[PATCH 3/3] drm/ast: Use per-device logging macros

Sam Ravnborg sam at ravnborg.org
Thu Jun 11 19:24:06 UTC 2020


Hi Thomas.
On Thu, Jun 11, 2020 at 10:28:09AM +0200, Thomas Zimmermann wrote:
> Converts the ast driver to drm_info() and drm_err(). No functional
> changes are made.
> 
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Acked-by: Sam Ravnborg <sam at ravnborg.org>

I hope you will later follow-up with a patch that introduces drm_WARN_*.

	Sam

> ---
>  drivers/gpu/drm/ast/ast_main.c | 34 +++++++++++++++++-----------------
>  drivers/gpu/drm/ast/ast_mode.c |  8 ++++----
>  drivers/gpu/drm/ast/ast_post.c |  2 +-
>  drivers/gpu/drm/ast/ast_ttm.c  |  2 +-
>  4 files changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
> index a2ef3d9077671..9063fdc9e8852 100644
> --- a/drivers/gpu/drm/ast/ast_main.c
> +++ b/drivers/gpu/drm/ast/ast_main.c
> @@ -79,7 +79,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>  					scu_rev)) {
>  		/* We do, disable P2A access */
>  		ast->config_mode = ast_use_dt;
> -		DRM_INFO("Using device-tree for configuration\n");
> +		drm_info(dev, "Using device-tree for configuration\n");
>  		return;
>  	}
>  
> @@ -101,7 +101,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>  			/* P2A works, grab silicon revision */
>  			ast->config_mode = ast_use_p2a;
>  
> -			DRM_INFO("Using P2A bridge for configuration\n");
> +			drm_info(dev, "Using P2A bridge for configuration\n");
>  
>  			/* Read SCU7c (silicon revision register) */
>  			ast_write32(ast, 0xf004, 0x1e6e0000);
> @@ -112,7 +112,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
>  	}
>  
>  	/* We have a P2A bridge but it's disabled */
> -	DRM_INFO("P2A bridge disabled, using default configuration\n");
> +	drm_info(dev, "P2A bridge disabled, using default configuration\n");
>  }
>  
>  static int ast_detect_chip(struct drm_device *dev, bool *need_post)
> @@ -128,7 +128,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>  	 */
>  	if (!ast_is_vga_enabled(dev)) {
>  		ast_enable_vga(dev);
> -		DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
> +		drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
>  		*need_post = true;
>  	} else
>  		*need_post = false;
> @@ -144,36 +144,36 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>  	/* Identify chipset */
>  	if (dev->pdev->revision >= 0x40) {
>  		ast->chip = AST2500;
> -		DRM_INFO("AST 2500 detected\n");
> +		drm_info(dev, "AST 2500 detected\n");
>  	} else if (dev->pdev->revision >= 0x30) {
>  		ast->chip = AST2400;
> -		DRM_INFO("AST 2400 detected\n");
> +		drm_info(dev, "AST 2400 detected\n");
>  	} else if (dev->pdev->revision >= 0x20) {
>  		ast->chip = AST2300;
> -		DRM_INFO("AST 2300 detected\n");
> +		drm_info(dev, "AST 2300 detected\n");
>  	} else if (dev->pdev->revision >= 0x10) {
>  		switch (scu_rev & 0x0300) {
>  		case 0x0200:
>  			ast->chip = AST1100;
> -			DRM_INFO("AST 1100 detected\n");
> +			drm_info(dev, "AST 1100 detected\n");
>  			break;
>  		case 0x0100:
>  			ast->chip = AST2200;
> -			DRM_INFO("AST 2200 detected\n");
> +			drm_info(dev, "AST 2200 detected\n");
>  			break;
>  		case 0x0000:
>  			ast->chip = AST2150;
> -			DRM_INFO("AST 2150 detected\n");
> +			drm_info(dev, "AST 2150 detected\n");
>  			break;
>  		default:
>  			ast->chip = AST2100;
> -			DRM_INFO("AST 2100 detected\n");
> +			drm_info(dev, "AST 2100 detected\n");
>  			break;
>  		}
>  		ast->vga2_clone = false;
>  	} else {
>  		ast->chip = AST2000;
> -		DRM_INFO("AST 2000 detected\n");
> +		drm_info(dev, "AST 2000 detected\n");
>  	}
>  
>  	/* Check if we support wide screen */
> @@ -248,13 +248,13 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
>  	/* Print stuff for diagnostic purposes */
