[RFC PATCH 1/2] drm/hyperv: Add DRM driver for hyperv synthetic video device
Thomas Zimmermann
tzimmermann at suse.de
Tue Jun 23 07:59:23 UTC 2020
Hi Deepak
I did not receive you pat series, so I can only comment on Sam's reply.
See below for some points.
Am 22.06.20 um 17:19 schrieb Sam Ravnborg:
> Hi Deepak
>
> On Mon, Jun 22, 2020 at 04:06:22AM -0700, Deepak Rawat wrote:
>> DRM driver for hyperv synthetic video device, based on hyperv_fb
>> framebuffer driver. Also added config option "DRM_HYPERV" to enabled
>> this driver.
>
> Just a buch of drive-by comments while browsing the code.
> In general code looks good, especialyl for a v1.
>
> There is a few places that triggers warnings with checkpatch --strict
> Most looks like things that should be fixed.
>
>
> Sam
>
>>
>> Signed-off-by: Deepak Rawat <drawat.floss at gmail.com>
>> ---
>> drivers/gpu/drm/tiny/Kconfig | 9 +
>> drivers/gpu/drm/tiny/Makefile | 1 +
>> drivers/gpu/drm/tiny/hyperv_drm.c | 1007 +++++++++++++++++++++++++++++
>> 3 files changed, 1017 insertions(+)
>> create mode 100644 drivers/gpu/drm/tiny/hyperv_drm.c
>>
>> diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
>> index 2b6414f0fa75..e6d53e60a9c2 100644
>> --- a/drivers/gpu/drm/tiny/Kconfig
>> +++ b/drivers/gpu/drm/tiny/Kconfig
>> @@ -28,6 +28,15 @@ config DRM_GM12U320
>> This is a KMS driver for projectors which use the GM12U320 chipset
>> for video transfer over USB2/3, such as the Acer C120 mini projector.
>>
>> +config DRM_HYPERV
>> + tristate "DRM Support for hyperv synthetic video device"
>> + depends on DRM && PCI && MMU && HYPERV
>> + select DRM_KMS_HELPER
>> + select DRM_GEM_SHMEM_HELPER
>> + help
>> + This is a KMS driver for for hyperv synthetic video device.
>> + If M is selected the module will be called hyperv_drm.
>> +
>> config TINYDRM_HX8357D
>> tristate "DRM support for HX8357D display panels"
>> depends on DRM && SPI
>> diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
>> index 6ae4e9e5a35f..837cb2c2637e 100644
>> --- a/drivers/gpu/drm/tiny/Makefile
>> +++ b/drivers/gpu/drm/tiny/Makefile
>> @@ -2,6 +2,7 @@
>>
>> obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o
>> obj-$(CONFIG_DRM_GM12U320) += gm12u320.o
>> +obj-$(CONFIG_DRM_HYPERV) += hyperv_drm.o
>> obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o
>> obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o
>> obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o
>> diff --git a/drivers/gpu/drm/tiny/hyperv_drm.c b/drivers/gpu/drm/tiny/hyperv_drm.c
>> new file mode 100644
>> index 000000000000..3d020586056e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/tiny/hyperv_drm.c
>> @@ -0,0 +1,1007 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright 2012-2020 Microsoft
>> + *
>> + * Authors:
>> + * Deepak Rawat <drawat.floss at gmail.com>
>> + *
>> + * Portions of this code is derived from hyperv_fb.c
>> + * drivers/video/fbdev/hyperv_fb.c - framebuffer driver for hyperv synthetic
>> + * video device.
>> + *
>> + */
>> +
>> +#include <linux/console.h>
>> +#include <linux/module.h>
>> +#include <linux/pci.h>
>> +#include <linux/hyperv.h>
> Alphabetic order.
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_atomic_state_helper.h>
>> +#include <drm/drm_connector.h>
>> +#include <drm/drm_damage_helper.h>
>> +#include <drm/drm_drv.h>
>> +#include <drm/drm_fb_helper.h>
>> +#include <drm/drm_file.h>
> Needed?
>
>> +#include <drm/drm_format_helper.h>
>> +#include <drm/drm_fourcc.h>
>> +#include <drm/drm_gem_shmem_helper.h>
>> +#include <drm/drm_gem_framebuffer_helper.h>
>> +#include <drm/drm_ioctl.h>
>> +#include <drm/drm_managed.h>
>> +#include <drm/drm_modeset_helper_vtables.h>
>> +#include <drm/drm_probe_helper.h>
>> +#include <drm/drm_simple_kms_helper.h>
>
>> +
>> +#define DRIVER_NAME "hyperv_drm"
>> +#define DRIVER_DESC "DRM driver for hyperv synthetic video device"
>> +#define DRIVER_DATE "2020"
>> +#define DRIVER_MAJOR 1
>> +#define DRIVER_MINOR 0
>> +
>> +#define VMBUS_MAX_PACKET_SIZE 0x4000
>> +#define VMBUS_RING_BUFSIZE (256 * 1024)
>> +#define VMBUS_VSP_TIMEOUT (10 * HZ)
>> +
>> +#define PCI_VENDOR_ID_MICROSOFT 0x1414
>> +#define PCI_DEVICE_ID_HYPERV_VIDEO 0x5353
>> +
>> +struct hyperv_device {
>
> This is much more than a device - maybe just name it "struct hv"?
