[PATCH] omapfb: dss: Fix max fclk divider for omap36xx

[Adam Ford]

On Mon, Jul 6, 2020 at 6:18 AM Adam Ford <aford173 at gmail.com> wrote:
>
> On Mon, Jul 6, 2020 at 1:02 AM Tomi Valkeinen <tomi.valkeinen at ti.com> wrote:
> >
> > Hi,
> >
> > On 03/07/2020 22:36, Sam Ravnborg wrote:
> > > Hi Tomi.
> > >
> > > On Fri, Jul 03, 2020 at 10:17:29AM +0300, Tomi Valkeinen wrote:
> > >> On 30/06/2020 21:26, Adam Ford wrote:
> > >>> The drm/omap driver was fixed to correct an issue where using a
> > >>> divider of 32 breaks the DSS despite the TRM stating 32 is a valid
> > >>> number.  Through experimentation, it appears that 31 works, and
> > >>> it is consistent with the value used by the drm/omap driver.
> > >>>
> > >>> This patch fixes the divider for fbdev driver instead of the drm.
> > >>>
> > >>> Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > >>>
> > >>> Cc: <stable at vger.kernel.org> #4.9+
> > >>> Signed-off-by: Adam Ford <aford173 at gmail.com>
> > >>> ---
> > >>> Linux 4.4 will need a similar patch, but it doesn't apply cleanly.
> > >>>
> > >>> The DRM version of this same fix is:
> > >>> e2c4ed148cf3 ("drm/omap: fix max fclk divider for omap36xx")
> > >>>
> > >>>
> > >>> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> index 7252d22dd117..bfc5c4c5a26a 100644
> > >>> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
> > >>> @@ -833,7 +833,7 @@ static const struct dss_features omap34xx_dss_feats = {
> > >>>    };
> > >>>    static const struct dss_features omap3630_dss_feats = {
> > >>> -   .fck_div_max            =       32,
> > >>> +   .fck_div_max            =       31,
> > >>>     .dss_fck_multiplier     =       1,
> > >>>     .parent_clk_name        =       "dpll4_ck",
> > >>>     .dpi_select_source      =       &dss_dpi_select_source_omap2_omap3,
> > >>>
> > >>
> > >> Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > > Will you apply to drm-misc?
> >
> > This is for fbdev, so I presume Bartlomiej will pick this one.
> >
> > > Note  following output from "dim fixes":
> > > $ dim fixes f76ee892a99e
> > > Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
> > > Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > > Cc: Dave Airlie <airlied at gmail.com>
> > > Cc: Rob Clark <robdclark at gmail.com>
> > > Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > Cc: Sam Ravnborg <sam at ravnborg.org>
> > > Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
> > > Cc: Jason Yan <yanaijie at huawei.com>
> > > Cc: "Andrew F. Davis" <afd at ti.com>
> > > Cc: YueHaibing <yuehaibing at huawei.com>
> > > Cc: <stable at vger.kernel.org> # v4.5+
> > >
> > > Here it says the fix is valid from v4.5 onwards.
> >
> > Hmm... Adam, you marked the fix to apply to v4.9+, and then you said
> > v4.4 needs a new patch (that's before the big copy/rename). Did you
> > check the versions between 4.4 and 4.9? I would guess this one applies
> > to v4.5+.
>
> I only tried 4.9 because it's listed as an LTS kernel.  The stuff
> between 4.4 and 4.9 were EOL, so I didn't go back further.    The 4.5+
> is probably more accurate.  I would like to do the same thing for the
> 4.4 kernel, but I am not sure the proper way to do that.

What is the correct protocol for patching 4.4?  I'd like to do that,
but the patch would be unique to the 4.4.  Should I just submit the
patch directly to stable and cc Tomi?

adam
>
> adam
> >
> >   Tomi
> >
> > --
> > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki