[PATCH v3 03/22] drm: mxsfb: Use BIT() macro to define register bitfields

[Laurent Pinchart]

Using BIT() is preferred over manual shifts as it's more readable,
handles the 1 << 31 case properly, and avoids other mistakes as shown by
the DEBUG0_HSYNC and DEBUG0_VSYNC bits (that are currently unused). Use
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Stefan Agner <stefan at agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov at gmail.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_regs.h | 56 +++++++++++++++---------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
index 932d7ea08fd5..713d8f830135 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_regs.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
@@ -28,51 +28,51 @@
 #define LCDC_V4_DEBUG0			0x1d0
 #define LCDC_V3_DEBUG0			0x1f0
 
-#define CTRL_SFTRST			(1 << 31)
-#define CTRL_CLKGATE			(1 << 30)
-#define CTRL_BYPASS_COUNT		(1 << 19)
-#define CTRL_VSYNC_MODE			(1 << 18)
-#define CTRL_DOTCLK_MODE		(1 << 17)
-#define CTRL_DATA_SELECT		(1 << 16)
+#define CTRL_SFTRST			BIT(31)
+#define CTRL_CLKGATE			BIT(30)
+#define CTRL_BYPASS_COUNT		BIT(19)
+#define CTRL_VSYNC_MODE			BIT(18)
+#define CTRL_DOTCLK_MODE		BIT(17)
+#define CTRL_DATA_SELECT		BIT(16)
 #define CTRL_SET_BUS_WIDTH(x)		(((x) & 0x3) << 10)
 #define CTRL_GET_BUS_WIDTH(x)		(((x) >> 10) & 0x3)
 #define CTRL_BUS_WIDTH_MASK		(0x3 << 10)
 #define CTRL_SET_WORD_LENGTH(x)		(((x) & 0x3) << 8)
 #define CTRL_GET_WORD_LENGTH(x)		(((x) >> 8) & 0x3)
-#define CTRL_MASTER			(1 << 5)
-#define CTRL_DF16			(1 << 3)
-#define CTRL_DF18			(1 << 2)
-#define CTRL_DF24			(1 << 1)
-#define CTRL_RUN			(1 << 0)
+#define CTRL_MASTER			BIT(5)
+#define CTRL_DF16			BIT(3)
+#define CTRL_DF18			BIT(2)
+#define CTRL_DF24			BIT(1)
+#define CTRL_RUN			BIT(0)
 
-#define CTRL1_FIFO_CLEAR		(1 << 21)
+#define CTRL1_FIFO_CLEAR		BIT(21)
 #define CTRL1_SET_BYTE_PACKAGING(x)	(((x) & 0xf) << 16)
 #define CTRL1_GET_BYTE_PACKAGING(x)	(((x) >> 16) & 0xf)
-#define CTRL1_CUR_FRAME_DONE_IRQ_EN	(1 << 13)
-#define CTRL1_CUR_FRAME_DONE_IRQ	(1 << 9)
+#define CTRL1_CUR_FRAME_DONE_IRQ_EN	BIT(13)
+#define CTRL1_CUR_FRAME_DONE_IRQ	BIT(9)
 
 #define TRANSFER_COUNT_SET_VCOUNT(x)	(((x) & 0xffff) << 16)
 #define TRANSFER_COUNT_GET_VCOUNT(x)	(((x) >> 16) & 0xffff)
 #define TRANSFER_COUNT_SET_HCOUNT(x)	((x) & 0xffff)
 #define TRANSFER_COUNT_GET_HCOUNT(x)	((x) & 0xffff)
 
-#define VDCTRL0_ENABLE_PRESENT		(1 << 28)
-#define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27)
-#define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26)
-#define VDCTRL0_DOTCLK_ACT_FALLING	(1 << 25)
-#define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24)
-#define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21)
-#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20)
-#define VDCTRL0_HALF_LINE		(1 << 19)
-#define VDCTRL0_HALF_LINE_MODE		(1 << 18)
+#define VDCTRL0_ENABLE_PRESENT		BIT(28)
+#define VDCTRL0_VSYNC_ACT_HIGH		BIT(27)
+#define VDCTRL0_HSYNC_ACT_HIGH		BIT(26)
+#define VDCTRL0_DOTCLK_ACT_FALLING	BIT(25)
+#define VDCTRL0_ENABLE_ACT_HIGH		BIT(24)
+#define VDCTRL0_VSYNC_PERIOD_UNIT	BIT(21)
+#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	BIT(20)
+#define VDCTRL0_HALF_LINE		BIT(19)
+#define VDCTRL0_HALF_LINE_MODE		BIT(18)
 #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
 #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
 
 #define VDCTRL2_SET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
 #define VDCTRL2_GET_HSYNC_PERIOD(x)	((x) & 0x3ffff)
 
-#define VDCTRL3_MUX_SYNC_SIGNALS	(1 << 29)
-#define VDCTRL3_VSYNC_ONLY		(1 << 28)
+#define VDCTRL3_MUX_SYNC_SIGNALS	BIT(29)
+#define VDCTRL3_VSYNC_ONLY		BIT(28)
 #define SET_HOR_WAIT_CNT(x)		(((x) & 0xfff) << 16)
 #define GET_HOR_WAIT_CNT(x)		(((x) >> 16) & 0xfff)
 #define SET_VERT_WAIT_CNT(x)		((x) & 0xffff)
@@ -80,11 +80,11 @@
 
 #define VDCTRL4_SET_DOTCLK_DLY(x)	(((x) & 0x7) << 29) /* v4 only */
 #define VDCTRL4_GET_DOTCLK_DLY(x)	(((x) >> 29) & 0x7) /* v4 only */
-#define VDCTRL4_SYNC_SIGNALS_ON		(1 << 18)
+#define VDCTRL4_SYNC_SIGNALS_ON		BIT(18)
 #define SET_DOTCLK_H_VALID_DATA_CNT(x)	((x) & 0x3ffff)
 
-#define DEBUG0_HSYNC			(1 < 26)
-#define DEBUG0_VSYNC			(1 < 25)
+#define DEBUG0_HSYNC			BIT(26)
+#define DEBUG0_VSYNC			BIT(25)
 
 #define MXSFB_MIN_XRES			120
 #define MXSFB_MIN_YRES			120
-- 
Regards,

Laurent Pinchart