[PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs

Philippe CORNU philippe.cornu at st.com
Thu Jul 9 07:56:10 UTC 2020


On 7/8/20 7:08 PM, Angelo Ribeiro wrote:
> Hi,
> 
> Is this patch good to go?
> @daniel at ffwll.ch, @Philippe CORNU
> 
> Was already tested by @Yannick FERTRE
> and @Adrian Pop
> on https://lkml.org/lkml/2020/4/6/691 .
> 
> Thanks,
> Angelo
> 
> From: Yannick
> FERTRE <yannick.fertre at st.com>
> Date: Wed, Jun 24, 2020 at 16:35:04
> 
>> Hello Angelo,
>> thanks for the patch.
>> Tested-by: Yannick Fertre <yannick.fertre at st.com>
>> Tested OK on STM32MP1-DISCO, DSI v1.31
>>
>> Best regards
>>
>>
>> On 4/6/20 3:49 PM, Angelo Ribeiro wrote:
>>> Add support for the video pattern generator (VPG) BER pattern mode and
>>> configuration in runtime.
>>>
>>> This enables using the debugfs interface to manipulate the VPG after
>>> the pipeline is set.
>>> Also, enables the usage of the VPG BER pattern.
>>>
>>> Changes in v2:
>>>     - Added VID_MODE_VPG_MODE
>>>     - Solved incompatible return type on __get and __set
>>>
>>> Reported-by: kbuild test robot <lkp at intel.com>
>>> Reported-by: Adrian Pop <pop.adrian61 at gmail.com>
>>> Cc: Gustavo Pimentel <gustavo.pimentel at synopsys.com>
>>> Cc: Joao Pinto <jpinto at synopsys.com>
>>> Cc: Jose Abreu <jose.abreu at synopsys.com>
>>> Signed-off-by: Angelo Ribeiro <angelo.ribeiro at synopsys.com>
>>> ---
>>>    drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 98 ++++++++++++++++++++++++---
>>>    1 file changed, 90 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> index b18351b..9de3645 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> @@ -91,6 +91,7 @@
>>>    #define VID_MODE_TYPE_BURST			0x2
>>>    #define VID_MODE_TYPE_MASK			0x3
>>>    #define VID_MODE_VPG_ENABLE		BIT(16)
>>> +#define VID_MODE_VPG_MODE		BIT(20)
>>>    #define VID_MODE_VPG_HORIZONTAL		BIT(24)
>>>    
>>>    #define DSI_VID_PKT_SIZE		0x3c
>>> @@ -221,6 +222,21 @@
>>>    #define PHY_STATUS_TIMEOUT_US		10000
>>>    #define CMD_PKT_STATUS_TIMEOUT_US	20000
>>>    
>>> +#ifdef CONFIG_DEBUG_FS
>>> +#define VPG_DEFS(name, dsi) \
>>> +	((void __force *)&((*dsi).vpg_defs.name))
>>> +
>>> +#define REGISTER(name, mask, dsi) \
>>> +	{ #name, VPG_DEFS(name, dsi), mask, dsi }
>>> +
>>> +struct debugfs_entries {
>>> +	const char				*name;
>>> +	bool					*reg;
>>> +	u32					mask;
>>> +	struct dw_mipi_dsi			*dsi;
>>> +};
>>> +#endif /* CONFIG_DEBUG_FS */
>>> +
>>>    struct dw_mipi_dsi {
>>>    	struct drm_bridge bridge;
>>>    	struct mipi_dsi_host dsi_host;
>>> @@ -238,9 +254,12 @@ struct dw_mipi_dsi {
>>>    
>>>    #ifdef CONFIG_DEBUG_FS
>>>    	struct dentry *debugfs;
>>> -
>>> -	bool vpg;
>>> -	bool vpg_horizontal;
>>> +	struct debugfs_entries *debugfs_vpg;
>>> +	struct {
>>> +		bool vpg;
>>> +		bool vpg_horizontal;
>>> +		bool vpg_ber_pattern;
>>> +	} vpg_defs;
>>>    #endif /* CONFIG_DEBUG_FS */
>>>    
>>>    	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
>>> @@ -530,9 +549,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>>>    		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>>>    
>>>    #ifdef CONFIG_DEBUG_FS
>>> -	if (dsi->vpg) {
>>> +	if (dsi->vpg_defs.vpg) {
>>>    		val |= VID_MODE_VPG_ENABLE;
