[PATCH v4 29/78] drm/vc4: crtc: Add a delay after disabling the PixelValve output

Dave Stevenson dave.stevenson at raspberrypi.com
Wed Jul 29 14:09:21 UTC 2020


Hi Maxime

On Wed, 8 Jul 2020 at 18:43, Maxime Ripard <maxime at cerno.tech> wrote:
>
> In order to avoid pixels getting stuck in the (unflushable) FIFO between
> the HVS and the PV, we need to add some delay after disabling the PV output
> and before disabling the HDMI controller. 20ms seems to be good enough so
> let's use that.
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> ---
>  drivers/gpu/drm/vc4/vc4_crtc.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
> index d0b326e1df0a..7b178d67187f 100644
> --- a/drivers/gpu/drm/vc4/vc4_crtc.c
> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
> @@ -403,6 +403,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
>         ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
>         WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
>
> +       mdelay(20);

mdelay for 20ms seems a touch unfriendly as it's a busy wait. Can we
not msleep instead?

  Dave

> +
>         if (vc4_encoder->post_crtc_disable)
>                 vc4_encoder->post_crtc_disable(encoder);
>
> --
> git-series 0.9.1


More information about the dri-devel mailing list