[PATCH] video: fbdev: added driver for sharp memory lcd displays
Daniel Vetter
daniel at ffwll.ch
Mon Jul 27 09:22:29 UTC 2020
On Sun, Jul 26, 2020 at 7:22 PM Sam Ravnborg <sam at ravnborg.org> wrote:
>
> Hi Rodrigo.
>
> On Fri, Jul 24, 2020 at 05:34:04PM -0300, Rodrigo Alencar wrote:
> > The supported displays are ls027b7dh01 (tested), ls044q7dh01,
> > ls013b7dh05, ls013b7dh03
> >
> > Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar at gmail.com>
>
> Thanks for submitting this driver.
> Unfortunately I have some bad news for you...
>
> The binding needs to be submitted as a seperate patch, and all new
> bindings must use the DT schema format (.yaml files).
> See Documentation/devicetree/bindings/*.rst for more info.
>
> And on top of this fbdev/ is in maintenance mode so no new drivers.
> New display drivers and panel drivers must go to gpu/drm/
> and use the frameworks available there.
>
> It looks like what we have here is a panel driver.
> Look for other similar sharp panels in drm/panel/ to get an idea how to
> add support for these new panels.
Since it's directly used, probably drm/tiny since we haven't yet
unified panel (used by other drm_device drivers) and tiny (stand-alone
drivers for simple panels).
-Daniel
>
> Soory, but looks forward for an updated patch.
>
> Sam
>
>
> > ---
> > .../devicetree/bindings/display/smemlcdfb.txt | 46 ++
> > drivers/video/fbdev/Kconfig | 14 +
> > drivers/video/fbdev/Makefile | 1 +
> > drivers/video/fbdev/smemlcdfb.c | 485 ++++++++++++++++++
> > 4 files changed, 546 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/smemlcdfb.txt
> > create mode 100644 drivers/video/fbdev/smemlcdfb.c
> >
> > diff --git a/Documentation/devicetree/bindings/display/smemlcdfb.txt b/Documentation/devicetree/bindings/display/smemlcdfb.txt
> > new file mode 100644
> > index 000000000000..e33025dd3374
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/smemlcdfb.txt
> > @@ -0,0 +1,46 @@
> > +Sharp Memory LCD Linux Framebuffer Driver
> > +
> > +Required properties:
> > + - compatible: It should be "sharp,<model-no>". The supported displays are
> > + ls027b7dh01, ls044q7dh01, ls013b7dh05, ls013b7dh03. Maybe other
> > + monochromatic models can be supported with the current code.
> > + - reg: SPI chip select number for the device.
> > + - spi-max-frequency: Max SPI frequency to use. One must verify the datasheet.
> > + - spi-cs-high: Sharp Memory LCD needs chipselect high.
> > +
> > +Optional properties:
> > + - sharp,frames-per-sec: It should contain the desired frames per second.
> > + It does not represent the actual frame rate. Default: 10
> > + - sharp,extmode-high: External COM Input signal is expected in EXTCOMIN port.
> > + This is recommended to reduce CPU and SPI Load.
> > + - pwm: If property "sharp,extmode-high" is specified, this is recommended.
> > + It should contain the pwm to use, according to
> > + Documentation/devicetree/bindings/pwm/pwm.txt
> > + Verify the display datasheet for the EXTCOMIN signal period
> > + - disp-gpios: The GPIO used to enable the display, if available. See
> > + Documentation/devicetree/bindings/gpio/gpio.txt for details.