>>> -		val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
>>> +		val |= dsi->vpg_defs.vpg_horizontal ?
>>> +		       VID_MODE_VPG_HORIZONTAL : 0;
>>> +		val |= dsi->vpg_defs.vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
>>>    	}
>>>    #endif /* CONFIG_DEBUG_FS */
>>>    
>>> @@ -961,6 +982,68 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>>>    
>>>    #ifdef CONFIG_DEBUG_FS
>>>    
>>> +int dw_mipi_dsi_debugfs_write(void *data, u64 val)
>>> +{
>>> +	struct debugfs_entries *vpg = data;
>>> +	struct dw_mipi_dsi *dsi;
>>> +	u32 mode_cfg;
>>> +
>>> +	if (!vpg)
>>> +		return -ENODEV;
>>> +
>>> +	dsi = vpg->dsi;
>>> +
>>> +	*vpg->reg = (bool)val;
>>> +
>>> +	mode_cfg = dsi_read(dsi, DSI_VID_MODE_CFG);
>>> +
>>> +	if (*vpg->reg)
>>> +		mode_cfg |= vpg->mask;
>>> +	else
>>> +		mode_cfg &= ~vpg->mask;
>>> +
>>> +	dsi_write(dsi, DSI_VID_MODE_CFG, mode_cfg);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +int dw_mipi_dsi_debugfs_show(void *data, u64 *val)
>>> +{
>>> +	struct debugfs_entries *vpg = data;
>>> +
>>> +	if (!vpg)
>>> +		return -ENODEV;
>>> +
>>> +	*val = *vpg->reg;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, dw_mipi_dsi_debugfs_show,
>>> +			 dw_mipi_dsi_debugfs_write, "%llu\n");
>>> +
>>> +static void debugfs_create_files(void *data)
>>> +{
>>> +	struct dw_mipi_dsi *dsi = data;
>>> +	struct debugfs_entries debugfs[] = {
>>> +		REGISTER(vpg, VID_MODE_VPG_ENABLE, dsi),
>>> +		REGISTER(vpg_horizontal, VID_MODE_VPG_HORIZONTAL, dsi),
>>> +		REGISTER(vpg_ber_pattern, VID_MODE_VPG_MODE, dsi),
>>> +	};
>>> +	int i;
>>> +
>>> +	dsi->debugfs_vpg = kmalloc(sizeof(debugfs), GFP_KERNEL);
>>> +	if (!dsi->debugfs_vpg)
>>> +		return;
>>> +
>>> +	memcpy(dsi->debugfs_vpg, debugfs, sizeof(debugfs));
>>> +
>>> +	for (i = 0; i < ARRAY_SIZE(debugfs); i++)
>>> +		debugfs_create_file(dsi->debugfs_vpg[i].name, 0644,
>>> +				    dsi->debugfs, &dsi->debugfs_vpg[i],
>>> +				    &fops_x32);
>>> +}
>>> +
>>>    static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>>>    {
>>>    	dsi->debugfs = debugfs_create_dir(dev_name(dsi->dev), NULL);
>>> @@ -969,14 +1052,13 @@ static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>>>    		return;
>>>    	}
>>>    
>>> -	debugfs_create_bool("vpg", 0660, dsi->debugfs, &dsi->vpg);
>>> -	debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs,
>>> -			    &dsi->vpg_horizontal);
>>> +	debugfs_create_files(dsi);

Hi Angelo,
And thank you for your patch.
Could you please explain why you have "so many lines" for adding the ber 
pattern, instead of these 4 lines :

+#define VID_MODE_VPG_MODE		BIT(20)
+bool vpg_ber_pattern;
+val |= dsi->vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
+debugfs_create_bool("vpg_ber_pattern", 0660, dsi->debugfs, 
&dsi->vpg_ber_pattern);

Many thanks
Philippe :-)

>>>    }
>>>    
>>>    static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
>>>    {
>>>    	debugfs_remove_recursive(dsi->debugfs);
>>> +	kfree(dsi->debugfs_vpg);
>>>    }
>>>    
>>>    #else
>>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!PaD758-TpCHJcJG4biB5oM3WJXd1mTbLitD8K1qzSVQ4Z06nc__06MR_sz-ITMIl$
> 
> 


More information about the dri-devel mailing list