[PATCH 02/21] drm: mxsfb: Use drm_panel_bridge
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Jun 2 17:18:49 UTC 2020
Hi Stefan,
On Tue, Jun 02, 2020 at 04:34:07PM +0200, Stefan Agner wrote:
> On 2020-06-02 15:12, Daniel Vetter wrote:
> > On Sat, May 30, 2020 at 05:14:21AM +0300, Laurent Pinchart wrote:
> >> On Mon, Mar 23, 2020 at 10:27:21PM +0100, Stefan Agner wrote:
> >>> On 2020-03-09 20:51, Laurent Pinchart wrote:
> >>>> Replace the manual connector implementation based on drm_panel with the
> >>>> drm_panel_bridge helper. This simplifies the mxsfb driver by removing
> >>>> connector-related code, and standardizing all pipeline control
> >>>> operations on bridges.
> >>>>
> >>>> A hack is needed to get hold of the connector, as that's our only source
> >>>> of bus flags and formats for now. As soon as the bridge API provides us
> >>>> with that information this can be fixed.
> >>>
> >>> This seems like a nice simplification.
> >>>
> >>> I gave this a go applied on today's drm-misc-next using a Colibri iMX7
> >>> (imx7d-colibri-emmc-eval-v3.dts device tree). This device makes use of
> >>> the simple panel driver. I get this when booting:
> >>>
> >>> [ 2.976698] [drm] Supports vblank timestamp caching Rev 2
> >>> (21.10.2013).
> >>> [ 2.983526] ------------[ cut here ]------------
> >>> [ 2.988180] WARNING: CPU: 0 PID: 1 at
> >>> drivers/gpu/drm/bridge/panel.c:267 devm_drm_panel_bridge_add+0x25/0x28
> >>> [ 2.998059] Modules linked in:
> >>> [ 3.001159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
> >>> 5.6.0-rc5-yocto-standard-01250-ga4ce5db7c9f1 #29
> >>> [ 3.010493] Hardware name: Freescale i.MX7 Dual (Device Tree)
> >>> [ 3.016281] [<c010f089>] (unwind_backtrace) from [<c010a9bb>]
> >>> (show_stack+0xb/0xc)
> >>> [ 3.023887] [<c010a9bb>] (show_stack) from [<c08b33cf>]
> >>> (dump_stack+0x63/0x70)
> >>> [ 3.031144] [<c08b33cf>] (dump_stack) from [<c0124385>]
> >>> (__warn+0x9d/0xb0)
> >>> [ 3.038047] [<c0124385>] (__warn) from [<c0124403>]
> >>> (warn_slowpath_fmt+0x6b/0x70)
> >>> [ 3.045564] [<c0124403>] (warn_slowpath_fmt) from [<c04ebf65>]
> >>> (devm_drm_panel_bridge_add+0x25/0x28)
> >>> [ 3.054736] [<c04ebf65>] (devm_drm_panel_bridge_add) from
> >>> [<c051fe7f>] (mxsfb_probe+0x197/0x2e0)
> >>> [ 3.063559] [<c051fe7f>] (mxsfb_probe) from [<c0532e91>]
> >>> (platform_drv_probe+0x2d/0x60)
> >>> [ 3.071598] [<c0532e91>] (platform_drv_probe) from [<c0531615>]
> >>> (really_probe+0x1dd/0x330)
> >>> [ 3.079897] [<c0531615>] (really_probe) from [<c05318b3>]
> >>> (driver_probe_device+0x4f/0x154)
> >>> [ 3.088195] [<c05318b3>] (driver_probe_device) from [<c0531b3f>]
> >>> (device_driver_attach+0x37/0x44)
> >>> [ 3.097101] [<c0531b3f>] (device_driver_attach) from [<c0531bc7>]
> >>> (__driver_attach+0x7b/0xec)
> >>> [ 3.105660] [<c0531bc7>] (__driver_attach) from [<c0530069>]
> >>> (bus_for_each_dev+0x3d/0x64)
> >>> [ 3.113870] [<c0530069>] (bus_for_each_dev) from [<c0530b9b>]
> >>> (bus_add_driver+0xef/0x160)
> >>> [ 3.122081] [<c0530b9b>] (bus_add_driver) from [<c053238d>]
> >>> (driver_register+0x35/0x9c)
> >>> [ 3.130119] [<c053238d>] (driver_register) from [<c0102de9>]
> >>> (do_one_initcall+0x3d/0x1e4)
> >>> [ 3.138333] [<c0102de9>] (do_one_initcall) from [<c1100d13>]
> >>> (kernel_init_freeable+0x1b3/0x1fc)
> >>> [ 3.147069] [<c1100d13>] (kernel_init_freeable) from [<c08c3f7b>]
> >>> (kernel_init+0x7/0xd0)
> >>> [ 3.155194] [<c08c3f7b>] (kernel_init) from [<c01010f9>]
> >>> (ret_from_fork+0x11/0x38)
> >>> [ 3.162789] Exception stack(0xec0e3fb0 to 0xec0e3ff8)
> >>> [ 3.167862] 3fa0: 00000000
> >>> 00000000 00000000 00000000
> >>> [ 3.176071] 3fc0: 00000000 00000000 00000000 00000000 00000000
> >>> 00000000 00000000 00000000
> >>> [ 3.184278] 3fe0: 00000000 00000000 00000000 00000000 00000013
> >>> 00000000
> >>> [ 3.191029] ---[ end trace b69e1f44de470959 ]---
> >>> [ 3.195671] mxsfb 30730000.lcdif: Cannot connect bridge: -19
> >>>
> >>> Should we maybe use devm_drm_panel_bridge_add_typed?