> > +
> > +Examples:
> > +
> > +ls027b7dh01: smemlcd at 0 {
> > + compatible = "sharp,ls027b7dh01";
> > + reg = <0>;
> > + spi-max-frequency = <1000000>;
> > + spi-cs-high;
> > + disp-gpios = <&gpio0 7>;
> > + disp-active-high;
> > + sharp,extmode-high;
> > + pwms = <&pwm 0 100000000>;
> > +};
> > +
> > +ls013b7dh05: smemlcd at 3 {
> > + compatible = "sharp,ls013b7dh05";
> > + reg = <3>;
> > + spi-max-frequency = <1000000>;
> > + spi-cs-high;
> > + disp-gpios = <&gpio0 13>;
> > + disp-active-high;
> > + sharp,extmode-high;
> > + pwms = <&pwm 0 50000000>;
> > + sharp,frames-per-sec = <20>;
> > +};
> > diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> > index b2c9dd4f0cb5..0fff47a59d8b 100644
> > --- a/drivers/video/fbdev/Kconfig
> > +++ b/drivers/video/fbdev/Kconfig
> > @@ -2221,6 +2221,20 @@ config FB_SSD1307
> > This driver implements support for the Solomon SSD1307
> > OLED controller over I2C.
> >
> > +config FB_SMEMLCD
> > + tristate "Sharp Memory LCD framebuffer support"
> > + depends on FB && SPI
> > + depends on OF
> > + depends on GPIOLIB || COMPILE_TEST
> > + select FB_SYS_FOPS
> > + select FB_SYS_FILLRECT
> > + select FB_SYS_COPYAREA
> > + select FB_SYS_IMAGEBLIT
> > + select FB_DEFERRED_IO
> > + select PWM
> > + help
> > + This driver implements support for the Sharp Memory LCD
> > +
> > config FB_SM712
> > tristate "Silicon Motion SM712 framebuffer support"
> > depends on FB && PCI
> > diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> > index cad4fb64442a..5c58dfd8ac08 100644
> > --- a/drivers/video/fbdev/Makefile
> > +++ b/drivers/video/fbdev/Makefile
> > @@ -128,6 +128,7 @@ obj-$(CONFIG_FB_OF) += offb.o
> > obj-$(CONFIG_FB_MX3) += mx3fb.o
> > obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
> > obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
> > +obj-$(CONFIG_FB_SMEMLCD) += smemlcdfb.o
> > obj-$(CONFIG_FB_SIMPLE) += simplefb.o
> >
> > # the test framebuffer is last
> > diff --git a/drivers/video/fbdev/smemlcdfb.c b/drivers/video/fbdev/smemlcdfb.c
> > new file mode 100644
> > index 000000000000..54a0c57b6713
> > --- /dev/null
> > +++ b/drivers/video/fbdev/smemlcdfb.c
> > @@ -0,0 +1,485 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Copyright (C) 2019 IMBEL http://www.imbel.gov.br
> > + * Rodrigo Alencar <alencar.fmce at imbel.gov.br>
> > + */
> > +
> > +#include <linux/fb.h>
> > +#include <linux/bitrev.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/spi/spi.h>
> > +#include <linux/module.h>
> > +#include <linux/property.h>
> > +#include <linux/pwm.h>
> > +
> > +#define SMEMLCD_DATA_UPDATE 0x80
> > +#define SMEMLCD_FRAME_INVERSION 0x40
> > +#define SMEMLCD_ALL_CLEAR 0x20
> > +#define SMEMLCD_DUMMY_DATA 0x00
> > +
> > +struct smemlcd_info {
> > + u32 width;
> > + u32 height;
> > +};
> > +
> > +struct smemlcd_par {
> > + struct spi_device *spi;
> > + struct fb_info *info;
> > + struct pwm_device *extcomin_pwm;
> > + struct gpio_desc *disp;
> > + struct delayed_work d_work;
> > + struct mutex update_lock;
> > +
> > + u8 *spi_buf;
> > +
> > + bool extmode;
> > + u32 spi_width;
> > + u32 vmem_width;
> > +
> > + u8 vcom;
> > + u32 start;
> > + u32 height;
