg_kms(&dev_priv->drm, "SPLL using PCH SSC\n");
dev_priv->pch_ssc_use |= BIT(DPLL_ID_SPLL);
}
if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL1)) {
- DRM_DEBUG_KMS("WRPLL1 using PCH SSC\n");
+ drm_dbg_kms(&dev_priv->drm, "WRPLL1 using PCH SSC\n");
dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL1);
}
if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL2)) {
- DRM_DEBUG_KMS("WRPLL2 using PCH SSC\n");
+ drm_dbg_kms(&dev_priv->drm, "WRPLL2 using PCH SSC\n");
dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL2);
}
@@ -10161,8 +10190,9 @@ static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
- DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
- dev_priv->vbt.lvds_ssc_freq);
+ drm_dbg_kms(&dev_priv->drm,
+ "using SSC reference clock of %d kHz\n",
+ dev_priv->vbt.lvds_ssc_freq);
refclk = dev_priv->vbt.lvds_ssc_freq;
}
@@ -10184,15 +10214,17 @@ static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_err(&dev_priv->drm,
+ "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
ilk_compute_dpll(crtc, crtc_state, NULL);
if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
- DRM_DEBUG_KMS("failed to find PLL for pipe %c\n",
- pipe_name(crtc->pipe));
+ drm_dbg_kms(&dev_priv->drm,
+ "failed to find PLL for pipe %c\n",
+ pipe_name(crtc->pipe));
return -EINVAL;
}
@@ -10323,7 +10355,7 @@ skl_get_initial_plane_config(struct intel_crtc *crtc,
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
if (!intel_fb) {
- DRM_DEBUG_KMS("failed to alloc fb\n");
+ drm_dbg_kms(&dev_priv->drm, "failed to alloc fb\n");
return;
}
@@ -10420,10 +10452,11 @@ skl_get_initial_plane_config(struct intel_crtc *crtc,
plane_config->size = fb->pitches[0] * aligned_height;
- DRM_DEBUG_KMS("%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
- crtc->base.name, plane->base.name, fb->width, fb->height,
- fb->format->cpp[0] * 8, base, fb->pitches[0],
- plane_config->size);
+ drm_dbg_kms(&dev_priv->drm,
+ "%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
+ crtc->base.name, plane->base.name, fb->width, fb->height,
+ fb->format->cpp[0] * 8, base, fb->pitches[0],
+ plane_config->size);
plane_config->fb = intel_fb;
return;
@@ -10587,8 +10620,9 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
intel_get_crtc_new_encoder(state, crtc_state);
if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
- DRM_DEBUG_KMS("failed to find PLL for pipe %c\n",
- pipe_name(crtc->pipe));
+ drm_dbg_kms(&dev_priv->drm,
+ "failed to find PLL for pipe %c\n",
+ pipe_name(crtc->pipe));
return -EINVAL;
}
}
@@ -10664,7 +10698,7 @@ static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
id = DPLL_ID_SKL_DPLL2;
break;
default:
- DRM_ERROR("Incorrect port type\n");
+ drm_err(&dev_priv->drm, "Incorrect port type\n");
return;
}
@@ -11185,7 +11219,8 @@ static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
plane_state, 0);
if (src_x != 0 || src_y != 0) {
- DRM_DEBUG_KMS("Arbitrary cursor panning not supported\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "Arbitrary cursor panning not supported\n");
return -EINVAL;
}
@@ -11518,9 +11553,10 @@ static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
/* Check for which cursor types we support */
if (!i9xx_cursor_size_ok(plane_state)) {
- DRM_DEBUG("Cursor dimension %dx%d not supported\n",
- drm_rect_width(&plane_state->uapi.dst),
- drm_rect_height(&plane_state->uapi.dst));
+ drm_dbg(&dev_priv->drm,
+ "Cursor dimension %dx%d not supported\n",
+ drm_rect_width(&plane_state->uapi.dst),
+ drm_rect_height(&plane_state->uapi.dst));
return -EINVAL;
}
@@ -11529,9 +11565,10 @@ static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
if (fb->pitches[0] !=
drm_rect_width(&plane_state->uapi.dst) * fb->format->cpp[0]) {
- DRM_DEBUG_KMS("Invalid cursor stride (%u) (cursor width %d)\n",
- fb->pitches[0],
- drm_rect_width(&plane_state->uapi.dst));
+ drm_dbg_kms(&dev_priv->drm,
+ "Invalid cursor stride (%u) (cursor width %d)\n",
+ fb->pitches[0],
+ drm_rect_width(&plane_state->uapi.dst));
return -EINVAL;
}
@@ -11547,7 +11584,8 @@ static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
*/
if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
plane_state->uapi.visible && plane_state->uapi.dst.x1 < 0) {
- DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "CHV cursor C not allowed to straddle the left screen edge\n");
return -EINVAL;
}
@@ -11735,9 +11773,9 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
struct intel_crtc_state *crtc_state;
int ret, i = -1;
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
- connector->base.id, connector->name,
- encoder->base.id, encoder->name);
+ drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+ connector->base.id, connector->name,
+ encoder->base.id, encoder->name);
old->restore_state = NULL;
@@ -11788,7 +11826,8 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
* If we didn't find an unused CRTC, don't use any.