> >>
> >> As Sam reported, this is caused by the panel not setting connector_type.
> >> We could use devm_drm_panel_bridge_add_typed(), even if I like the
> >> warning as it uncovers the problematic panels and gets them fixed. What
> >> would be your preference ?
> >
> > Adding warnings everywhere is kinda uncool, at least my experience is that
> > if there's too much you get warning overload and train people to ignore
> > them.
> >
> > Imo either hide the wwarning for now, or if it's not too much work, review
> > all the panel drivers and make sure they set the connector type somewhere.
> > Warnings are kinda ok once you're pretty sure you got them all, and want
> > to make sure newly added drivers get this all right. But not before we've
> > reached that.
>
> I am with Daniel on this, too many warnings make users blind of them, so
> we should save them when really attention is needed.
>
> I guess the only question which connector type we should default to. I
> think DRM_MODE_CONNECTOR_DPI make sense for this IP.
Yes, that makes sense. I'll fix this in v3, but will wait until you
review the remaining patches from v2 before sending v3 out.
> >>> Two more comments below.
> >>>
> >>>> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> >>>> ---
> >>>> drivers/gpu/drm/mxsfb/Makefile | 2 +-
> >>>> drivers/gpu/drm/mxsfb/mxsfb_drv.c | 105 ++++++++++++++----------------
> >>>> drivers/gpu/drm/mxsfb/mxsfb_drv.h | 5 +-
> >>>> drivers/gpu/drm/mxsfb/mxsfb_out.c | 99 ----------------------------
> >>>> 4 files changed, 53 insertions(+), 158 deletions(-)
> >>>> delete mode 100644 drivers/gpu/drm/mxsfb/mxsfb_out.c
> >>>>
> >>>> diff --git a/drivers/gpu/drm/mxsfb/Makefile b/drivers/gpu/drm/mxsfb/Makefile
> >>>> index ff6e358088fa..811584e54ad1 100644
> >>>> --- a/drivers/gpu/drm/mxsfb/Makefile
> >>>> +++ b/drivers/gpu/drm/mxsfb/Makefile
> >>>> @@ -1,3 +1,3 @@
> >>>> # SPDX-License-Identifier: GPL-2.0-only
> >>>> -mxsfb-y := mxsfb_drv.o mxsfb_crtc.o mxsfb_out.o
> >>>> +mxsfb-y := mxsfb_drv.o mxsfb_crtc.o
> >>>> obj-$(CONFIG_DRM_MXSFB) += mxsfb.o
> >>>> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> >>>> b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> >>>> index 2e6068d96034..cffc70257bd3 100644
> >>>> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> >>>> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> >>>> @@ -29,7 +29,6 @@
> >>>> #include <drm/drm_gem_framebuffer_helper.h>
> >>>> #include <drm/drm_irq.h>
> >>>> #include <drm/drm_of.h>
> >>>> -#include <drm/drm_panel.h>
> >>>> #include <drm/drm_probe_helper.h>
> >>>> #include <drm/drm_simple_kms_helper.h>
> >>>> #include <drm/drm_vblank.h>
> >>>> @@ -100,29 +99,11 @@ static void mxsfb_pipe_enable(struct
> >>>> drm_simple_display_pipe *pipe,
> >>>> struct drm_crtc_state *crtc_state,
> >>>> struct drm_plane_state *plane_state)
> >>>> {
> >>>> - struct drm_connector *connector;
> >>>> struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
> >>>> struct drm_device *drm = pipe->plane.dev;
> >>>>
> >>>> - if (!mxsfb->connector) {
> >>>> - list_for_each_entry(connector,
> >>>> - &drm->mode_config.connector_list,
> >>>> - head)
> >>>> - if (connector->encoder == &mxsfb->pipe.encoder) {