> > +};
> > +
> > +static const struct fb_fix_screeninfo smemlcd_fix = {
> > + .id = "Sharp Memory LCD",
> > + .type = FB_TYPE_PACKED_PIXELS,
> > + .visual = FB_VISUAL_MONO10,
> > + .xpanstep = 0,
> > + .ypanstep = 0,
> > + .ywrapstep = 0,
> > + .accel = FB_ACCEL_NONE,
> > +};
> > +
> > +static const struct fb_var_screeninfo smemlcd_var = {
> > + .bits_per_pixel = 1,
> > + .red = { .length = 1 },
> > + .green = { .length = 1 },
> > + .blue = { .length = 1 },
> > +};
> > +
> > +static void smemlcd_update(struct smemlcd_par *par)
> > +{
> > + struct spi_device *spi = par->spi;
> > + u8 *vmem = par->info->screen_buffer;
> > + u8 *buf_ptr = par->spi_buf;
> > + int ret;
> > + u32 i,j;
> > +
> > + if (par->start + par->height > par->info->var.yres) {
> > + par->start = 0;
> > + par->height = 0;
> > + }
> > + /* go to start line */
> > + vmem += par->start * par->vmem_width;
> > + /* update vcom */
> > + par->vcom ^= SMEMLCD_FRAME_INVERSION;
> > + /* mode selection */
> > + *(buf_ptr++) = (par->height)? (SMEMLCD_DATA_UPDATE | par->vcom) : par->vcom;
> > +
> > + /* not all SPI masters have LSB-first mode, bitrev8 is used */
> > + for (i = par->start + 1; i < par->start + par->height + 1; i++) {
> > + /* gate line address */
> > + *(buf_ptr++) = bitrev8(i);
> > + /* data writing */
> > + for (j = 0; j < par->spi_width; j++)
> > + *(buf_ptr++) = bitrev8(*(vmem++));
> > + /* dummy data */
> > + *(buf_ptr++) = SMEMLCD_DUMMY_DATA;
> > + /* video memory alignment */
> > + for (; j < par->vmem_width; j++)
> > + vmem++;
> > + }
> > + /* dummy data */
> > + *(buf_ptr++) = SMEMLCD_DUMMY_DATA;
> > +
> > + ret = spi_write(spi, &(par->spi_buf[0]), par->height * (par->spi_width + 2) + 2);
> > + if (ret < 0)
> > + dev_err(&spi->dev, "Couldn't send SPI command.\n");
> > +
> > + par->start = U32_MAX;
> > + par->height = 0;
> > +}
> > +
> > +static void smemlcd_frame(struct smemlcd_par *par, u32 req_start, u32 req_height)
> > +{
> > + u32 end = par->start + par->height;
> > + u32 req_end = req_start + req_height;
> > + if (req_end > par->info->var.yres)
> > + req_end = par->info->var.yres;
> > + if (par->start > req_start)
> > + par->start = req_start;
> > + if (end < req_end || end > par->info->var.yres)
> > + end = req_end;
> > + par->height = end - par->start;
> > +}
> > +
> > +static void smemlcd_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
> > +{
> > + struct smemlcd_par *par = info->par;
> > + sys_fillrect(info, rect);
> > +
> > + mutex_lock(&par->update_lock);
> > + smemlcd_frame(par, rect->dy, rect->height);
> > + if(par->extmode)
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > +}
> > +
> > +static void smemlcd_imageblit(struct fb_info *info, const struct fb_image *image)
> > +{
> > + struct smemlcd_par *par = info->par;
> > + sys_imageblit(info, image);
> > +
> > + mutex_lock(&par->update_lock);
> > + smemlcd_frame(par, image->dy, image->height);
> > + if(par->extmode)
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > +}
> > +
> > +static void smemlcd_copyarea(struct fb_info *info, const struct fb_copyarea *area)
> > +{
> > + struct smemlcd_par *par = info->par;
> > + sys_copyarea(info, area);
