[PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin
Jian-Hong Pan
jian-hong at endlessm.com
Fri Jun 5 08:44:51 UTC 2020
Maxime Ripard <maxime at cerno.tech> 於 2020年6月2日 週二 下午7:04寫道：
>
> Hi,
>
> On Mon, Jun 01, 2020 at 03:58:26PM +0800, Jian-Hong Pan wrote:
> > Maxime Ripard <maxime at cerno.tech> 於 2020年5月28日 週四 下午3:30寫道：
> > >
> > > Hi Daniel,
> > >
> > > On Wed, May 27, 2020 at 05:15:12PM +0800, Daniel Drake wrote:
> > > > On Wed, May 27, 2020 at 5:13 PM Maxime Ripard <maxime at cerno.tech> wrote:
> > > > > I'm about to send a v3 today or tomorrow, I can Cc you (and Jian-Hong) if you
> > > > > want.
> > > >
> > > > That would be great, although given the potentially inconsistent
> > > > results we've been seeing so far it would be great if you could
> > > > additionally push a git branch somewhere.
> > > > That way we can have higher confidence that we are applying exactly
> > > > the same patches to the same base etc.
> > >
> > > So I sent a new iteration yesterday, and of course forgot to cc you... Sorry for
> > > that.
> > >
> > > I've pushed my current branch here:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git/log/?h=rpi4-kms
> >
> > Thanks to Maxime!
> >
> > I have tried your repository on branch rpi4-kms. The DRM VC4 is used!
> > But got some issues:
> > 1. Some weird error message in dmesg. Not sure it is related, or not
> > [ 5.219321] [drm:vc5_hdmi_init_resources] *ERROR* Failed to get
> > HDMI state machine clock
> > https://gist.github.com/starnight/3f317dca121065a361cf08e91225e389
>
> That's a deferred probing. The first time the HDMI driver is being
> probed, the firmware clock driver has not been probed yet. It's making
> another attempt later on, which succeeds.
>
> > 2. The screen flashes suddenly sometimes.
I append drm.debug=0x3 to boot command. Whenever, the screen flashes,
I notice the logs like this:
Jun 01 15:22:40 endless kernel: [drm:drm_calc_timestamping_constants]
crtc 64: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
Jun 01 15:22:40 endless kernel: [drm:drm_calc_timestamping_constants]
crtc 64: clock 148500 kHz framedur 16666666 linedur 14814
Jun 01 15:22:40 endless kernel: [drm:drm_vblank_enable] enabling
vblank on crtc 3, ret: 0
Jun 01 15:22:40 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 159 (2)
Jun 01 15:22:40 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 154 (1)
Jun 01 15:22:40 endless kernel: [drm:vblank_disable_fn] disabling
vblank on crtc 3
Jun 01 15:22:42 endless kernel: [drm:drm_ioctl] pid=584, dev=0xe200,
auth=1, DRM_IOCTL_MODE_CURSOR
Jun 01 15:22:42 endless kernel: [drm:drm_ioctl] pid=584, dev=0xe200,
auth=1, DRM_IOCTL_MODE_CURSOR2
Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_get] OBJ ID: 159 (1)
Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_get] OBJ ID: 154 (1)
Jun 01 15:22:42 endless kernel: [drm:drm_calc_timestamping_constants]
crtc 64: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
Jun 01 15:22:42 endless kernel: [drm:drm_calc_timestamping_constants]
crtc 64: clock 148500 kHz framedur 16666666 linedur 14814
Jun 01 15:22:42 endless kernel: [drm:drm_vblank_enable] enabling
vblank on crtc 3, ret: 0
Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 159 (2)
Jun 01 15:22:42 endless kernel: [drm:drm_mode_object_put.part.0] OBJ ID: 154 (2)
Here is the full log
https://gist.github.com/starnight/85d641819839eddc7a55ca7173990a56
> > 3. The higher resolutions, like 1920x1080 ... are lost after hot
> > re-plug HDMI cable (HDMI0)
I should explain this in more detail. Here are the steps to reproduce
this issue:
1. Before unplug the HDMI cable from HDMI0 port.
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 2048 x 2048
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x
axis y axis) 521mm x 293mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 59.90
1280x960 60.00
1152x864 75.00
1280x720 60.00 50.00 59.94
1440x576 50.00
1024x768 75.03 70.07 60.00
1440x480 60.00 59.94
832x624 74.55
800x600 72.19 75.00 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
HDMI-2 disconnected (normal left inverted right x axis y axis)
2. Unplug the HDMI cable from HDMI0 port.
3. Plug the HDMI cable to **HDMI1** port.
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 2048 x 2048
HDMI-1 disconnected (normal left inverted right x axis y axis)
HDMI-2 connected primary 1920x1080+0+0 (normal left inverted right x
axis y axis) 521mm x 293mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 59.90
1280x960 60.00
1152x864 75.00
1280x720 60.00 50.00 59.94
1440x576 50.00
1024x768 75.03 70.07 60.00
1440x480 60.00 59.94
832x624 74.55
800x600 72.19 75.00 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
4. Unplug the HDMI cable from **HDMI1** port.
5. Plug the HDMI cable back to HDMI0 port.
$ xrandr
Screen 0: minimum 320 x 200, current 1368 x 768, maximum 2048 x 2048
HDMI-1 connected primary 1368x768+0+0 (normal left inverted right x
axis y axis) 0mm x 0mm
1368x768 59.88*
1360x768 59.80
1280x800 59.81
1152x864 60.00
1280x720 59.86
1024x768 60.00
1024x576 59.90
960x540 59.63
800x600 60.32
800x450 59.82
700x450 59.88
640x480 59.94
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32
320x240 60.05
HDMI-2 disconnected (normal left inverted right x axis y axis)
Jian-Hong Pan
> I'm not sure on how to exactly reproduce those issues (or what they are)
> though, can you expand on this?
>
> Maxime
More information about the dri-devel
mailing list