[PATCH v8 5/5] dt-bindings: display: imx: add bindings for DCSS

[Laurentiu Palcu]

On Wed, Jul 29, 2020 at 03:27:30PM +0200, Guido Günther wrote:
> Hi,
> On Fri, Jul 24, 2020 at 12:07:34PM +0300, Laurentiu Palcu wrote:
> > From: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> > 
> > Add bindings for iMX8MQ Display Controller Subsystem.
> > 
> > Signed-off-by: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> > Reviewed-by: Rob Herring <robh at kernel.org>
> > ---
> >  .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 104 ++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > new file mode 100644
> > index 000000000000..68e4635e4874
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > @@ -0,0 +1,104 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2019 NXP
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: iMX8MQ Display Controller Subsystem (DCSS)
> > +
> > +maintainers:
> > +  - Laurentiu Palcu <laurentiu.palcu at nxp.com>
> > +
> > +description:
> > +
> > +  The DCSS (display controller sub system) is used to source up to three
> > +  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
> > +  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
> > +  image processing capabilities are included to provide a solution capable of
> > +  driving next generation high dynamic range displays.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx8mq-dcss
> > +
> > +  reg:
> > +    items:
> > +      - description: DCSS base address and size, up to IRQ steer start
> > +      - description: DCSS BLKCTL base address and size
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Context loader completion and error interrupt
> > +      - description: DTG interrupt used to signal context loader trigger time
> > +      - description: DTG interrupt for Vblank
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: ctxld
> > +      - const: ctxld_kick
> > +      - const: vblank
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display APB clock for all peripheral PIO access interfaces
> > +      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
> > +      - description: RTRAM clock
> > +      - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
> > +      - description: DTRC clock, needed by video decompressor
> > +
> > +  clock-names:
> > +    items:
> > +      - const: apb
> > +      - const: axi
> > +      - const: rtrm
> > +      - const: pix
> > +      - const: dtrc
> > +
> > +  assigned-clocks:
> > +    items:
> > +      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
> > +      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
> > +      - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
> > +                     IMX8MQ_VIDEO_PLL1_REF_SEL
> > +
> > +  assigned-clock-parents:
> > +    items:
> > +      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
> > +      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
> > +      - description: Phandle and clock specifier of IMX8MQ_CLK_27M
> > +
> > +  assigned-clock-rates:
> > +    items:
> > +      - description: Must be 800 MHz
> > +      - description: Must be 400 MHz
> > +
> > +  port:
> > +    type: object
> > +    description:
> > +      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> 
> it would be nice to
> 
>     #include <dt-bindings/clock/imx8mq-clock.h>
> 
> here...
> 
> > +    dcss: display-controller at 32e00000 {
> > +        compatible = "nxp,imx8mq-dcss";
> > +        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
> > +        interrupts = <6>, <8>, <9>;
> > +        interrupt-names = "ctxld", "ctxld_kick", "vblank";
> > +        interrupt-parent = <&irqsteer>;
> > +        clocks = <&clk 248>, <&clk 247>, <&clk 249>,
> > +                 <&clk 254>,<&clk 122>;
> > +        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
> > +        assigned-clocks = <&clk 107>, <&clk 109>, <&clk 266>;
> > +        assigned-clock-parents = <&clk 78>, <&clk 78>, <&clk 3>;
> 
> so that clock names like IMX8MQ_CLK_DISP_AXI could be used to make this
> even more useful.

That's a good idea. I'll add it in.

Thanks,
laurentiu

> 
> Cheers,
>  -- Guido
> 
> > +        assigned-clock-rates = <800000000>,
> > +                               <400000000>;
> > +        port {
> > +            dcss_out: endpoint {
> > +                remote-endpoint = <&hdmi_in>;
> > +            };
> > +        };
> > +    };
> > +
> > -- 
> > 2.23.0
> >