> > +
> > + mutex_lock(&par->update_lock);
> > + smemlcd_frame(par, area->dy, area->height);
> > + if(par->extmode)
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > +}
> > +
> > +static ssize_t smemlcd_write(struct fb_info *info, const char __user * buf, size_t count, loff_t * ppos)
> > +{
> > + ssize_t ret;
> > + struct smemlcd_par *par = info->par;
> > + u32 req_start, req_height;
> > + u32 offset = (u32) * ppos;
> > +
> > + ret = fb_sys_write(info, buf, count, ppos);
> > + if (ret > 0) {
> > + mutex_lock(&par->update_lock);
> > + req_start = max((int)(offset / par->vmem_width), 0);
> > + req_height = ret / par->vmem_width + 1;
> > + smemlcd_frame(par, req_start, req_height);
> > + if(par->extmode)
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int smemlcd_blank(int blank_mode, struct fb_info *info)
> > +{
> > + struct smemlcd_par *par = info->par;
> > +
> > + if (par->disp) {
> > + if (blank_mode != FB_BLANK_UNBLANK)
> > + gpiod_set_value_cansleep(par->disp, 0);
> > + else
> > + gpiod_set_value_cansleep(par->disp, 1);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void smemlcd_deferred_io(struct fb_info *info, struct list_head *pagelist)
> > +{
> > + struct smemlcd_par *par = info->par;
> > +
> > + mutex_lock(&par->update_lock);
> > +
> > + if (!list_empty(pagelist)) {
> > + struct page *cur;
> > + u32 req_start;
> > + u32 req_height = (PAGE_SIZE / par->vmem_width) + 1;
> > +
> > + list_for_each_entry(cur, pagelist, lru) {
> > + req_start = (cur->index << PAGE_SHIFT) / par->vmem_width;
> > + smemlcd_frame(par, req_start, req_height);
> > + }
> > + }
> > +
> > + if(par->extmode)
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > +}
> > +
> > +static void smemlcd_update_work(struct work_struct *work)
> > +{
> > + struct smemlcd_par *par = container_of(work, struct smemlcd_par, d_work.work);
> > + struct fb_info *info = par->info;
> > +
> > + mutex_lock(&par->update_lock);
> > + smemlcd_update(par);
> > + mutex_unlock(&par->update_lock);
> > +
> > + if (!par->extmode)
> > + schedule_delayed_work(&par->d_work, info->fbdefio->delay);
> > +}
> > +
> > +static const struct fb_ops smemlcd_ops = {
> > + .owner = THIS_MODULE,
> > + .fb_read = fb_sys_read,
> > + .fb_write = smemlcd_write,
> > + .fb_fillrect = smemlcd_fillrect,
> > + .fb_copyarea = smemlcd_copyarea,
> > + .fb_imageblit = smemlcd_imageblit,
> > + .fb_blank = smemlcd_blank,
> > +};
> > +
> > +static struct smemlcd_info ls027b7dh01_info = {
> > + .width = 400,
> > + .height = 240,
> > +};
> > +
> > +static struct smemlcd_info ls044q7dh01_info = {
> > + .width = 320,
> > + .height = 240,
> > +};
> > +
> > +static struct smemlcd_info ls013b7dh05_info = {
> > + .width = 144,
> > + .height = 168,
> > +};
> > +
> > +static struct smemlcd_info ls013b7dh03_info = {
> > + .width = 128,
> > + .height = 128,
> > +};
> > +
> > +static const struct of_device_id smemlcd_of_match[] = {
> > + {
> > + .compatible = "sharp,ls027b7dh01",
> > + .data = (void *)&ls027b7dh01_info,
> > + },
> > + {
> > + .compatible = "sharp,ls044q7dh01",
> > + .data = (void *)&ls044q7dh01_info,
> > + },
> > + {
> > + .compatible = "sharp,ls013b7dh05",
