[PATCH 7/8] drm/mgag200: Move G200SE's unique id into model-specific data

Thomas Zimmermann tzimmermann at suse.de
Wed Jul 15 14:59:01 UTC 2020


The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
 drivers/gpu/drm/mgag200/mgag200_drv.c  | 19 +++++++++++++------
 drivers/gpu/drm/mgag200/mgag200_drv.h  |  8 ++++++--
 drivers/gpu/drm/mgag200/mgag200_mode.c | 18 +++++++++++-------
 3 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
index ac9ac5b6d587..f7652e16365c 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.c
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
@@ -115,6 +115,17 @@ static int mgag200_regs_init(struct mga_device *mdev)
 	return 0;
 }
 
+static void mgag200_g200se_init_unique_id(struct mga_device *mdev)
+{
+	struct drm_device *dev = &mdev->base;
+
+	/* stash G200 SE model number for later use */
+	mdev->model.g200se.unique_rev_id = RREG32(0x1e24);
+
+	drm_dbg(dev, "G200 SE unique revision id is 0x%x\n",
+		mdev->model.g200se.unique_rev_id);
+}
+
 static int mgag200_device_init(struct mga_device *mdev, unsigned long flags)
 {
 	struct drm_device *dev = &mdev->base;
@@ -127,12 +138,8 @@ static int mgag200_device_init(struct mga_device *mdev, unsigned long flags)
 	if (ret)
 		return ret;
 
-	/* stash G200 SE model number for later use */
-	if (IS_G200_SE(mdev)) {
-		mdev->unique_rev_id = RREG32(0x1e24);
-		drm_dbg(dev, "G200 SE unique revision id is 0x%x\n",
-			mdev->unique_rev_id);
-	}
+	if (IS_G200_SE(mdev))
+		mgag200_g200se_init_unique_id(mdev);
 
 	ret = mgag200_mm_init(mdev);
 	if (ret)
diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index 819c03cc626b..048efe635aff 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -166,8 +166,12 @@ struct mga_device {
 
 	int fb_mtrr;
 
-	/* SE model number stored in reg 0x1e24 */
-	u32 unique_rev_id;
+	union {
+		struct {
+			/* SE model number stored in reg 0x1e24 */
+			u32 unique_rev_id;
+		} g200se;
+	} model;
 
 	struct mga_connector connector;
 	struct drm_simple_display_pipe display_pipe;
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 4fa64cf884cb..752409c7f326 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -112,6 +112,7 @@ static inline void mga_wait_busy(struct mga_device *mdev)
 
 static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
 {
+	u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
 	unsigned int vcomax, vcomin, pllreffreq;
 	unsigned int delta, tmpdelta, permitteddelta;
 	unsigned int testp, testm, testn;
@@ -121,7 +122,7 @@ static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
 	unsigned int fvv;
 	unsigned int i;
 
-	if (mdev->unique_rev_id <= 0x03) {
+	if (unique_rev_id <= 0x03) {
 
 		m = n = p = 0;
 		vcomax = 320000;
@@ -219,7 +220,7 @@ static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
 	WREG_DAC(MGA1064_PIX_PLLC_N, n);
 	WREG_DAC(MGA1064_PIX_PLLC_P, p);
 
-	if (mdev->unique_rev_id >= 0x04) {
+	if (unique_rev_id >= 0x04) {
 		WREG_DAC(0x1a, 0x09);
 		msleep(20);
 		WREG_DAC(0x1a, 0x01);
@@ -1183,12 +1184,13 @@ static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
 					const struct drm_display_mode *mode,
 					const struct drm_framebuffer *fb)
 {
+	u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
 	unsigned int hiprilvl;
 	u8 crtcext6;
 
-	if  (mdev->unique_rev_id >= 0x04) {
+	if  (unique_rev_id >= 0x04) {
 		hiprilvl = 0;
-	} else if (mdev->unique_rev_id >= 0x02) {
+	} else if (unique_rev_id >= 0x02) {
 		unsigned int bpp;
 		unsigned long mb;
 
@@ -1213,7 +1215,7 @@ static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
 		else
 			hiprilvl = 5;
 
-	} else if (mdev->unique_rev_id >= 0x01) {
+	} else if (unique_rev_id >= 0x01) {
 		hiprilvl = 3;
 	} else {
 		hiprilvl = 4;
@@ -1337,7 +1339,9 @@ static enum drm_mode_status mga_vga_mode_valid(struct drm_connector *connector,
 	int bpp = 32;
 
 	if (IS_G200_SE(mdev)) {
-		if (mdev->unique_rev_id == 0x01) {
+		u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
+
+		if (unique_rev_id == 0x01) {
 			if (mode->hdisplay > 1600)
 				return MODE_VIRTUAL_X;
 			if (mode->vdisplay > 1200)
@@ -1345,7 +1349,7 @@ static enum drm_mode_status mga_vga_mode_valid(struct drm_connector *connector,
 			if (mga_vga_calculate_mode_bandwidth(mode, bpp)
 				> (24400 * 1024))
 				return MODE_BANDWIDTH;
-		} else if (mdev->unique_rev_id == 0x02) {
+		} else if (unique_rev_id == 0x02) {
 			if (mode->hdisplay > 1920)
 				return MODE_VIRTUAL_X;
 			if (mode->vdisplay > 1200)
-- 
2.27.0



More information about the dri-devel mailing list