I think hyperv_device is good. And it's much more than just 'hv'.
>
>> + /* drm */
>> + struct drm_device dev;
>> + struct drm_simple_display_pipe pipe;
>> + struct drm_connector connector;
>> +
>> + /* mode */
>> + u32 screen_width_max;
>> + u32 screen_height_max;
>> + u32 preferred_width;
>> + u32 preferred_height;
>> + u32 screen_depth;
>> +
>> + /* hw */
>> + void __iomem *vram;
>> + unsigned long fb_base;
>> + unsigned long fb_size;
>> + struct completion wait;
>> + u32 synthvid_version;
>> + u32 mmio_megabytes;
>> + bool init_done;
This field is unused. Please remove.
>> +
>> + u8 init_buf[VMBUS_MAX_PACKET_SIZE];
>> + u8 recv_buf[VMBUS_MAX_PACKET_SIZE];
>> +
>> + struct hv_device *hdev;
>> +};
>> +
>> +#define to_hv(_dev) container_of(_dev, struct hyperv_device, dev)
Could this be a function?
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* Hyper-V Synthetic Video Protocol */
The comments look awkward. Unless this style has been used within DRM,
maybe just use
/*
* ...
*/
>> +
>> +#define SYNTHVID_VERSION(major, minor) ((minor) << 16 | (major))
>> +#define SYNTHVID_VER_GET_MAJOR(ver) (ver & 0x0000ffff)
>> +#define SYNTHVID_VER_GET_MINOR(ver) ((ver & 0xffff0000) >> 16)
>> +#define SYNTHVID_VERSION_WIN7 SYNTHVID_VERSION(3, 0)
>> +#define SYNTHVID_VERSION_WIN8 SYNTHVID_VERSION(3, 2)
>> +#define SYNTHVID_VERSION_WIN10 SYNTHVID_VERSION(3, 5)
>> +
>> +#define SYNTHVID_DEPTH_WIN7 16
>> +#define SYNTHVID_DEPTH_WIN8 32
>> +#define SYNTHVID_FB_SIZE_WIN7 (4 * 1024 * 1024)
>> +#define SYNTHVID_FB_SIZE_WIN8 (8 * 1024 * 1024)
>> +#define SYNTHVID_WIDTH_MAX_WIN7 1600
>> +#define SYNTHVID_HEIGHT_MAX_WIN7 1200
>> +
>> +enum pipe_msg_type {
>> + PIPE_MSG_INVALID,
>> + PIPE_MSG_DATA,
>> + PIPE_MSG_MAX
>> +};
>> +
>> +enum synthvid_msg_type {
>> + SYNTHVID_ERROR = 0,
>> + SYNTHVID_VERSION_REQUEST = 1,
>> + SYNTHVID_VERSION_RESPONSE = 2,
>> + SYNTHVID_VRAM_LOCATION = 3,
>> + SYNTHVID_VRAM_LOCATION_ACK = 4,
>> + SYNTHVID_SITUATION_UPDATE = 5,
>> + SYNTHVID_SITUATION_UPDATE_ACK = 6,
>> + SYNTHVID_POINTER_POSITION = 7,
>> + SYNTHVID_POINTER_SHAPE = 8,
>> + SYNTHVID_FEATURE_CHANGE = 9,
>> + SYNTHVID_DIRT = 10,
>> + SYNTHVID_RESOLUTION_REQUEST = 13,
>> + SYNTHVID_RESOLUTION_RESPONSE = 14,
>> +
>> + SYNTHVID_MAX = 15
>> +};
>> +
>> +struct pipe_msg_hdr {
>> + u32 type;
>> + u32 size; /* size of message after this field */
>> +} __packed;
>> +
>> +struct hvd_screen_info {
>> + u16 width;
>> + u16 height;
>> +} __packed;
>> +
>> +struct synthvid_msg_hdr {
>> + u32 type;
>> + u32 size; /* size of this header + payload after this field*/
> Add space before closing "*/"
>
> I wonder what is the difference between what is considered a message and
> what is considered payload in the above comments.
> Maybe that just because I do not know this stuff at all and the comment
> can be ignored.
>
>> +} __packed;
>> +
>> +struct synthvid_version_req {
>> + u32 version;
>> +} __packed;
>> +
>> +struct synthvid_version_resp {
>> + u32 version;
>> + u8 is_accepted;
>> + u8 max_video_outputs;
>> +} __packed;
>> +
>> +struct synthvid_vram_location {
>> + u64 user_ctx;
>> + u8 is_vram_gpa_specified;
>> + u64 vram_gpa;
>> +} __packed;
> Not an alignmnet friendly layout - but I guess the layout is fixed.
> Same goes in otther places.