> > + .data = (void *)&ls013b7dh05_info,
> > + },
> > + {
> > + .compatible = "sharp,ls013b7dh03",
> > + .data = (void *)&ls013b7dh03_info,
> > + },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, smemlcd_of_match);
> > +
> > +static int smemlcd_probe(struct spi_device *spi)
> > +{
> > + struct device *dev = &spi->dev;
> > + struct fb_info *info;
> > + struct smemlcd_par *par;
> > + const struct smemlcd_info *devinfo;
> > + struct fb_deferred_io *smemlcd_defio;
> > + struct pwm_state state;
> > + u32 vmem_size, fps;
> > + void *vmem;
> > + int ret;
> > +
> > + info = framebuffer_alloc(sizeof(struct smemlcd_par), dev);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + par = info->par;
> > + par->info = info;
> > + par->spi = spi;
> > +
> > + devinfo = device_get_match_data(dev);
> > +
> > + mutex_init(&par->update_lock);
> > + INIT_DELAYED_WORK(&par->d_work, smemlcd_update_work);
> > + par->spi_width = devinfo->width / 8;
> > + par->vmem_width = ((devinfo->width + 31) & ~31) >> 3;
> > + par->vcom = 0;
> > + par->start = 0;
> > + par->height = 0;
> > +
> > + par->disp = devm_gpiod_get_optional(dev, "disp", GPIOD_OUT_LOW);
> > + if (IS_ERR(par->disp)) {
> > + ret = PTR_ERR(par->disp);
> > + dev_err(dev, "Failed to get DISP gpio: %d\n", ret);
> > + goto free_fb;
> > + }
> > +
> > + par->spi_buf = kzalloc(devinfo->height * (par->spi_width + 2) + 2, GFP_KERNEL);
> > + if (!par->spi_buf) {
> > + ret = -ENOMEM;
> > + dev_err(dev, "Failed to allocate data for spi transfers.\n");
> > + goto free_fb;
> > + }
> > +
> > + vmem_size = par->vmem_width * devinfo->height;
> > +
> > + vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(vmem_size));
> > + if (!vmem) {
> > + ret = -ENOMEM;
> > + dev_err(dev, "Failed to allocate video memory.\n");
> > + goto free_spi_buf;
> > + }
> > +
> > + par->extmode = device_property_read_bool(dev, "sharp,extmode-high");
> > +
> > + if (device_property_read_u32(dev, "sharp,frames-per-sec", &fps))
> > + fps = 10;
> > +
> > + smemlcd_defio = devm_kzalloc(dev, sizeof(struct fb_deferred_io), GFP_KERNEL);
> > + if (!smemlcd_defio) {
> > + dev_err(dev, "Couldn't allocate deferred io.\n");
> > + ret = -ENOMEM;
> > + goto free_vmem;
> > + }
> > +
> > + smemlcd_defio->delay = HZ / fps;
> > + smemlcd_defio->deferred_io = &smemlcd_deferred_io;
> > +
> > + info->var = smemlcd_var;
> > + info->var.xres = devinfo->width;
> > + info->var.xres_virtual = devinfo->width;
> > + info->var.yres = devinfo->height;
> > + info->var.yres_virtual = devinfo->height;
> > +
> > + info->screen_buffer = vmem;
> > + info->screen_size = vmem_size;
> > +
> > + info->fbops = &smemlcd_ops;
> > + info->fix = smemlcd_fix;
> > + info->fix.line_length = par->vmem_width;
> > + info->fix.smem_start = __pa(vmem);
> > + info->fix.smem_len = vmem_size;
> > +
> > + info->fbdefio = smemlcd_defio;
> > +
> > + fb_deferred_io_init(info);
> > +
> > + spi_set_drvdata(spi, par);
> > +
> > + if (par->extmode) {
> > + par->extcomin_pwm = pwm_get(dev, NULL);
> > + if (IS_ERR(par->extcomin_pwm)) {
> > + ret = PTR_ERR(par->extcomin_pwm);
> > + dev_warn(dev, "Failed to get EXTCOMIN pwm: %d\n", ret);
> > + par->extcomin_pwm = NULL;
