[PATCH 2/2] drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge

[Marek Vasut]

On 7/26/20 9:15 AM, Sam Ravnborg wrote:
> Hi Marek.

Hi,

> On Sat, Jul 25, 2020 at 11:14:57PM +0200, Marek Vasut wrote:
>> Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
>> from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
>> meant to replace the panel-raspberrypi-touchscreen too, as the bridge
>> connection can be described in DT too.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> To: dri-devel at lists.freedesktop.org
>> Cc: Eric Anholt <eric at anholt.net>
>> Cc: Rob Herring <robh+dt at kernel.org>
>> Cc: Sam Ravnborg <sam at ravnborg.org>
>> Cc: devicetree at vger.kernel.org
>> ---
> 
> Two general comments.
> - This driver should use the bridge panel - this will simplify the
>   driver in many places. We already have several good examples in-tree
>   that does this.

Can you list such an example ?

> - The driver does not respect the "flags" argument in the attach
>   operation. All new bridge drivers shall respect the flags operation to
>   prepare for use in a setup with chained bridges.
>   In short the flags is used to determine if the display driver or the
>   bridge creates the connector.
>   When the bridge panel is introduced you can drop all the connector
>   creation code and just pass the flag to the bridge panel.
>   The bridge panel will then create the connector if requested.
>   This is possible because this simple bridge driver does not add
>   anything to the connector that the bridge panel does not know.

OK