>
>> +
>> +struct synthvid_vram_location_ack {
>> + u64 user_ctx;
>> +} __packed;
>> +
>> +struct video_output_situation {
>> + u8 active;
>> + u32 vram_offset;
>> + u8 depth_bits;
>> + u32 width_pixels;
>> + u32 height_pixels;
>> + u32 pitch_bytes;
>> +} __packed;
>> +
>> +struct synthvid_situation_update {
>> + u64 user_ctx;
>> + u8 video_output_count;
>> + struct video_output_situation video_output[1];
>> +} __packed;
>> +
>> +struct synthvid_situation_update_ack {
>> + u64 user_ctx;
>> +} __packed;
>> +
>> +struct synthvid_pointer_position {
>> + u8 is_visible;
>> + u8 video_output;
>> + s32 image_x;
>> + s32 image_y;
>> +} __packed;
>> +
>> +#define SYNTHVID_CURSOR_MAX_X 96
>> +#define SYNTHVID_CURSOR_MAX_Y 96
>> +#define SYNTHVID_CURSOR_ARGB_PIXEL_SIZE 4
>> +#define SYNTHVID_CURSOR_MAX_SIZE (SYNTHVID_CURSOR_MAX_X * \
>> + SYNTHVID_CURSOR_MAX_Y * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE)
>> +#define SYNTHVID_CURSOR_COMPLETE (-1)
>> +
>> +struct synthvid_pointer_shape {
>> + u8 part_idx;
>> + u8 is_argb;
>> + u32 width; /* SYNTHVID_CURSOR_MAX_X at most */
>> + u32 height; /* SYNTHVID_CURSOR_MAX_Y at most */
>> + u32 hot_x; /* hotspot relative to upper-left of pointer image */
>> + u32 hot_y;
>> + u8 data[4];
>> +} __packed;
>> +
>> +struct synthvid_feature_change {
>> + u8 is_dirt_needed;
>> + u8 is_ptr_pos_needed;
>> + u8 is_ptr_shape_needed;
>> + u8 is_situ_needed;
>> +} __packed;
>> +
>> +struct rect {
>> + s32 x1, y1; /* top left corner */
>> + s32 x2, y2; /* bottom right corner, exclusive */
>> +} __packed;
>> +
>> +struct synthvid_dirt {
>> + u8 video_output;
>> + u8 dirt_count;
>> + struct rect rect[1];
>> +} __packed;
>> +
>> +#define SYNTHVID_EDID_BLOCK_SIZE 128
>> +#define SYNTHVID_MAX_RESOLUTION_COUNT 64
>> +
>> +struct synthvid_supported_resolution_req {
>> + u8 maximum_resolution_count;
>> +} __packed;
>> +
>> +struct synthvid_supported_resolution_resp {
>> + u8 edid_block[SYNTHVID_EDID_BLOCK_SIZE];
>> + u8 resolution_count;
>> + u8 default_resolution_index;
>> + u8 is_standard;
>> + struct hvd_screen_info supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT];
>> +} __packed;
>> +
>> +struct synthvid_msg {
>> + struct pipe_msg_hdr pipe_hdr;
>> + struct synthvid_msg_hdr vid_hdr;
>> + union {
>> + struct synthvid_version_req ver_req;
>> + struct synthvid_version_resp ver_resp;
>> + struct synthvid_vram_location vram;
>> + struct synthvid_vram_location_ack vram_ack;
>> + struct synthvid_situation_update situ;
>> + struct synthvid_situation_update_ack situ_ack;
>> + struct synthvid_pointer_position ptr_pos;
>> + struct synthvid_pointer_shape ptr_shape;
>> + struct synthvid_feature_change feature_chg;
>> + struct synthvid_dirt dirt;
>> + struct synthvid_supported_resolution_req resolution_req;
>> + struct synthvid_supported_resolution_resp resolution_resp;
>> + };
>> +} __packed;
>> +
>> +static inline bool synthvid_ver_ge(u32 ver1, u32 ver2)
>> +{
>> + if (SYNTHVID_VER_GET_MAJOR(ver1) > SYNTHVID_VER_GET_MAJOR(ver2) ||
>> + (SYNTHVID_VER_GET_MAJOR(ver1) == SYNTHVID_VER_GET_MAJOR(ver2) &&
>> + SYNTHVID_VER_GET_MINOR(ver1) >= SYNTHVID_VER_GET_MINOR(ver2)))
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static inline int synthvid_send(struct hv_device *hdev,
>> + struct synthvid_msg *msg)
>> +{
>> + static atomic64_t request_id = ATOMIC64_INIT(0);
>> + int ret;
>> +
>> + msg->pipe_hdr.type = PIPE_MSG_DATA;
>> + msg->pipe_hdr.size = msg->vid_hdr.size;
>> +
>> + ret = vmbus_sendpacket(hdev->channel, msg,
>> + msg->vid_hdr.size + sizeof(struct pipe_msg_hdr),
>> + atomic64_inc_return(&request_id),
>> + VM_PKT_DATA_INBAND, 0);
>> +
>> + if (ret)
>> + DRM_ERROR("Unable to send packet via vmbus\n");
>
> Try to use drm_err() and friends, and not DRM_ERR and friends.