> > + } else {
> > +
> > + pwm_init_state(par->extcomin_pwm, &state);
> > +
> > + if (!state.period)
> > + state.period = NSEC_PER_SEC/fps;
> > +
> > + state.enabled = true;
> > + state.duty_cycle = state.period/2;
> > +
> > + ret = pwm_apply_state(par->extcomin_pwm, &state);
> > + if (ret)
> > + dev_warn(dev, "failed to apply EXTCOMIN pwm state: %d\n", ret);
> > + }
> > + } else {
> > + par->extcomin_pwm = NULL;
> > + }
> > +
> > + if (par->disp)
> > + gpiod_set_value_cansleep(par->disp, 1);
> > +
> > + /* spi test by clearing the display */
> > + par->spi_buf[0] = SMEMLCD_ALL_CLEAR;
> > + par->spi_buf[1] = SMEMLCD_DUMMY_DATA;
> > + ret = spi_write(spi, &(par->spi_buf[0]), 2);
> > + if (ret < 0){
> > + dev_err(dev, "Couldn't send SPI command\n");
> > + goto disable_hw;
> > + }
> > +
> > + ret = register_framebuffer(info);
> > + if (ret < 0) {
> > + dev_err(dev, "Failed to register framebuffer\n");
> > + goto disable_hw;
> > + }
> > +
> > + dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
> > +
> > + if (!par->extmode)
> > + schedule_delayed_work(&par->d_work, smemlcd_defio->delay);
> > +
> > + return 0;
> > +
> > +disable_hw:
> > + if (par->disp)
> > + gpiod_set_value_cansleep(par->disp, 0);
> > + if (par->extcomin_pwm) {
> > + pwm_disable(par->extcomin_pwm);
> > + pwm_put(par->extcomin_pwm);
> > + }
> > + fb_deferred_io_cleanup(info);
> > +free_vmem:
> > + kfree(vmem);
> > +free_spi_buf:
> > + kfree(par->spi_buf);
> > +free_fb:
> > + cancel_delayed_work_sync(&par->d_work);
> > + mutex_destroy(&par->update_lock);
> > + framebuffer_release(info);
> > +
> > + return ret;
> > +}
> > +
> > +static int smemlcd_remove(struct spi_device *spi)
> > +{
> > + struct smemlcd_par *par = dev_get_drvdata(&spi->dev);
> > + struct fb_info *info = par->info;
> > +
> > + cancel_delayed_work_sync(&par->d_work);
> > +
> > + fb_deferred_io_cleanup(info);
> > +
> > + unregister_framebuffer(info);
> > +
> > + if (par->disp)
> > + gpiod_set_value_cansleep(par->disp, 0);
> > +
> > + if (par->extcomin_pwm) {
> > + pwm_disable(par->extcomin_pwm);
> > + pwm_put(par->extcomin_pwm);
> > + }
> > +
> > + fb_deferred_io_cleanup(info);
> > + __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len));
> > +
> > + kfree(par->spi_buf);
> > +
> > + mutex_destroy(&par->update_lock);
> > +
> > + framebuffer_release(info);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct spi_device_id smemlcd_spi_id[] = {
> > + {"ls027b7dh01", 0},
> > + {"ls044q7dh01", 0},
> > + {"ls013b7dh05", 0},
> > + {"ls013b7dh03", 0},
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(spi, smemlcd_spi_id);
> > +
> > +static struct spi_driver smemlcd_driver = {
> > + .probe = smemlcd_probe,
> > + .remove = smemlcd_remove,
> > + .id_table = smemlcd_spi_id,
> > + .driver = {
> > + .name = "smemlcdfb",
> > + .of_match_table = smemlcd_of_match,
> > + },
> > +};
> > +module_spi_driver(smemlcd_driver);
> > +
> > +MODULE_AUTHOR("Rodrigo Alencar <455.rodrigo.alencar at gmail.com>");
> > +MODULE_DESCRIPTION("Sharp Memory LCD Linux Framebuffer Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.23.0.rc1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list