[v5] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings

Rob Herring robh at kernel.org
Mon Jul 13 14:46:40 UTC 2020


On Fri, 10 Jul 2020 19:27:49 +0530, Krishna Manikandan wrote:
> MSM Mobile Display Subsytem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema
> for the device tree bindings for the same.
> 
> Signed-off-by: Krishna Manikandan <mkrishn at codeaurora.org>
> 
> Changes in v2:
> 	- Changed dpu to DPU (Sam Ravnborg)
> 	- Fixed indentation issues (Sam Ravnborg)
> 	- Added empty line between different properties (Sam Ravnborg)
> 	- Replaced reference txt files with  their corresponding
> 	  yaml files (Sam Ravnborg)
> 	- Modified the file to use "|" only when it is
> 	  necessary (Sam Ravnborg)
> 
> Changes in v3:
> 	- Corrected the license used (Rob Herring)
> 	- Added maxItems for properties (Rob Herring)
> 	- Dropped generic descriptions (Rob Herring)
> 	- Added ranges property (Rob Herring)
> 	- Corrected the indendation (Rob Herring)
> 	- Added additionalProperties (Rob Herring)
> 	- Split dsi file into two, one for dsi controller
> 	  and another one for dsi phy per target (Rob Herring)
> 	- Corrected description for pinctrl-names (Rob Herring)
> 	- Corrected the examples used in yaml file (Rob Herring)
> 	- Delete dsi.txt and dpu.txt (Rob Herring)
> 
> Changes in v4:
> 	- Move schema up by one level (Rob Herring)
> 	- Add patternProperties for mdp node (Rob Herring)
> 	- Corrected description of some properties (Rob Herring)
> 
> Changes in v5:
> 	- Correct the indentation (Rob Herring)
> 	- Remove unnecessary description from properties (Rob Herring)
> 	- Correct the number of interconnect entries (Rob Herring)
> 	- Add interconnect names for sc7180 (Rob Herring)
> 	- Add description for ports (Rob Herring)
> 	- Remove common properties (Rob Herring)
> 	- Add unevalutatedProperties (Rob Herring)
> 	- Reference existing dsi controller yaml in the common
> 	  dsi controller file (Rob Herring)
> 	- Correct the description of clock names to include only the
> 	  clocks that are required (Rob Herring)
> 	- Remove properties which are already covered under the common
> 	  binding (Rob Herring)
> 	- Add dsi phy supply nodes which are required for sc7180 and
> 	  sdm845 targets (Rob Herring)
> 	- Add type ref for syscon-sfpb (Rob Herring)
> ---
>  .../bindings/display/dsi-controller.yaml           |   4 +-
>  .../bindings/display/msm/dpu-sc7180.yaml           | 230 +++++++++++++++++++
>  .../bindings/display/msm/dpu-sdm845.yaml           | 210 ++++++++++++++++++
>  .../devicetree/bindings/display/msm/dpu.txt        | 141 ------------
>  .../display/msm/dsi-common-controller.yaml         | 178 +++++++++++++++
>  .../display/msm/dsi-controller-sc7180.yaml         | 115 ++++++++++
>  .../display/msm/dsi-controller-sdm845.yaml         | 115 ++++++++++
>  .../bindings/display/msm/dsi-phy-sc7180.yaml       |  79 +++++++
>  .../bindings/display/msm/dsi-phy-sdm845.yaml       |  81 +++++++
>  .../devicetree/bindings/display/msm/dsi-phy.yaml   |  79 +++++++
>  .../devicetree/bindings/display/msm/dsi.txt        | 246 ---------------------
>  11 files changed, 1089 insertions(+), 389 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu.txt
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-common-controller.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-controller-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-controller-sdm845.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-sdm845.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/display/msm/dsi.txt
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-controller-sc7180.example.dt.yaml: example-0: dsi at ae94000:reg:0: [0, 183058432, 0, 1024] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dpu-sdm845.example.dt.yaml: example-0: mdss at ae00000:reg:0: [0, 182452224, 0, 4096] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sc7180.example.dt.yaml: example-0: dsi-phy at ae94400:reg:0: [0, 183059456, 0, 512] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sc7180.example.dt.yaml: example-0: dsi-phy at ae94400:reg:1: [0, 183059968, 0, 640] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sc7180.example.dt.yaml: example-0: dsi-phy at ae94400:reg:2: [0, 183060992, 0, 480] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dpu-sc7180.example.dt.yaml: example-0: mdss at ae00000:reg:0: [0, 182452224, 0, 4096] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sdm845.example.dt.yaml: example-0: dsi-phy at ae94400:reg:0: [0, 183059456, 0, 512] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sdm845.example.dt.yaml: example-0: dsi-phy at ae94400:reg:1: [0, 183059968, 0, 640] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-phy-sdm845.example.dt.yaml: example-0: dsi-phy at ae94400:reg:2: [0, 183060992, 0, 480] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/msm/dsi-controller-sdm845.example.dt.yaml: example-0: dsi at ae94000:reg:0: [0, 183058432, 0, 1024] is too long


See https://patchwork.ozlabs.org/patch/1326868

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.



More information about the dri-devel mailing list