> >>>> - mxsfb->connector = connector;
> >>>> - break;
> >>>> - }
> >>>> - }
> >>>> -
> >>>> - if (!mxsfb->connector) {
> >>>> - dev_warn(drm->dev, "No connector attached, using default\n");
> >>>> - mxsfb->connector = &mxsfb->panel_connector;
> >>>> - }
> >>>> -
> >>>> pm_runtime_get_sync(drm->dev);
> >>>> - drm_panel_prepare(mxsfb->panel);
> >>>> mxsfb_crtc_enable(mxsfb);
> >>>> - drm_panel_enable(mxsfb->panel);
> >>>> }
> >>>>
> >>>> static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
> >>>> @@ -132,9 +113,7 @@ static void mxsfb_pipe_disable(struct
> >>>> drm_simple_display_pipe *pipe)
> >>>> struct drm_crtc *crtc = &pipe->crtc;
> >>>> struct drm_pending_vblank_event *event;
> >>>>
> >>>> - drm_panel_disable(mxsfb->panel);
> >>>> mxsfb_crtc_disable(mxsfb);
> >>>> - drm_panel_unprepare(mxsfb->panel);
> >>>> pm_runtime_put_sync(drm->dev);
> >>>>
> >>>> spin_lock_irq(&drm->event_lock);
> >>>> @@ -144,9 +123,6 @@ static void mxsfb_pipe_disable(struct
> >>>> drm_simple_display_pipe *pipe)
> >>>> drm_crtc_send_vblank_event(crtc, event);
> >>>> }
> >>>> spin_unlock_irq(&drm->event_lock);
> >>>> -
> >>>> - if (mxsfb->connector != &mxsfb->panel_connector)
> >>>> - mxsfb->connector = NULL;
> >>>> }
> >>>>
> >>>> static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
> >>>> @@ -190,6 +166,48 @@ static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
> >>>> .disable_vblank = mxsfb_pipe_disable_vblank,
> >>>> };
> >>>>
> >>>> +static int mxsfb_attach_bridge(struct mxsfb_drm_private *mxsfb)
> >>>> +{
> >>>> + struct drm_device *drm = mxsfb->drm;
> >>>> + struct drm_connector_list_iter iter;
> >>>> + struct drm_panel *panel;
> >>>> + struct drm_bridge *bridge;
> >>>> + int ret;
> >>>> +
> >>>> + ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel,
> >>>> + &bridge);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> + if (panel) {
> >>>> + bridge = devm_drm_panel_bridge_add(drm->dev, panel);
> >>>
> >>> Do we need a select DRM_PANEL_BRIDGE in Kconfig maybe? From what I can
> >>> tell there is no devm_drm_panel_bridge_add() stub if DRM_PANEL_BRIDGE is
> >>> not selected.
> >>
> >> You're right, I'll add it.
> >>
> >>>> + if (IS_ERR(bridge))
> >>>> + return PTR_ERR(bridge);
> >>>> + }
> >>>> +
> >>>> + if (!bridge)
> >>>> + return -ENODEV;
> >>>> +
> >>>> + ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe, bridge);
> >>>> + if (ret) {
> >>>> + DRM_DEV_ERROR(drm->dev,
> >>>> + "failed to attach bridge: %d\n", ret);
> >>>> + return ret;
> >>>> + }
> >>>> +
> >>>> + mxsfb->bridge = bridge;
> >>>> +
> >>>> + /*
> >>>> + * Get hold of the connector. This is a bit of a hack, until the bridge
> >>>> + * API gives us bus flags and formats.
> >>>> + */
> >>>> + drm_connector_list_iter_begin(drm, &iter);
> >>>> + mxsfb->connector = drm_connector_list_iter_next(&iter);
> >>>> + drm_connector_list_iter_end(&iter);
> >>>
> >>> Could we not just use drm_panel_bridge_connector() here?
> >>
> >> There's no guarantee that mxsfb->bridge is a panel bridge, the LCDIF
> >> output could be connected to another bridge in which case
> >> drm_of_find_panel_or_bridge() will set panel to NULL and bridge to a
> >> non-NULL value).
