[PATCH v8 00/12] PCI: brcmstb: enable PCIe for STB chips
Florian Fainelli
f.fainelli at gmail.com
Mon Jul 20 23:27:53 UTC 2020
On 7/15/20 7:35 AM, Jim Quinlan wrote:
> Patchset Summary:
> Enhance a PCIe host controller driver. Because of its unusual design
> we are foced to change dev->dma_pfn_offset into a more general role
> allowing multiple offsets. See the 'v1' notes below for more info.
Christoph, Robin, are you happy with this version?
>
> v8:
> Commit: "device core: Introduce DMA range map, supplanting ..."
> -- To satisfy a specific m68 compile configuration, I moved the 'struct
> bus_dma_region; definition out of #ifdef CONFIG_HAS_DMA and also defined
> three inline functions for !CONFIG_HAS_DMA (kernel test robot).
> -- The sunXi drivers -- suc4i_csi, sun6i_csi, cedrus_hw -- set
> a pfn_offset outside of_dma_configure() but the code offers no
> insight on the size of the translation window. V7 had me using
> SIZE_MAX as the size. I have since contacted the sunXi maintainer and
> he said that using a size of SZ_4G would cover sunXi configurations.
>
> v7:
> Commit: "device core: Introduce DMA range map, supplanting ..."
> -- remove second kcalloc/copy in device.c (AndyS)
> -- use PTR_ERR_OR_ZERO() and PHYS_PFN() (AndyS)
> -- indentation, sizeof(struct ...) => sizeof(*r) (AndyS)
> -- add pfn.h definitions: PFN_DMA_ADDR(), DMA_ADDR_PFN() (AndyS)
> -- Fixed compile error in "sun6i_csi.c" (kernel test robot)
> Commit "ata: ahci_brcm: Fix use of BCM7216 reset controller"
> -- correct name of function in the commit msg (SergeiS)
>
> v6:
> Commit "device core: Introduce DMA range map":
> -- of_dma_get_range() now takes a single argument and returns either
> NULL, a valid map, or an ERR_PTR. (Robin)
> -- offsets are no longer a PFN value but an actual address. (Robin)
> -- the bus_dma_region struct stores the range size instead of
> the cpu_end and pci_end values. (Robin)
> -- devices that were setting a single offset with no boundaries
> have been modified to have boundaries; in a few places
> where this informatino was unavilable a /* FIXME: ... */
> comment was added. (Robin)
> -- dma_attach_offset_range() can be called when an offset
> map already exists; if it's range is already present
> nothing is done and success is returned. (Robin)
> All commits:
> -- Man name/style/corrections/etc changed (Bjorn)
> -- rebase to Torvalds master
>
> v5:
> Commit "device core: Introduce multiple dma pfn offsets"
> -- in of/address.c: "map_size = 0" => "*map_size = 0"
> -- use kcalloc instead of kzalloc (AndyS)
> -- use PHYS_ADDR_MAX instead of "~(phys_addr_t)0"
> Commit "PCI: brcmstb: Set internal memory viewport sizes"
> -- now gives error on missing dma-ranges property.
> Commit "dt-bindings: PCI: Add bindings for more Brcmstb chips"
> -- removed "Allof:" from brcm,scb-sizes definition (RobH)
> All Commits:
> -- indentation style, use max chars 100 (AndyS)
> -- rebased to torvalds master
>
> v4:
> Commit "device core: Introduce multiple dma pfn offsets"
> -- of_dma_get_range() does not take a dev param but instead
> takes two "out" params: map and map_size. We do this so
> that the code that parses dma-ranges is separate from
> the code that modifies 'dev'. (Nicolas)
> -- the separate case of having a single pfn offset has
> been removed and is now processed by going through the
> map array. (Nicolas)
> -- move attach_uniform_dma_pfn_offset() from of/address.c to
> dma/mapping.c so that it does not depend on CONFIG_OF. (Nicolas)
> -- devm_kcalloc => devm_kzalloc (DanC)
> -- add/fix assignment to dev->dma_pfn_offset_map for func
> attach_uniform_dma_pfn_offset() (DanC, Nicolas)
> -- s/struct dma_pfn_offset_region/struct bus_dma_region/ (Nicolas)
> -- s/attach_uniform_dma_pfn_offset/dma_attach_uniform_pfn_offset/
> -- s/attach_dma_pfn_offset_map/dma_attach_pfn_offset_map/
> -- More use of PFN_{PHYS,DOWN,UP}. (AndyS)
> Commit "of: Include a dev param in of_dma_get_range()"
> -- this commit was sqaushed with "device core: Introduce ..."
>
> v3:
> Commit "device core: Introduce multiple dma pfn offsets"
> Commit "arm: dma-mapping: Invoke dma offset func if needed"
> -- The above two commits have been squashed. More importantly,
> the code has been modified so that the functionality for
> multiple pfn offsets subsumes the use of dev->dma_pfn_offset.
