[PATCH v2] dt-bindings: display: Convert a bunch of panels to DT schema

[Sam Ravnborg]

Hi Rob.

On Fri, Jan 17, 2020 at 05:17:56PM -0600, Rob Herring wrote:
> Convert all the 'simple' panels which match the constraints of the
> common panel-simple.yaml schema. This conversion is based on how the
> panels are documented. Some may turn out to be more complex once the
> schema is applied to actual dts files.

Thanks for updating this patch - and very good to reduce the number of
files with almost the same content.

One comment below, with that addressed:
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

There are likely some dt files that assume panels need no power and need a
fixed-regulator or something as power-supply now is mandatory.
Should this be checked before we apply this patch?

As we continue to see new panels more or less every week I would like
this patch applied to drm-misc-next as soon as possible to avoid any
future conflicts.

> index 513f03466aba..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
> -
> -This binding is compatible with the simple-panel binding, which is specified
> -in simple-panel.txt in this directory.
> -
> -Required properties:
> -- compatible: should be "innolux,p120zdg-bf1"
> -- power-supply: regulator to provide the supply voltage
> -
> -Optional properties:
> -- enable-gpios: GPIO pin to enable or disable the panel
> -- backlight: phandle of the backlight device attached to the panel
> -- no-hpd: If HPD isn't hooked up; add this property.

panel-simple.yaml does not include the no-hpd property.
We only have 2 bindings, this and sharp,ld-d5116z01b.yaml
that include the no-hpd property.

We have two options:
1) add the no-hpd property to panel-simple.yaml
2) keep an independent binding for panels using no-hpd

I suggest to keep an independent binding for innolux,p120zdg-bf1
so we keep panel-simple.yaml slim.
In other words do not delete this file and remove the compatible from
panel-simple.yaml

	Sam