> >>
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> static int mxsfb_load(struct drm_device *drm, unsigned long flags)
> >>>> {
> >>>> struct platform_device *pdev = to_platform_device(drm->dev);
> >>>> @@ -201,6 +219,7 @@ static int mxsfb_load(struct drm_device *drm,
> >>>> unsigned long flags)
> >>>> if (!mxsfb)
> >>>> return -ENOMEM;
> >>>>
> >>>> + mxsfb->drm = drm;
> >>>> drm->dev_private = mxsfb;
> >>>> mxsfb->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
> >>>>
> >>>> @@ -236,41 +255,17 @@ static int mxsfb_load(struct drm_device *drm,
> >>>> unsigned long flags)
> >>>> /* Modeset init */
> >>>> drm_mode_config_init(drm);
> >>>>
> >>>> - ret = mxsfb_create_output(drm);
> >>>> - if (ret < 0) {
> >>>> - dev_err(drm->dev, "Failed to create outputs\n");
> >>>> - goto err_vblank;
> >>>> - }
> >>>> -
> >>>> ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
> >>>> - mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
> >>>> - mxsfb->connector);
> >>>> + mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL, NULL);
> >>>> if (ret < 0) {
> >>>> dev_err(drm->dev, "Cannot setup simple display pipe\n");
> >>>> goto err_vblank;
> >>>> }
> >>>>
> >>>> - /*
> >>>> - * Attach panel only if there is one.
> >>>> - * If there is no panel attach, it must be a bridge. In this case, we
> >>>> - * need a reference to its connector for a proper initialization.
> >>>> - * We will do this check in pipe->enable(), since the connector won't
> >>>> - * be attached to an encoder until then.
> >>>> - */
> >>>> -
> >>>> - if (mxsfb->panel) {
> >>>> - ret = drm_panel_attach(mxsfb->panel, mxsfb->connector);
> >>>> - if (ret) {
> >>>> - dev_err(drm->dev, "Cannot connect panel: %d\n", ret);
> >>>> - goto err_vblank;
> >>>> - }
> >>>> - } else if (mxsfb->bridge) {
> >>>> - ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
> >>>> - mxsfb->bridge);
> >>>> - if (ret) {
> >>>> - dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
> >>>> - goto err_vblank;
> >>>> - }
> >>>> + ret = mxsfb_attach_bridge(mxsfb);
> >>>> + if (ret) {
> >>>> + dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
> >>>> + goto err_vblank;
> >>>> }
> >>>>
> >>>> drm->mode_config.min_width = MXSFB_MIN_XRES;
> >>>> @@ -288,7 +283,7 @@ static int mxsfb_load(struct drm_device *drm,
> >>>> unsigned long flags)
> >>>>
> >>>> if (ret < 0) {
> >>>> dev_err(drm->dev, "Failed to install IRQ handler\n");
> >>>> - goto err_irq;
> >>>> + goto err_vblank;
> >>>> }
> >>>>
> >>>> drm_kms_helper_poll_init(drm);
> >>>> @@ -299,8 +294,6 @@ static int mxsfb_load(struct drm_device *drm,
> >>>> unsigned long flags)
> >>>>
> >>>> return 0;
> >>>>
> >>>> -err_irq:
> >>>> - drm_panel_detach(mxsfb->panel);
> >>>> err_vblank:
> >>>> pm_runtime_disable(drm->dev);
> >>>>
> >>>> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> >>>> b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> >>>> index 0b65b5194a9c..0e3e5a63bbf9 100644
> >>>> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> >>>> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> >>>> @@ -8,6 +8,8 @@
> >>>> #ifndef __MXSFB_DRV_H__
> >>>> #define __MXSFB_DRV_H__
> >>>>
> >>>> +struct drm_device;
> >>>> +
> >>>> struct mxsfb_devdata {
> >>>> unsigned int transfer_count;
> >>>> unsigned int cur_buf;
> >>>> @@ -26,10 +28,9 @@ struct mxsfb_drm_private {
> >>>> struct clk *clk_axi;
> >>>> struct clk *clk_disp_axi;
> >>>>
> >>>> + struct drm_device *drm;
> >>>> struct drm_simple_display_pipe pipe;
> >>>> - struct drm_connector panel_connector;
> >>>> struct drm_connector *connector;
> >>>> - struct drm_panel *panel;
> >>>> struct drm_bridge *bridge;
> >>>> };
> >>>>