> DRM_ERR are no logner preferred in drivers.
> Goes for all uses of DRM_ERR and friends.
>
>> +
>> + return ret;
>> +}
>> +
>> +static int synthvid_negotiate_ver(struct hv_device *hdev, u32 ver)
>> +{
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + struct synthvid_msg *msg = (struct synthvid_msg *)hv->init_buf;
>> + unsigned long t;
>> + int ret = 0;
>> +
>> + memset(msg, 0, sizeof(struct synthvid_msg));
>> + msg->vid_hdr.type = SYNTHVID_VERSION_REQUEST;
>> + msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
>> + sizeof(struct synthvid_version_req);
>> + msg->ver_req.version = ver;
>> + synthvid_send(hdev, msg);
>> +
>> + t = wait_for_completion_timeout(&hv->wait, VMBUS_VSP_TIMEOUT);
>> + if (!t) {
>> + DRM_ERROR("Time out on waiting version response\n");
>> + ret = -ETIMEDOUT;
>> + goto out;
>> + }
>> + if (!msg->ver_resp.is_accepted) {
>> + ret = -ENODEV;
>> + goto out;
>> + }
>> +
>> + hv->synthvid_version = ver;
>> + DRM_INFO("Synthvid Version major %d, minor %d\n",
>> + SYNTHVID_VER_GET_MAJOR(ver), SYNTHVID_VER_GET_MINOR(ver));
>> +
>> +out:
>> + return ret;
>> +}
>> +
>> +/* Should be done only once during init and resume */
>> +static int synthvid_update_vram_location(struct hv_device *hdev,
>> + phys_addr_t vram_pp)
>> +{
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + struct synthvid_msg *msg = (struct synthvid_msg *)hv->init_buf;
>> + unsigned long t;
>> + int ret = 0;
>> +
>> + memset(msg, 0, sizeof(struct synthvid_msg));
>> + msg->vid_hdr.type = SYNTHVID_VRAM_LOCATION;
>> + msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
>> + sizeof(struct synthvid_vram_location);
>> + msg->vram.user_ctx = msg->vram.vram_gpa = vram_pp;
>> + msg->vram.is_vram_gpa_specified = 1;
>> + synthvid_send(hdev, msg);
>> +
>> + t = wait_for_completion_timeout(&hv->wait, VMBUS_VSP_TIMEOUT);
>> + if (!t) {
>> + DRM_ERROR("Time out on waiting vram location ack\n");
>> + ret = -ETIMEDOUT;
>> + goto out;
>> + }
>> + if (msg->vram_ack.user_ctx != vram_pp) {
>> + DRM_ERROR("Unable to set VRAM location\n");
>> + ret = -ENODEV;
>> + }
>> +
>> +out:
>> + return ret;
>> +}
>> +
>> +static int synthvid_update_situation(struct hv_device *hdev, u8 active, u32 bpp,
>> + u32 w, u32 h, u32 pitch)
>> +{
>> + struct synthvid_msg msg;
>
> Sometimes synthvid_msg is hv->init_buf.
> Sometimes a local variable.
> I wonder why there is a difference.
>
>> +
>> + memset(&msg, 0, sizeof(struct synthvid_msg));
>> +
>> + msg.vid_hdr.type = SYNTHVID_SITUATION_UPDATE;
>> + msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
>> + sizeof(struct synthvid_situation_update);
>> + msg.situ.user_ctx = 0;
>> + msg.situ.video_output_count = 1;
>> + msg.situ.video_output[0].active = active;
>> + /* vram_offset should always be 0 */
>> + msg.situ.video_output[0].vram_offset = 0;
>> + msg.situ.video_output[0].depth_bits = bpp;
>> + msg.situ.video_output[0].width_pixels = w;
>> + msg.situ.video_output[0].height_pixels = h;
>> + msg.situ.video_output[0].pitch_bytes = pitch;
>> +
>> + synthvid_send(hdev, &msg);
>> +
>> + return 0;
>> +}
>> +
>> +static int synthvid_update_dirt(struct hv_device *hdev, struct drm_rect *rect)
>> +{
>> + struct synthvid_msg msg;
>> +
>> + memset(&msg, 0, sizeof(struct synthvid_msg));
>> +
>> + msg.vid_hdr.type = SYNTHVID_DIRT;
>> + msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
>> + sizeof(struct synthvid_dirt);
>> + msg.dirt.video_output = 0;
>> + msg.dirt.dirt_count = 1;
>> + msg.dirt.rect[0].x1 = rect->x1;
>> + msg.dirt.rect[0].y1 = rect->y1;
>> + msg.dirt.rect[0].x2 = rect->x2;
>> + msg.dirt.rect[0].y2 = rect->y2;
>> +
>> + synthvid_send(hdev, &msg);
>> +
>> + return 0;
>> +}
>> +
>> +static int synthvid_get_supported_resolution(struct hv_device *hdev)
>> +{
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + struct synthvid_msg *msg = (struct synthvid_msg *)hv->init_buf;
