[PATCH v3 06/21] drm/bridge: tc358767: add drm_panel_bridge support
Sam Ravnborg
sam at ravnborg.org
Sun Jul 19 13:06:56 UTC 2020
Hi Laurent.
On Sat, Jul 11, 2020 at 01:19:35AM +0300, Laurent Pinchart wrote:
> Hi Sam,
>
> Thank you for the patch.
>
> On Fri, Jul 03, 2020 at 09:24:02PM +0200, Sam Ravnborg wrote:
> > Prepare the bridge driver for use in a chained setup by
> > replacing direct use of drm_panel with drm_panel_bridge support.
> >
> > The bridge driver assume the panel is optional.
> > The relevant tests are migrated over to check for the
> > pnale bridge to keep the same functionality.
>
> s/pnale/panel/
>
> > Note: the bridge panel will use the connector type from the panel.
> >
> > Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> > Cc: Andrzej Hajda <a.hajda at samsung.com>
> > Cc: Neil Armstrong <narmstrong at baylibre.com>
> > Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> > Cc: Jonas Karlman <jonas at kwiboo.se>
> > Cc: Jernej Skrabec <jernej.skrabec at siol.net>
> > ---
> > drivers/gpu/drm/bridge/tc358767.c | 57 +++++++++++++++----------------
> > 1 file changed, 27 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> > index c2777b226c75..08d483664258 100644
> > --- a/drivers/gpu/drm/bridge/tc358767.c
> > +++ b/drivers/gpu/drm/bridge/tc358767.c
> > @@ -244,8 +244,8 @@ struct tc_data {
> > struct drm_dp_aux aux;
> >
> > struct drm_bridge bridge;
> > + struct drm_bridge *panel_bridge;
> > struct drm_connector connector;
> > - struct drm_panel *panel;
> >
> > /* link settings */
> > struct tc_edp_link link;
> > @@ -1236,13 +1236,6 @@ static int tc_stream_disable(struct tc_data *tc)
> > return 0;
> > }
> >
> > -static void tc_bridge_pre_enable(struct drm_bridge *bridge)
> > -{
> > - struct tc_data *tc = bridge_to_tc(bridge);
> > -
> > - drm_panel_prepare(tc->panel);
> > -}
> > -
> > static void tc_bridge_enable(struct drm_bridge *bridge)
> > {
> > struct tc_data *tc = bridge_to_tc(bridge);
> > @@ -1266,8 +1259,6 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
> > tc_main_link_disable(tc);
> > return;
> > }
> > -
> > - drm_panel_enable(tc->panel);
> > }
> >
> > static void tc_bridge_disable(struct drm_bridge *bridge)
> > @@ -1275,8 +1266,6 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
> > struct tc_data *tc = bridge_to_tc(bridge);
> > int ret;
> >
> > - drm_panel_disable(tc->panel);
> > -
> > ret = tc_stream_disable(tc);
> > if (ret < 0)
> > dev_err(tc->dev, "main link stream stop error: %d\n", ret);
> > @@ -1286,13 +1275,6 @@ static void tc_bridge_disable(struct drm_bridge *bridge)
> > dev_err(tc->dev, "main link disable error: %d\n", ret);
> > }
> >
> > -static void tc_bridge_post_disable(struct drm_bridge *bridge)
> > -{
> > - struct tc_data *tc = bridge_to_tc(bridge);
> > -
> > - drm_panel_unprepare(tc->panel);
> > -}
> > -
> > static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
> > const struct drm_display_mode *mode,
> > struct drm_display_mode *adj)
> > @@ -1348,9 +1330,11 @@ static int tc_connector_get_modes(struct drm_connector *connector)
> > return 0;
> > }
> >
> > - count = drm_panel_get_modes(tc->panel, connector);
> > - if (count > 0)
> > - return count;
> > + if (tc->panel_bridge) {
> > + count = drm_bridge_get_modes(tc->panel_bridge, connector);
> > + if (count > 0)
> > + return count;
> > + }
> >
> > edid = drm_get_edid(connector, &tc->aux.ddc);
> >
> > @@ -1378,7 +1362,7 @@ static enum drm_connector_status tc_connector_detect(struct drm_connector *conne
> > int ret;
> >
> > if (tc->hpd_pin < 0) {
> > - if (tc->panel)
> > + if (tc->panel_bridge)
> > return connector_status_connected;
> > else
> > return connector_status_unknown;
> > @@ -1413,6 +1397,13 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
> > struct drm_device *drm = bridge->dev;
> > int ret;
> >
> > + if (tc->panel_bridge) {
> > + ret = drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
> > + &tc->bridge, flags);
> > + if (ret < 0)
> > + return ret;
> > + }
>
> With this both this driver and the panel bridge driver will create a
> connector. The simplest way to handle that is probably to pass
> flags & ~DRM_BRIDGE_ATTACH_NO_CONNECTOR to drm_bridge_attach(). It's a
> bit of a hack, but should go away once all users are converted to
> !DRM_BRIDGE_ATTACH_NO_CONNECTOR.
