[PATCH 3/3] drm/ingenic: ipu: Only enable clock when needed

[Sam Ravnborg]

On Thu, Jul 30, 2020 at 03:46:26AM +0200, Paul Cercueil wrote:
> Instead of keeping the IPU clock enabled constantly, enable and disable
> it on demand, when the IPU plane is used.

This explains what the patch does - but fails to mention why.
Could you please add the why part too.

With the chagelog updated:
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

	Sam
> 
> Signed-off-by: Paul Cercueil <paul at crapouillou.net>
> ---
>  drivers/gpu/drm/ingenic/ingenic-ipu.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> index f4f0abcd6692..17e682cf1eba 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> @@ -49,6 +49,7 @@ struct ingenic_ipu {
>  	struct regmap *map;
>  	struct clk *clk;
>  	const struct soc_info *soc_info;
> +	bool clk_enabled;
>  
>  	unsigned int num_w, num_h, denom_w, denom_h;
>  
> @@ -288,12 +289,23 @@ static void ingenic_ipu_plane_atomic_update(struct drm_plane *plane,
>  	const struct drm_format_info *finfo;
>  	u32 ctrl, stride = 0, coef_index = 0, format = 0;
>  	bool needs_modeset, upscaling_w, upscaling_h;
> +	int err;
>  
>  	if (!state || !state->fb)
>  		return;
>  
>  	finfo = drm_format_info(state->fb->format->format);
>  
> +	if (!ipu->clk_enabled) {
> +		err = clk_enable(ipu->clk);
> +		if (err) {
> +			dev_err(ipu->dev, "Unable to enable clock: %d\n", err);
> +			return;
> +		}
> +
> +		ipu->clk_enabled = true;
> +	}
> +
>  	/* Reset all the registers if needed */
>  	needs_modeset = drm_atomic_crtc_needs_modeset(state->crtc->state);
>  	if (needs_modeset) {
> @@ -578,6 +590,11 @@ static void ingenic_ipu_plane_atomic_disable(struct drm_plane *plane,
>  	regmap_clear_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN);
>  
>  	ingenic_drm_plane_disable(ipu->master, plane);
> +
> +	if (ipu->clk_enabled) {
> +		clk_disable(ipu->clk);
> +		ipu->clk_enabled = false;
> +	}
>  }
>  
>  static const struct drm_plane_helper_funcs ingenic_ipu_plane_helper_funcs = {
> @@ -761,9 +778,9 @@ static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d)
>  	drm_object_attach_property(&plane->base, ipu->sharpness_prop,
>  				   ipu->sharpness);
>  
> -	err = clk_prepare_enable(ipu->clk);
> +	err = clk_prepare(ipu->clk);
>  	if (err) {
> -		dev_err(dev, "Unable to enable clock\n");
> +		dev_err(dev, "Unable to prepare clock\n");
>  		return err;
>  	}
>  
> @@ -775,7 +792,7 @@ static void ingenic_ipu_unbind(struct device *dev,
>  {
>  	struct ingenic_ipu *ipu = dev_get_drvdata(dev);
>  
> -	clk_disable_unprepare(ipu->clk);
> +	clk_unprepare(ipu->clk);
>  }
>  
>  static const struct component_ops ingenic_ipu_ops = {
> -- 
> 2.27.0