>> + unsigned long t;
>> + int ret = 0;
>> + u8 index;
>> + int i;
>> +
>> + memset(msg, 0, sizeof(struct synthvid_msg));
>> + msg->vid_hdr.type = SYNTHVID_RESOLUTION_REQUEST;
>> + msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
>> + sizeof(struct synthvid_supported_resolution_req);
>> + msg->resolution_req.maximum_resolution_count =
>> + SYNTHVID_MAX_RESOLUTION_COUNT;
>> + synthvid_send(hdev, msg);
>> +
>> + t = wait_for_completion_timeout(&hv->wait, VMBUS_VSP_TIMEOUT);
>> + if (!t) {
>> + DRM_ERROR("Time out on waiting resolution response\n");
>> + ret = -ETIMEDOUT;
>> + goto out;
>> + }
>> +
>> + if (msg->resolution_resp.resolution_count == 0) {
>> + DRM_ERROR("No supported resolutions\n");
>> + ret = -ENODEV;
>> + goto out;
>> + }
>> +
>> + index = msg->resolution_resp.default_resolution_index;
>> + if (index >= msg->resolution_resp.resolution_count) {
>> + DRM_ERROR("Invalid resolution index: %d\n", index);
>> + ret = -ENODEV;
>> + goto out;
>> + }
>> +
>> + for (i = 0; i < msg->resolution_resp.resolution_count; i++) {
>> + hv->screen_width_max = max_t(u32, hv->screen_width_max,
>> + msg->resolution_resp.supported_resolution[i].width);
>> + hv->screen_height_max = max_t(u32, hv->screen_height_max,
>> + msg->resolution_resp.supported_resolution[i].height);
>> + }
>> +
>> + hv->preferred_width =
>> + msg->resolution_resp.supported_resolution[index].width;
>> + hv->preferred_height =
>> + msg->resolution_resp.supported_resolution[index].height;
>> +
>> +out:
>> + return ret;
>> +}
>> +
>> +/* Actions on received messages from host */
>> +static void synthvid_recv_sub(struct hv_device *hdev)
>> +{
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + struct synthvid_msg *msg;
>> +
>> + if (!hv)
>> + return;
>> +
>> + msg = (struct synthvid_msg *)hv->recv_buf;
>> +
>> + /* Complete the wait event */
>> + if (msg->vid_hdr.type == SYNTHVID_VERSION_RESPONSE ||
>> + msg->vid_hdr.type == SYNTHVID_RESOLUTION_RESPONSE ||
>> + msg->vid_hdr.type == SYNTHVID_VRAM_LOCATION_ACK) {
>> + memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE);
>> + complete(&hv->wait);
>> + return;
>> + }
>> +}
>> +
>> +static void synthvid_receive(void *ctx)
>> +{
>> + struct hv_device *hdev = ctx;
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + struct synthvid_msg *recv_buf;
>> + u32 bytes_recvd;
>> + u64 req_id;
>> + int ret;
>> +
>> + if (!hv)
>> + return;
>> +
>> + recv_buf = (struct synthvid_msg *)hv->recv_buf;
>> +
>> + do {
>> + ret = vmbus_recvpacket(hdev->channel, recv_buf,
>> + VMBUS_MAX_PACKET_SIZE,
>> + &bytes_recvd, &req_id);
>> + if (bytes_recvd > 0 &&
>> + recv_buf->pipe_hdr.type == PIPE_MSG_DATA)
>> + synthvid_recv_sub(hdev);
>> + } while (bytes_recvd > 0 && ret == 0);
>> +}
>> +
>> +static int synthvid_connect_vsp(struct hv_device *hdev)
>> +{
>> + struct hyperv_device *hv = hv_get_drvdata(hdev);
>> + int ret;
>> +
>> + ret = vmbus_open(hdev->channel, VMBUS_RING_BUFSIZE, VMBUS_RING_BUFSIZE,
>> + NULL, 0, synthvid_receive, hdev);
>> + if (ret) {
>> + DRM_ERROR("Unable to open vmbus channel\n");
>> + return ret;
>> + }
>> +
>> + /* Negotiate the protocol version with host */
>> + switch (vmbus_proto_version) {
>> + case VERSION_WIN10:
>> + case VERSION_WIN10_V5:
>> + ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN10);
>> + if (!ret)
>> + break;
>> + fallthrough;
>> + case VERSION_WIN8:
>> + case VERSION_WIN8_1:
>> + ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN8);
>> + if (!ret)
>> + break;
>> + fallthrough;
>> + case VERSION_WS2008:
>> + case VERSION_WIN7:
>> + ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN7);
>> + break;
>> + default:
>> + ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN10);
>> + break;
>> + }
>> +
>> + if (ret) {
>> + DRM_ERROR("Synthetic video device version not accepted\n");
> Print error code?
