[PATCH v9 07/12] drm/imx: pd: Use bus format/flags provided by the bridge when available

[Philipp Zabel]

Hi Boris,

On Mon, 2020-01-27 at 12:00 +0100, Boris Brezillon wrote:
> Now that bridges can expose the bus format/flags they expect, we can
> use those instead of the relying on the display_info provided by the
> connector (which is only valid if the encoder is directly connected
> to bridge element driving the panel/display).
> 
> We also explicitly expose the bus formats supported by our encoder by
> filling encoder->output_bus_caps with proper info.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
> ---
> Changes in v7:
> * Add an imx_pd_format_supported() helper (suggested by Philipp)
> * Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp)
> * Simplify imx_pd_bridge_atomic_get_input_bus_fmts()
> * Explicitly set the duplicate/destro_state() and reset() hooks
> 
> Changes in v3 (all suggested by Philipp):
> * Adjust to match core changes
> * Propagate output format to input format
> * Pick a default value when output_fmt = _FIXED
> * Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[]
> 
> Changes in v2:
> * Adjust things to match the new bus-format negotiation infra
> ---
>  drivers/gpu/drm/imx/parallel-display.c | 176 +++++++++++++++++++++----
>  1 file changed, 151 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
> index 3dca424059f7..031579aa7fc2 100644
> --- a/drivers/gpu/drm/imx/parallel-display.c
> +++ b/drivers/gpu/drm/imx/parallel-display.c
> @@ -24,6 +24,7 @@
[...]
> +static u32 *
> +imx_pd_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +					struct drm_bridge_state *bridge_state,
> +					struct drm_crtc_state *crtc_state,
> +					struct drm_connector_state *conn_state,
> +					u32 output_fmt,
> +					unsigned int *num_input_fmts)
> +{
> +	struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge);
> +	u32 *input_fmts;
> +
> +	/*
> +	 * If the next bridge does not support bus format negotiation, let's
> +	 * use the static bus format definition (imxpd->bus_format) if it's
> +	 * specified, RGB888 when it's not.
> +	 */
> +	if (output_fmt == MEDIA_BUS_FMT_FIXED)
> +		output_fmt = imxpd->bus_format ? : MEDIA_BUS_FMT_RGB888_1X24;
> +
> +	/* Now make sure the requested output format is supported. */
> +	if ((imxpd->bus_format && imxpd->bus_format != output_fmt) ||
> +	    !imx_pd_format_supported(output_fmt)) {
> +		*num_input_fmts = 0;
> +		return NULL;
> +	}
> +
> +	*num_input_fmts = 1;
> +	input_fmts = kcalloc(*num_input_fmts, sizeof(*input_fmts),
> +			     GFP_KERNEL);

You could just use kzalloc() here.

> +	if (!input_fmts)
> +		return NULL;
> +
> +	input_fmts[0] = output_fmt;
> +	return input_fmts;
> +}
> +
> +static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
> +				      struct drm_bridge_state *bridge_state,
> +				      struct drm_crtc_state *crtc_state,
> +				      struct drm_connector_state *conn_state)
> +{
> +	struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
> +	struct drm_display_info *di = &conn_state->connector->display_info;
> +	struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge);
> +	struct drm_bridge_state *next_bridge_state = NULL;
> +	struct drm_bridge *next_bridge;
> +	u32 bus_flags, bus_fmt;
> +
> +	next_bridge = drm_bridge_get_next_bridge(bridge);
> +	if (next_bridge)
> +		next_bridge_state = drm_atomic_get_new_bridge_state(crtc_state->state,
> +								    next_bridge);
> +
> +	if (next_bridge_state)
> +		bus_flags = next_bridge_state->input_bus_cfg.flags;
> +	else if (!imxpd->bus_format && di->num_bus_formats)
> +		bus_flags = di->bus_flags;
> +	else
> +		bus_flags = imxpd->bus_flags;
> +
> +	bus_fmt = bridge_state->input_bus_cfg.format;
> +	if (!imx_pd_format_supported(bus_fmt))
> +		return -EINVAL;
> +
> +	if (bus_flags &
> +	    ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
> +	      DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> +	      DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE))

Maybe add a warning so the first person to hook up a bridge / panel with
unsupported flags knows where to look.

Otherwise this looks fine to me.

Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>

regards
Philipp