[PATCH v4 75/78] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings

[Maxime Ripard]

The HDMI controllers found in the BCM2711 SoC need some adjustments to the
bindings, especially since the registers have been shuffled around in more
register ranges.

Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
new file mode 100644
index 000000000000..6091fe3d315b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+
+maintainers:
+  - Eric Anholt <eric at anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi0
+      - brcm,bcm2711-hdmi1
+
+  reg:
+    items:
+      - description: HDMI controller register range
+      - description: DVP register range
+      - description: HDMI PHY register range
+      - description: Rate Manager register range
+      - description: Packet RAM register range
+      - description: Metadata RAM register range
+      - description: CSC register range
+      - description: CEC register range
+      - description: HD register range
+
+  reg-names:
+    items:
+      - const: hdmi
+      - const: dvp
+      - const: phy
+      - const: rm
+      - const: packet
+      - const: metadata
+      - const: csc
+      - const: cec
+      - const: hd
+
+  clocks:
+    description: The HDMI state machine clock
+
+  clock-names:
+    const: hdmi
+
+  ddc:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi0: hdmi at 7ef00700 {
+        compatible = "brcm,bcm2711-hdmi0";
+        reg = <0x7ef00700 0x300>,
+              <0x7ef00300 0x200>,
+              <0x7ef00f00 0x80>,
+              <0x7ef00f80 0x80>,
+              <0x7ef01b00 0x200>,
+              <0x7ef01f00 0x400>,
+              <0x7ef00200 0x80>,
+              <0x7ef04300 0x100>,
+              <0x7ef20000 0x100>;
+        reg-names = "hdmi",
+                    "dvp",
+                    "phy",
+                    "rm",
+                    "packet",
+                    "metadata",
+                    "csc",
+                    "cec",
+                    "hd";
+        clocks = <&firmware_clocks 13>;
+        clock-names = "hdmi";
+        resets = <&dvp 0>;
+        ddc = <&ddc0>;
+    };
+
+...
-- 
git-series 0.9.1