[PATCH v3 07/22] drm: mxsfb: Use LCDC_CTRL register name explicitly

[Laurent Pinchart]

The LCDC_CTRL register is located at address 0x0000. Some of the
accesses to the register simply use the mxsfb->base address. Reference
the LCDC_CTRL register explicitly instead to clarify the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Stefan Agner <stefan at agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov at gmail.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index be60c4021e2f..722bd9b4f5f9 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -170,17 +170,17 @@ static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb)
 {
 	int ret;
 
-	ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
+	ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, MODULE_SFTRST);
 	if (ret)
 		return ret;
 
-	writel(MODULE_CLKGATE, mxsfb->base + MXS_CLR_ADDR);
+	writel(MODULE_CLKGATE, mxsfb->base + LCDC_CTRL + MXS_CLR_ADDR);
 
-	ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
+	ret = clear_poll_bit(mxsfb->base + LCDC_CTRL, MODULE_SFTRST);
 	if (ret)
 		return ret;
 
-	return clear_poll_bit(mxsfb->base, MODULE_CLKGATE);
+	return clear_poll_bit(mxsfb->base + LCDC_CTRL, MODULE_CLKGATE);
 }
 
 static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
-- 
Regards,

Laurent Pinchart