[PATCH] drm/amdgpu: Stop using the DRIVER debugging flag for vblank debugging messages
Harry Wentland
hwentlan at amd.com
Fri Jan 24 14:48:39 UTC 2020
On 2020-01-23 8:07 p.m., Lyude Paul wrote:
> These are some very loud debug statements that get printed on every
> vblank when driver level debug printing is enabled in DRM, and doesn't
> really tell us anything that isn't related to vblanks. So let's move
> this over to the proper debug flag to be a little less spammy with our
> debug output.
>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
Thanks. Great change.
Reviewed-by: Harry Wentland <harry.wentland at amd.com>
Harry
> ---
> drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 9402374d2466..3675e1c32707 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -407,8 +407,9 @@ static void dm_vupdate_high_irq(void *interrupt_params)
> if (acrtc) {
> acrtc_state = to_dm_crtc_state(acrtc->base.state);
>
> - DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
> - amdgpu_dm_vrr_active(acrtc_state));
> + DRM_DEBUG_VBL("crtc:%d, vupdate-vrr:%d\n",
> + acrtc->crtc_id,
> + amdgpu_dm_vrr_active(acrtc_state));
>
> /* Core vblank handling is done here after end of front-porch in
> * vrr mode, as vblank timestamping will give valid results
> @@ -458,8 +459,9 @@ static void dm_crtc_high_irq(void *interrupt_params)
> if (acrtc) {
> acrtc_state = to_dm_crtc_state(acrtc->base.state);
>
> - DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
> - amdgpu_dm_vrr_active(acrtc_state));
> + DRM_DEBUG_VBL("crtc:%d, vupdate-vrr:%d\n",
> + acrtc->crtc_id,
> + amdgpu_dm_vrr_active(acrtc_state));
>
> /* Core vblank handling at start of front-porch is only possible
> * in non-vrr mode, as only there vblank timestamping will give
> @@ -522,8 +524,8 @@ static void dm_dcn_crtc_high_irq(void *interrupt_params)
>
> acrtc_state = to_dm_crtc_state(acrtc->base.state);
>
> - DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
> - amdgpu_dm_vrr_active(acrtc_state));
> + DRM_DEBUG_VBL("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
> + amdgpu_dm_vrr_active(acrtc_state));
>
> amdgpu_dm_crtc_handle_crc_irq(&acrtc->base);
> drm_crtc_handle_vblank(&acrtc->base);
>
More information about the dri-devel
mailing list