> In fact, dma_pfn_offset is removed and supplanted by
> dma_pfn_offset_map, which is a pointer to an array. The
> more common case of a uniform offset is now handled as
> a map with a single entry, while cases requiring multiple
> pfn offsets use a map with multiple entries. Code paths
> that used to do this:
>
> dev->dma_pfn_offset = mydrivers_pfn_offset;
>
> have been changed to do this:
>
> attach_uniform_dma_pfn_offset(dev, pfn_offset);
>
> Commit "dt-bindings: PCI: Add bindings for more Brcmstb chips"
> -- Add if/then clause for required props: resets, reset-names (RobH)
> -- Change compatible list from const to enum (RobH)
> -- Change list of u32-tuples to u64 (RobH)
>
> Commit "of: Include a dev param in of_dma_get_range()"
> -- modify of/unittests.c to add NULL param in of_dma_get_range() call.
>
> Commit "device core: Add ability to handle multiple dma offsets"
> -- align comment in device.h (AndyS).
> -- s/cpu_beg/cpu_start/ and s/dma_beg/dma_start/ in struct
> dma_pfn_offset_region (AndyS).
>
> v2:
> Commit: "device core: Add ability to handle multiple dma offsets"
> o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
> o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
> o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
> o dev->dma_pfn_map => dev->dma_pfn_offset_map
> o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
> o In device.h: s/const void */const struct dma_pfn_offset_region */
> o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since
> guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
> o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now
> dev->dma_pfn_offset_map is copied as well.
> o Merged two of the DMA commits into one (Christoph).
>
> Commit "arm: dma-mapping: Invoke dma offset func if needed":
> o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET
>
> Other commits' changes:
> o Removed need for carrying of_id var in priv (Nicolas)
> o Commit message rewordings (Bjorn)
> o Commit log messages filled to 75 chars (Bjorn)
> o devm_reset_control_get_shared())
> => devm_reset_control_get_optional_shared (Philipp)
> o Add call to reset_control_assert() in PCIe remove routines (Philipp)
>
> v1:
> This patchset expands the usefulness of the Broadcom Settop Box PCIe
> controller by building upon the PCIe driver used currently by the
> Raspbery Pi. Other forms of this patchset were submitted by me years
> ago and not accepted; the major sticking point was the code required
> for the DMA remapping needed for the PCIe driver to work [1].
>
> There have been many changes to the DMA and OF subsystems since that
> time, making a cleaner and less intrusive patchset possible. This
> patchset implements a generalization of "dev->dma_pfn_offset", except
> that instead of a single scalar offset it provides for multiple
> offsets via a function which depends upon the "dma-ranges" property of
> the PCIe host controller. This is required for proper functionality
> of the BrcmSTB PCIe controller and possibly some other devices.
>
> [1] https://lore.kernel.org/linux-arm-kernel/1516058925-46522-5-git-send-email-jim2101024@gmail.com/
>
> Jim Quinlan (12):
> PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
> ata: ahci_brcm: Fix use of BCM7216 reset controller
> dt-bindings: PCI: Add bindings for more Brcmstb chips
> PCI: brcmstb: Add bcm7278 register info
> PCI: brcmstb: Add suspend and resume pm_ops
> PCI: brcmstb: Add bcm7278 PERST# support
> PCI: brcmstb: Add control of rescal reset
> device core: Introduce DMA range map, supplanting dma_pfn_offset
> PCI: brcmstb: Set additional internal memory DMA viewport sizes
> PCI: brcmstb: Accommodate MSI for older chips
> PCI: brcmstb: Set bus max burst size by chip type
> PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list
>
> .../bindings/pci/brcm,stb-pcie.yaml | 56 ++-
> arch/arm/include/asm/dma-mapping.h | 9 +-
> arch/arm/mach-keystone/keystone.c | 17 +-
> arch/sh/drivers/pci/pcie-sh7786.c | 9 +-
> arch/sh/kernel/dma-coherent.c | 16 +-
> arch/x86/pci/sta2x11-fixup.c | 7 +-
> drivers/acpi/arm64/iort.c | 5 +-
> drivers/ata/ahci_brcm.c | 11 +-
> drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +-
> drivers/iommu/io-pgtable-arm.c | 2 +-
> .../platform/sunxi/sun4i-csi/sun4i_csi.c | 5 +-
> .../platform/sunxi/sun6i-csi/sun6i_csi.c | 4 +-
> drivers/of/address.c | 95 ++--
> drivers/of/device.c | 47 +-
> drivers/of/of_private.h | 9 +-
> drivers/of/unittest.c | 35 +-
> drivers/pci/controller/Kconfig | 3 +-
> drivers/pci/controller/pcie-brcmstb.c | 408 +++++++++++++++---
> drivers/remoteproc/remoteproc_core.c | 2 +-
> .../staging/media/sunxi/cedrus/cedrus_hw.c | 7 +-
> drivers/usb/core/message.c | 4 +-
> drivers/usb/core/usb.c | 2 +-
> include/linux/device.h | 4 +-
> include/linux/dma-direct.h | 10 +-
> include/linux/dma-mapping.h | 43 ++
> include/linux/pfn.h | 2 +
> kernel/dma/coherent.c | 10 +-
> kernel/dma/mapping.c | 53 +++
> 28 files changed, 683 insertions(+), 197 deletions(-)
>
--
Florian
More information about the dri-devel
mailing list