*/
if (!crtc) {
- DRM_DEBUG_KMS("no pipe available for load-detect\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "no pipe available for load-detect\n");
ret = -ENODEV;
goto fail;
}
@@ -11839,13 +11878,16 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
if (!ret)
ret = drm_atomic_add_affected_planes(restore_state, crtc);
if (ret) {
- DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
+ drm_dbg_kms(&dev_priv->drm,
+ "Failed to create a copy of old state to restore: %i\n",
+ ret);
goto fail;
}
ret = drm_atomic_commit(state);
if (ret) {
- DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
+ drm_dbg_kms(&dev_priv->drm,
+ "failed to set mode on load-detect pipe\n");
goto fail;
}
@@ -11956,8 +11998,9 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
7 : 14;
break;
default:
- DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
- "mode\n", (int)(dpll & DPLL_MODE_MASK));
+ drm_dbg_kms(&dev_priv->drm,
+ "Unknown DPLL mode %08x in programmed "
+ "mode\n", (int)(dpll & DPLL_MODE_MASK));
return;
}
@@ -12203,11 +12246,12 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_stat
turn_off = was_visible && (!visible || mode_changed);
turn_on = visible && (!was_visible || mode_changed);
- DRM_DEBUG_ATOMIC("[CRTC:%d:%s] with [PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
- crtc->base.base.id, crtc->base.name,
- plane->base.base.id, plane->base.name,
- was_visible, visible,
- turn_off, turn_on, mode_changed);
+ drm_dbg_atomic(&dev_priv->drm,
+ "[CRTC:%d:%s] with [PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
+ crtc->base.base.id, crtc->base.name,
+ plane->base.base.id, plane->base.name,
+ was_visible, visible,
+ turn_off, turn_on, mode_changed);
if (turn_on) {
if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
@@ -12384,8 +12428,9 @@ static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state)
}
if (!linked_state) {
- DRM_DEBUG_KMS("Need %d free Y planes for planar YUV\n",
- hweight8(crtc_state->nv12_planes));
+ drm_dbg_kms(&dev_priv->drm,
+ "Need %d free Y planes for planar YUV\n",
+ hweight8(crtc_state->nv12_planes));
return -EINVAL;
}
@@ -12396,7 +12441,8 @@ static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state)
linked_state->planar_linked_plane = plane;
crtc_state->active_planes |= BIT(linked->id);
crtc_state->update_planes |= BIT(linked->id);
- DRM_DEBUG_KMS("Using %s as Y plane for %s\n", linked->base.name, plane->base.name);
+ drm_dbg_kms(&dev_priv->drm, "Using %s as Y plane for %s\n",
+ linked->base.name, plane->base.name);
/* Copy parameters to slave plane */
linked_state->ctl = plane_state->ctl | PLANE_CTL_YUV420_Y_PLANE;
@@ -12528,8 +12574,9 @@ static int icl_compute_port_sync_crtc_state(struct drm_connector *connector,
drm_connector_list_iter_end(&conn_iter);
if (!master_crtc) {
- DRM_DEBUG_KMS("Could not find Master CRTC for Slave CRTC %d\n",
- crtc->base.id);
+ drm_dbg_kms(&dev_priv->drm,
+ "Could not find Master CRTC for Slave CRTC %d\n",
+ crtc->base.id);
return -EINVAL;
}
@@ -12542,10 +12589,11 @@ static int icl_compute_port_sync_crtc_state(struct drm_connector *connector,
crtc_state->master_transcoder = master_pipe_config->cpu_transcoder;
master_pipe_config->sync_mode_slaves_mask |=
BIT(crtc_state->cpu_transcoder);
- DRM_DEBUG_KMS("Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
- transcoder_name(crtc_state->master_transcoder),
- crtc->base.id,
- master_pipe_config->sync_mode_slaves_mask);
+ drm_dbg_kms(&dev_priv->drm,
+ "Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
+ transcoder_name(crtc_state->master_transcoder),
+ crtc->base.id,
+ master_pipe_config->sync_mode_slaves_mask);
return 0;
}
--
2.24.1
More information about the dri-devel
mailing list