[PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings
Vinay Simha BN
simhavcs at gmail.com
Fri Jul 10 13:41:27 UTC 2020
- license modified to (GPL-2.0-only OR BSD-2-Clause)
- single-link and dual-link lvds description and
examples are added
- proper indentation
- VESA/JEIDA formats picked from panel-lvds dts
- dsi data-lanes property removed, it will be picked
from dsi0 ports
- dual-link lvds port added and implemented
- converted from .txt to .yaml
Signed-off-by: Vinay Simha BN <simhavcs at gmail.com>
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
Reviewed-by: Rob Herring <robh at kernel.org>
---
v1:
Initial version wast .txt file
v2:
From txt to yaml file format
v3:
* Andrzej Hajda review comments incorporated
dual port lvds implemented
* Laurent Pinchart review comments incorporated
dsi lanes property removed and it is dynamically
picked from the dsi ports
VESA/JEIDA format picked from panel-lvds dts
v4:
* Sam Ravnborg review comments incorporated
}' is indented properly in examples data-lanes
description for single-link and dual-link lvds
v5:
* Sam Ravnborg review comments incorporated
license modified to (GPL-2.0-only OR BSD-2-Clause)
changelog added
v6:
* No changes, revision version mentioned to inline with
driver file
v7:
* change log added
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
v8:
* Reviewed-by: Rob Herring <robh at kernel.org>
* change log modified in reverse chronological order
---
.../bindings/display/bridge/toshiba,tc358775.yaml | 215 +++++++++++++++++++++
1 file changed, 215 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 0000000..31f085d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+
+maintainers:
+ - Vinay Simha BN <simhavcs at gmail.com>
+
+description: |
+ This binding supports DSI to LVDS bridge TC358775
+
+ MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+ Video frame size:
+ Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+ limited by 135 MHz LVDS speed
+ Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+ panel, limited by 270 MHz LVDS speed.
+
+properties:
+ compatible:
+ const: toshiba,tc358775
+
+ reg:
+ maxItems: 1
+ description: i2c address of the bridge, 0x0f
+
+ vdd-supply:
+ maxItems: 1
+ description: 1.2V LVDS Power Supply
+
+ vddio-supply:
+ maxItems: 1
+ description: 1.8V IO Power Supply
+
+ stby-gpios:
+ maxItems: 1
+ description: Standby pin, Low active
+
+ reset-gpios:
+ maxItems: 1
+ description: Hardware reset, Low active
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port at 0:
+ type: object
+ description: |
+ DSI Input. The remote endpoint phandle should be a
+ reference to a valid mipi_dsi_host device node.
+
+ port at 1:
+ type: object
+ description: |
+ Video port for LVDS output (panel or connector).
+
+ port at 2:
+ type: object
+ description: |
+ Video port for Dual link LVDS output (panel or connector).
+
+ required:
+ - port at 0
+ - port at 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - stby-gpios
+ - reset-gpios
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /* For single-link LVDS display panel */
+
+ i2c at 78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge: bridge at f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ d2l_in_test: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ lvds_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi at 1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&d2l_in_test>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
+ - |
+ /* For dual-link LVDS display panel */
+
+ i2c at 78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge_dual: bridge at f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ d2l_in_dual: endpoint {
+ remote-endpoint = <&dsi0_out_dual>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi at 1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 1 {
+ reg = <1>;
+ dsi0_out_dual: endpoint {
+ remote-endpoint = <&d2l_in_dual>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+...
--
2.1.2
More information about the dri-devel
mailing list