>
>> + goto error;
>> + }
>> +
>> + if (hv->synthvid_version == SYNTHVID_VERSION_WIN7)
>> + hv->screen_depth = SYNTHVID_DEPTH_WIN7;
>> + else
>> + hv->screen_depth = SYNTHVID_DEPTH_WIN8;
>> +
>> + if (synthvid_ver_ge(hv->synthvid_version, SYNTHVID_VERSION_WIN10)) {
>> + ret = synthvid_get_supported_resolution(hdev);
>> + if (ret)
>> + DRM_ERROR("Failed to get supported resolution from host, use default\n");
>> + } else {
>> + hv->screen_width_max = SYNTHVID_WIDTH_MAX_WIN7;
>> + hv->screen_height_max = SYNTHVID_HEIGHT_MAX_WIN7;
>> + }
>> +
>> + hv->mmio_megabytes = hdev->channel->offermsg.offer.mmio_megabytes;
>> +
>> + return 0;
>> +
>> +error:
>> + vmbus_close(hdev->channel);
>> + return ret;
>> +}
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* VRAM blit */
>> +
>> +static int hyperv_blit_to_vram_rect(struct drm_framebuffer *fb,
>> + struct drm_rect *rect)
>> +{
>> + struct hyperv_device *hv = to_hv(fb->dev);
>> + void *vmap;
>> + int idx, ret;
>> +
>> + ret = -ENODEV;
>> + if (!drm_dev_enter(&hv->dev, &idx))
>> + goto out;
Return -ENODEV directly.
>> +
>> + ret = -ENOMEM;
>> + vmap = drm_gem_shmem_vmap(fb->obj[0]);
>> + if (!vmap)
>> + goto out_dev_exit;
>> +
>> + drm_fb_memcpy_dstclip(hv->vram, vmap, fb, rect);
>> + drm_gem_shmem_vunmap(fb->obj[0], vmap);
>> + ret = 0;
>> +
>> +out_dev_exit:
>> + drm_dev_exit(idx);
>> +out:
>> + return ret;
IMHO rather separate regular cleanups from error rollbacks. Handling
both in the same code is hard to read and usually not worth the amount
of saved LOCs.
>> +}
>> +
>> +static int hyperv_blit_to_vram_fullscreen(struct drm_framebuffer *fb)
>> +{
>> + struct drm_rect fullscreen = {
>> + .x1 = 0,
>> + .x2 = fb->width,
>> + .y1 = 0,
>> + .y2 = fb->height,
>> + };
>> + return hyperv_blit_to_vram_rect(fb, &fullscreen);
>> +}
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* connector */
>> +
>> +static int hyperv_connector_get_modes(struct drm_connector *connector)
>> +{
>> + struct hyperv_device *hv = to_hv(connector->dev);
>> + int count;
>> +
>> + count = drm_add_modes_noedid(connector,
>> + connector->dev->mode_config.max_width,
>> + connector->dev->mode_config.max_height);
>> + drm_set_preferred_mode(connector, hv->preferred_width,
>> + hv->preferred_height);
>> +
>> + return count;
>> +}
>> +
>> +static const struct drm_connector_helper_funcs hyperv_connector_helper_funcs = {
>> + .get_modes = hyperv_connector_get_modes,
>> +};
>> +
>> +static const struct drm_connector_funcs hyperv_connector_funcs = {
>> + .fill_modes = drm_helper_probe_single_connector_modes,
>> + .destroy = drm_connector_cleanup,
>> + .reset = drm_atomic_helper_connector_reset,
>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int hyperv_conn_init(struct hyperv_device *hv)
>> +{
>> + drm_connector_helper_add(&hv->connector, &hyperv_connector_helper_funcs);
>> + return drm_connector_init(&hv->dev, &hv->connector,
>> + &hyperv_connector_funcs,
>> + DRM_MODE_CONNECTOR_VGA);
>> +
>> +}
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* display pipe */
>> +
>> +static int hyperv_check_size(struct hyperv_device *hv, int w, int h,
>> + struct drm_framebuffer *fb)
>> +{
>> + u32 pitch = w * (hv->screen_depth/8);
>> +
>> + if (fb)
>> + pitch = fb->pitches[0];
>> +
>> + if (pitch * h > hv->fb_size)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static enum drm_mode_status
>> +hyperv_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
>> + const struct drm_display_mode *mode)
>> +{
>> + struct hyperv_device *hv = to_hv(pipe->crtc.dev);
>> +
>> + if (hyperv_check_size(hv, mode->hdisplay, mode->vdisplay, NULL))
>> + return MODE_BAD;
>> +
>> + return MODE_OK;
>> +}
>> +
>> +static void hyperv_pipe_enable(struct drm_simple_display_pipe *pipe,
>> + struct drm_crtc_state *crtc_state,
