[PATCH v2 2/5] drm/panel: lvds: Set up panel orientation

[Dmitry Osipenko]

The panel orientation needs to parsed from a device-tree and assigned to
the panel's connector in order to make orientation property available to
userspace. That's what this patch does for the generic LVDS panel.

Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
 drivers/gpu/drm/panel/panel-lvds.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 5ce3f4a2b7a1..333d21cee5f6 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -37,6 +37,8 @@ struct panel_lvds {
 
 	struct gpio_desc *enable_gpio;
 	struct gpio_desc *reset_gpio;
+
+	enum drm_panel_orientation orientation;
 };
 
 static inline struct panel_lvds *to_panel_lvds(struct drm_panel *panel)
@@ -99,6 +101,7 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
 	connector->display_info.bus_flags = lvds->data_mirror
 					  ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
 					  : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+	drm_connector_set_panel_orientation(connector, lvds->orientation);
 
 	return 1;
 }
@@ -223,6 +226,11 @@ static int panel_lvds_probe(struct platform_device *pdev)
 	drm_panel_init(&lvds->panel, lvds->dev, &panel_lvds_funcs,
 		       DRM_MODE_CONNECTOR_LVDS);
 
+	ret = of_drm_get_panel_orientation(lvds->dev->of_node,
+					   &lvds->orientation);
+	if (ret)
+		return ret;
+
 	ret = drm_panel_of_backlight(&lvds->panel);
 	if (ret)
 		return ret;
-- 
2.26.0