I do not follow you here - sorry.
We have two situations:
display driver creates the connector - and passes DRM_BRIDGE_ATTACH_NO_CONNECTOR.
- bridge driver shall not create connector
- bridge panel shall not create connector
display driver expect bridge to create connector and passes 0
- bridge driver shall not create connector
- bridge panel shall create connector
So the correct logic seems to be:
- if there is a bridge panel do not create a connector in the bridge
- otherwise just follow the flags
I will try to implement this.
Sam
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
> > +
> > if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
> > DRM_ERROR("Fix bridge driver to make connector optional!");
> > return -EINVAL;
> > @@ -1421,7 +1412,7 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
> > /* Create DP/eDP connector */
> > drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
> > ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
> > - tc->panel ? DRM_MODE_CONNECTOR_eDP :
> > + tc->panel_bridge ? DRM_MODE_CONNECTOR_eDP :
> > DRM_MODE_CONNECTOR_DisplayPort);
> > if (ret)
> > return ret;
> > @@ -1435,9 +1426,6 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
> > DRM_CONNECTOR_POLL_DISCONNECT;
> > }
> >
> > - if (tc->panel)
> > - drm_panel_attach(tc->panel, &tc->connector);
> > -
> > drm_display_info_set_bus_formats(&tc->connector.display_info,
> > &bus_format, 1);
> > tc->connector.display_info.bus_flags =
> > @@ -1453,10 +1441,8 @@ static const struct drm_bridge_funcs tc_bridge_funcs = {
> > .attach = tc_bridge_attach,
> > .mode_valid = tc_mode_valid,
> > .mode_set = tc_bridge_mode_set,
> > - .pre_enable = tc_bridge_pre_enable,
> > .enable = tc_bridge_enable,
> > .disable = tc_bridge_disable,
> > - .post_disable = tc_bridge_post_disable,
> > .mode_fixup = tc_bridge_mode_fixup,
> > };
> >
> > @@ -1547,6 +1533,7 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
> > static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
> > {
> > struct device *dev = &client->dev;
> > + struct drm_panel *panel;
> > struct tc_data *tc;
> > int ret;
> >
> > @@ -1557,10 +1544,20 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
> > tc->dev = dev;
> >
> > /* port at 2 is the output port */
> > - ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &tc->panel, NULL);
> > + ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
> > if (ret && ret != -ENODEV)
> > return ret;
> >
> > + if (panel) {
> > + struct drm_bridge *pbridge;
> > +
> > + pbridge = devm_drm_panel_bridge_add(dev, panel);
> > + if (IS_ERR(pbridge))
> > + return PTR_ERR(pbridge);
> > +
> > + tc->panel_bridge = pbridge;
> > + }
> > +
> > /* Shut down GPIO is optional */
> > tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
> > if (IS_ERR(tc->sd_gpio))
>
> --
> Regards,
>
> Laurent Pinchart
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list