>> + struct drm_plane_state *plane_state)
>> +{
>> + struct hyperv_device *hv = to_hv(pipe->crtc.dev);
>> +
>> + synthvid_update_situation(hv->hdev, 1, hv->screen_depth,
>> + crtc_state->mode.hdisplay,
>> + crtc_state->mode.vdisplay,
>> + plane_state->fb->pitches[0]);
>> + hyperv_blit_to_vram_fullscreen(plane_state->fb);
>> +}
>> +
>> +static void hyperv_pipe_update(struct drm_simple_display_pipe *pipe,
>> + struct drm_plane_state *old_state)
>> +{
>> + struct hyperv_device *hv = to_hv(pipe->crtc.dev);
>> + struct drm_plane_state *state = pipe->plane.state;
>> + struct drm_rect rect;
>> +
>> + if (drm_atomic_helper_damage_merged(old_state, state, &rect)) {
>> + hyperv_blit_to_vram_rect(state->fb, &rect);
>> + synthvid_update_dirt(hv->hdev, &rect);
>> + }
>> +}
>> +
>> +static const struct drm_simple_display_pipe_funcs hyperv_pipe_funcs = {
>> + .mode_valid = hyperv_pipe_mode_valid,
>> + .enable = hyperv_pipe_enable,
>> + .update = hyperv_pipe_update,
>> +};
>> +
>> +static const uint32_t hyperv_formats[] = {
>> + DRM_FORMAT_XRGB8888,
>> +};
>> +
>> +static const uint64_t hyperv_modifiers[] = {
>> + DRM_FORMAT_MOD_LINEAR,
>> + DRM_FORMAT_MOD_INVALID
>> +};
>> +
>> +static int hyperv_pipe_init(struct hyperv_device *hv)
>> +{
>> + int ret;
>> +
>> + ret = drm_simple_display_pipe_init(&hv->dev,
>> + &hv->pipe,
>> + &hyperv_pipe_funcs,
>> + hyperv_formats,
>> + ARRAY_SIZE(hyperv_formats),
>> + NULL,
>> + &hv->connector);
>> +
>> + drm_plane_enable_fb_damage_clips(&(hv->pipe.plane));
>> +
>> + return ret;
>> +}
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* framebuffers & mode config */
>> +
>> +static struct drm_framebuffer*
>> +hyperv_fb_create(struct drm_device *dev, struct drm_file *file_priv,
>> + const struct drm_mode_fb_cmd2 *mode_cmd)
>> +{
>> + struct hyperv_device *hv = to_hv(dev);
>> +
>> + if (mode_cmd->pixel_format != DRM_FORMAT_XRGB8888)
>> + return ERR_PTR(-EINVAL);
>> +
>> + if (mode_cmd->pitches[0] * mode_cmd->height > hv->fb_size)
>> + return ERR_PTR(-EINVAL);
>> +
>> + return drm_gem_fb_create_with_dirty(dev, file_priv, mode_cmd);
>> +}
>> +
>> +static const struct drm_mode_config_funcs hyperv_mode_config_funcs = {
>> + .fb_create = hyperv_fb_create,
>> + .atomic_check = drm_atomic_helper_check,
>> + .atomic_commit = drm_atomic_helper_commit,
>> +};
>> +
>> +static int hyperv_mode_config_init(struct hyperv_device *hv)
>> +{
>> + struct drm_device *dev = &hv->dev;
>> + int ret;
>> +
>> + ret = drmm_mode_config_init(dev);
>> + if (ret)
>> + return ret;
>> +
>> + dev->mode_config.min_width = 0;
>> + dev->mode_config.min_height = 0;
>> + dev->mode_config.max_width = hv->screen_width_max;
>> + dev->mode_config.max_height = hv->screen_height_max;
>> +
>> + dev->mode_config.preferred_depth = hv->screen_depth;
>> + dev->mode_config.prefer_shadow = 0;
>> +
>> + dev->mode_config.funcs = &hyperv_mode_config_funcs;
>> +
>> + return 0;
>> +}
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* DRM */
>> +
>> +DEFINE_DRM_GEM_FOPS(hv_fops);
>> +
>> +static struct drm_driver hyperv_driver = {
>> + .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
>> +
>> + .name = DRIVER_NAME,
>> + .desc = DRIVER_DESC,
>> + .date = DRIVER_DATE,
>> + .major = DRIVER_MAJOR,
>> + .minor = DRIVER_MINOR,
>> +
>> + .fops = &hv_fops,
>> + DRM_GEM_SHMEM_DRIVER_OPS,
>> +};
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* pci/vmbus interface */
>> +
>> +static int hyperv_pci_probe(struct pci_dev *pdev,
>> + const struct pci_device_id *ent)
>> +{
>> + return 0;
>> +}
>> +
>> +static void hyperv_pci_remove(struct pci_dev *pdev)
>> +{
>> +}
>> +
>> +static const struct pci_device_id hyperv_pci_tbl[] = {
>> + {
>> + .vendor = PCI_VENDOR_ID_MICROSOFT,
>> + .device = PCI_DEVICE_ID_HYPERV_VIDEO,