>  	switch(ast->tx_chip_type) {
>  	case AST_TX_SIL164:
> -		DRM_INFO("Using Sil164 TMDS transmitter\n");
> +		drm_info(dev, "Using Sil164 TMDS transmitter\n");
>  		break;
>  	case AST_TX_DP501:
> -		DRM_INFO("Using DP501 DisplayPort transmitter\n");
> +		drm_info(dev, "Using DP501 DisplayPort transmitter\n");
>  		break;
>  	default:
> -		DRM_INFO("Analog VGA only\n");
> +		drm_info(dev, "Analog VGA only\n");
>  	}
>  	return 0;
>  }
> @@ -443,7 +443,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
>  	 * and higher).
>  	 */
>  	if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
> -		DRM_INFO("platform has no IO space, trying MMIO\n");
> +		drm_info(dev, "platform has no IO space, trying MMIO\n");
>  		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
>  	}
>  
> @@ -465,7 +465,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
>  	if (ret)
>  		goto out_free;
>  	ast->vram_size = ast_get_vram_info(dev);
> -	DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
> +	drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
>  		 ast->mclk, ast->dram_type,
>  		 ast->dram_bus_width, ast->vram_size);
>  
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index 10211751182da..ff789f2db9fc8 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -1104,7 +1104,7 @@ static int ast_connector_init(struct drm_device *dev)
>  	connector = &ast_connector->base;
>  	ast_connector->i2c = ast_i2c_create(dev);
>  	if (!ast_connector->i2c)
> -		DRM_ERROR("failed to add ddc bus for connector\n");
> +		drm_err(dev, "failed to add ddc bus for connector\n");
>  
>  	drm_connector_init_with_ddc(dev, connector,
>  				    &ast_connector_funcs,
> @@ -1188,7 +1188,7 @@ int ast_mode_init(struct drm_device *dev)
>  				       ARRAY_SIZE(ast_primary_plane_formats),
>  				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
>  	if (ret) {
> -		DRM_ERROR("ast: drm_universal_plane_init() failed: %d\n", ret);
> +		drm_err(dev, "ast: drm_universal_plane_init() failed: %d\n", ret);
>  		return ret;
>  	}
>  	drm_plane_helper_add(&ast->primary_plane,
> @@ -1200,7 +1200,7 @@ int ast_mode_init(struct drm_device *dev)
>  				       ARRAY_SIZE(ast_cursor_plane_formats),
>  				       NULL, DRM_PLANE_TYPE_CURSOR, NULL);
>  	if (ret) {
> -		DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
> +		drm_err(dev, "drm_universal_plane_failed(): %d\n", ret);
>  		return ret;
>  	}
>  	drm_plane_helper_add(&ast->cursor_plane,
> @@ -1322,7 +1322,7 @@ static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev)
>  	i2c->bit.getscl = get_clock;
>  	ret = i2c_bit_add_bus(&i2c->adapter);
>  	if (ret) {
> -		DRM_ERROR("Failed to register bit i2c\n");
> +		drm_err(dev, "Failed to register bit i2c\n");
>  		goto out_free;
>  	}
>  
> diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
> index 226e1290227ad..c043fe7175530 100644
> --- a/drivers/gpu/drm/ast/ast_post.c
> +++ b/drivers/gpu/drm/ast/ast_post.c
> @@ -2067,7 +2067,7 @@ void ast_post_chip_2500(struct drm_device *dev)
>  		}
>  
>  		if (!ast_dram_init_2500(ast))
> -			DRM_ERROR("DRAM init failed !\n");
> +			drm_err(dev, "DRAM init failed !\n");
>  
>  		temp = ast_mindwm(ast, 0x1e6e2040);
>  		ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
> diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
> index fad34106083a8..9c3788a4c1c54 100644
> --- a/drivers/gpu/drm/ast/ast_ttm.c
> +++ b/drivers/gpu/drm/ast/ast_ttm.c
> @@ -44,7 +44,7 @@ int ast_mm_init(struct ast_private *ast)
>  		ast->vram_size);
>  	if (IS_ERR(vmm)) {
>  		ret = PTR_ERR(vmm);
> -		DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
> +		drm_err(dev, "Error initializing VRAM MM; %d\n", ret);
>  		return ret;
>  	}
>  
> -- 
> 2.26.2


More information about the dri-devel mailing list