[PATCH v3] dt-bindings: one file of all simple DSI panels

Rob Herring robh at kernel.org
Thu Jan 30 14:48:19 UTC 2020


On Thu, Jan 30, 2020 at 2:45 AM Benjamin Gaignard
<benjamin.gaignard at st.com> wrote:
>
> From: Sam Ravnborg <sam at ravnborg.org>
>
> To complement panel-simple.yaml, create panel-simple-dsi.yaml.
> panel-simple-dsi-yaml are for all simple DSP panels with a single
> power-supply and optional backlight / enable GPIO / reset GPIO.
>
> Migrate panasonic,vvx10f034n00, orisetech,otm8009a and raydium,rm68200 over to the new file.
>
> The objectives with one file for all the simple DSI panels are:
>     - Make it simpler to add bindings for simple DSI panels
>     - Keep the number of bindings file lower
>     - Keep the binding documentation for simple DSI panels more consistent
>
> Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Maxime Ripard <mripard at kernel.org>
> Cc: Yannick Fertre <yannick.fertre at st.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: dri-devel at lists.freedesktop.org
> Cc: devicetree at vger.kernel.org
> ---
> version 3:
> - add orisetech,otm8009a and raydium,rm68200 compatibles
> - add reset-gpios optional property
> - fix indentation on compatible enumeration
> => Rob had reviewed the second version but, given the changes in version 3
>    I haven't added here.
>  .../bindings/display/panel/orisetech,otm8009a.txt  | 23 -------
>  .../display/panel/panasonic,vvx10f034n00.txt       | 20 ------
>  .../bindings/display/panel/panel-simple-dsi.yaml   | 74 ++++++++++++++++++++++
>  .../bindings/display/panel/raydium,rm68200.txt     | 25 --------
>  4 files changed, 74 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> deleted file mode 100644
> index 203b03eefb68..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
> -
> -The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
> -a MIPI-DSI video interface. Its backlight is managed through the DSI link.
> -
> -Required properties:
> -  - compatible: "orisetech,otm8009a"
> -  - reg: the virtual channel number of a DSI peripheral
> -
> -Optional properties:
> -  - reset-gpios: a GPIO spec for the reset pin (active low).
> -  - power-supply: phandle of the regulator that provides the supply voltage.
> -
> -Example:
> -&dsi {
> -       ...
> -       panel at 0 {
> -               compatible = "orisetech,otm8009a";
> -               reg = <0>;
> -               reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
> -               power-supply = <&v1v8>;
> -       };
> -};
> diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
> deleted file mode 100644
> index 37dedf6a6702..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -Panasonic 10" WUXGA TFT LCD panel
> -
> -Required properties:
> -- compatible: should be "panasonic,vvx10f034n00"
> -- reg: DSI virtual channel of the peripheral
> -- power-supply: phandle of the regulator that provides the supply voltage
> -
> -Optional properties:
> -- backlight: phandle of the backlight device attached to the panel
> -
> -Example:
> -
> -       mdss_dsi at fd922800 {
> -               panel at 0 {
> -                       compatible = "panasonic,vvx10f034n00";
> -                       reg = <0>;
> -                       power-supply = <&vreg_vsp>;
> -                       backlight = <&lp8566_wled>;
> -               };
> -       };
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
> new file mode 100644
> index 000000000000..1168b8186490
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Simple DSI panels with a single power-supply
> +
> +maintainers:
> +  - Thierry Reding <thierry.reding at gmail.com>
> +  - Sam Ravnborg <sam at ravnborg.org>
> +
> +description: |
> +  This binding file is a collection of the DSI panels that
> +  requires only a single power-supply.
> +  There are optionally a backlight and an enable GPIO.
> +  The panel may use an OF graph binding for the association to the display,
> +  or it may be a direct child node of the display.
> +
> +  If the panel is more advanced a dedicated binding file is required.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +
> +  compatible:
> +    enum:
> +      # compatible must be listed in alphabetical order, ordered by compatible.
> +      # The description in the comment is mandatory for each compatible.
> +
> +        # Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD
> +      - orisetech,otm8009a
> +        # Panasonic 10" WUXGA TFT LCD panel
> +      - panasonic,vvx10f034n00
> +        # Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
> +      - raydium,rm68200
> +
> +  reg:
> +    maxItems: 1
> +    description: DSI virtual channel
> +
> +  reset-gpios:
> +    maxItems : 1

Can we keep whether to add 'reset-gpios' a separate discussion. If we
do add it, then it should go in panel-common.yaml and
panel-simple.yaml.

Rob


More information about the dri-devel mailing list