> >>>> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> >>>> b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> >>>> deleted file mode 100644
> >>>> index 9eca1605d11d..000000000000
> >>>> --- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> >>>> +++ /dev/null
> >>>> @@ -1,99 +0,0 @@
> >>>> -// SPDX-License-Identifier: GPL-2.0-or-later
> >>>> -/*
> >>>> - * Copyright (C) 2016 Marek Vasut <marex at denx.de>
> >>>> - */
> >>>> -
> >>>> -#include <linux/of_graph.h>
> >>>> -
> >>>> -#include <drm/drm_atomic.h>
> >>>> -#include <drm/drm_atomic_helper.h>
> >>>> -#include <drm/drm_crtc.h>
> >>>> -#include <drm/drm_fb_cma_helper.h>
> >>>> -#include <drm/drm_gem_cma_helper.h>
> >>>> -#include <drm/drm_of.h>
> >>>> -#include <drm/drm_panel.h>
> >>>> -#include <drm/drm_plane_helper.h>
> >>>> -#include <drm/drm_probe_helper.h>
> >>>> -#include <drm/drm_simple_kms_helper.h>
> >>>> -
> >>>> -#include "mxsfb_drv.h"
> >>>> -
> >>>> -static struct mxsfb_drm_private *
> >>>> -drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
> >>>> -{
> >>>> - return container_of(connector, struct mxsfb_drm_private,
> >>>> - panel_connector);
> >>>> -}
> >>>> -
> >>>> -static int mxsfb_panel_get_modes(struct drm_connector *connector)
> >>>> -{
> >>>> - struct mxsfb_drm_private *mxsfb =
> >>>> - drm_connector_to_mxsfb_drm_private(connector);
> >>>> -
> >>>> - if (mxsfb->panel)
> >>>> - return drm_panel_get_modes(mxsfb->panel, connector);
> >>>> -
> >>>> - return 0;
> >>>> -}
> >>>> -
> >>>> -static const struct
> >>>> -drm_connector_helper_funcs mxsfb_panel_connector_helper_funcs = {
> >>>> - .get_modes = mxsfb_panel_get_modes,
> >>>> -};
> >>>> -
> >>>> -static enum drm_connector_status
> >>>> -mxsfb_panel_connector_detect(struct drm_connector *connector, bool force)
> >>>> -{
> >>>> - struct mxsfb_drm_private *mxsfb =
> >>>> - drm_connector_to_mxsfb_drm_private(connector);
> >>>> -
> >>>> - if (mxsfb->panel)
> >>>> - return connector_status_connected;
> >>>> -
> >>>> - return connector_status_disconnected;
> >>>> -}
> >>>> -
> >>>> -static void mxsfb_panel_connector_destroy(struct drm_connector *connector)
> >>>> -{
> >>>> - struct mxsfb_drm_private *mxsfb =
> >>>> - drm_connector_to_mxsfb_drm_private(connector);
> >>>> -
> >>>> - if (mxsfb->panel)
> >>>> - drm_panel_detach(mxsfb->panel);
> >>>> -
> >>>> - drm_connector_unregister(connector);
> >>>> - drm_connector_cleanup(connector);
> >>>> -}
> >>>> -
> >>>> -static const struct drm_connector_funcs mxsfb_panel_connector_funcs = {
> >>>> - .detect = mxsfb_panel_connector_detect,
> >>>> - .fill_modes = drm_helper_probe_single_connector_modes,
> >>>> - .destroy = mxsfb_panel_connector_destroy,
> >>>> - .reset = drm_atomic_helper_connector_reset,
> >>>> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> >>>> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> >>>> -};
> >>>> -
> >>>> -int mxsfb_create_output(struct drm_device *drm)
> >>>> -{
> >>>> - struct mxsfb_drm_private *mxsfb = drm->dev_private;
> >>>> - int ret;
> >>>> -
> >>>> - ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
> >>>> - &mxsfb->panel, &mxsfb->bridge);
> >>>> - if (ret)
> >>>> - return ret;
> >>>> -
> >>>> - if (mxsfb->panel) {
> >>>> - mxsfb->connector = &mxsfb->panel_connector;
> >>>> - mxsfb->connector->dpms = DRM_MODE_DPMS_OFF;
> >>>> - mxsfb->connector->polled = 0;
> >>>> - drm_connector_helper_add(mxsfb->connector,
> >>>> - &mxsfb_panel_connector_helper_funcs);
> >>>> - ret = drm_connector_init(drm, mxsfb->connector,
> >>>> - &mxsfb_panel_connector_funcs,
> >>>> - DRM_MODE_CONNECTOR_Unknown);
> >>>> - }
> >>>> -
> >>>> - return ret;
> >>>> -}
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list