>> + },
>> + { /* end of list */ }
>> +};
>> +
>> +static struct pci_driver hyperv_pci_driver = {
>> + .name = KBUILD_MODNAME,
>> + .id_table = hyperv_pci_tbl,
>> + .probe = hyperv_pci_probe,
>> + .remove = hyperv_pci_remove,
>> +};
>> +
>> +static int hyperv_vmbus_probe(struct hv_device *hdev,
>> + const struct hv_vmbus_device_id *dev_id)
>> +{
>> + struct hyperv_device *hv;
>> + struct drm_device *dev;
>> + struct pci_dev *pdev;
>> + int ret;
>> +
>> + hv = devm_drm_dev_alloc(&hdev->device, &hyperv_driver,
>> + struct hyperv_device, dev);
>> + if (IS_ERR(hv))
>> + return PTR_ERR(hv);
>> +
>> + dev = &hv->dev;
>> + init_completion(&hv->wait);
>> + hv_set_drvdata(hdev, hv);
>> + hv->hdev = hdev;
>> +
>> + pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
>> + PCI_DEVICE_ID_HYPERV_VIDEO, NULL);
>> + if (!pdev) {
>> + DRM_ERROR("Unable to find PCI Hyper-V video\n");
>> + return -ENODEV;
>> + }
>> +
>> + ret = drm_fb_helper_remove_conflicting_pci_framebuffers(pdev, "hypervdrmfb");
>> + if (ret) {
>> + DRM_ERROR("Not able to remove boot fb\n");
>> + goto error;
>> + }
>> +
>> + if (pci_request_region(pdev, 0, DRIVER_NAME) != 0)
>> + DRM_WARN("Cannot request framebuffer, boot fb still active?\n");
> devm variant?
>
>> +
>> + if ((pdev->resource[0].flags & IORESOURCE_MEM) == 0) {
>> + DRM_ERROR("Resource at bar 0 is not IORESOURCE_MEM\n");
>> + ret = -ENODEV;
>> + goto error;
>> + }
>> +
>> + hv->fb_base = pci_resource_start(pdev, 0);
>> + hv->fb_size = pci_resource_len(pdev, 0);
>> + if (hv->fb_base == 0) {
>> + DRM_ERROR("Resource not available\n");
>> + ret = -ENODEV;
>> + goto error;
>> + }
>> +
>> + /* Get the actual VRAM size from the device */
>> + ret = synthvid_connect_vsp(hdev);
>> + if (ret) {
>> + DRM_ERROR("Failed to connect to vmbus\n");
>> + goto error;
>> + }
>> +
>> + hv->fb_size = min(hv->fb_size,
>> + (unsigned long)(hv->mmio_megabytes * 1024 * 1024));
>> + hv->vram = devm_ioremap(&pdev->dev, hv->fb_base, hv->fb_size);
>> + if (hv->vram == NULL) {
>> + DRM_ERROR("Failed to map vram\n");
>> + ret = -ENOMEM;
>> + goto error1;
>> + }
>> +
>> + /*
>> + * Failing to update vram location is not fatal. Device will update
>> + * dirty area till preferred resolution only.
>> + */
>> + ret = synthvid_update_vram_location(hdev, hv->fb_base);
>> + if (ret)
>> + DRM_WARN("Failed to update vram location.\n");
I'd put the memory initialization, beginning at
"pci_request_region(pdev, 0, DRIVER_NAME)", into a separate function.
>> +
>> + ret = hyperv_mode_config_init(hv);
>> + if (ret) {
>> + DRM_ERROR("Failed to initialized mode setting\n");
>> + goto error1;
>> + }
>> +
>> + ret = hyperv_conn_init(hv);
>> + if (ret) {
>> + DRM_ERROR("Failed to initialized connector\n");
>> + goto error1;
>> + }
>> +
>> + ret = hyperv_pipe_init(hv);
>> + if (ret) {
>> + DRM_ERROR("Failed to initialized pipe\n");
>> + goto error1;
>> + }
>> +
>> + drm_mode_config_reset(dev);
The code up to here could go into hyperv_mode_config_init().
>> +
>> + ret = drm_dev_register(dev, 0);
>> + if (ret) {
>> + DRM_ERROR("Failed to register drm driver\n");
>> + goto error1;
>> + }
>> +
>> + drm_fbdev_generic_setup(dev, dev->mode_config.preferred_depth);
Simply pass 0 as final argument. The helper will use the preferred depth
automatically.
>> +
>> + pci_dev_put(pdev);
>> + return 0;
>> +
>> +error1:
>> + vmbus_close(hdev->channel);
>> +error:
There lables are badly named. Rather use err_vmbus_close and
err_hv_set_drv_data.
Best regards
Thomas
>> + hv_set_drvdata(hdev, NULL);
>> + pci_dev_put(pdev);
>> + return ret;
>> +}
>> +
>> +static int hyperv_vmbus_remove(struct hv_device *hdev)
>> +{
>> + struct drm_device *dev = hv_get_drvdata(hdev);
>> +
>> + drm_dev_unplug(dev);
>> + drm_atomic_helper_shutdown(dev);
>> + vmbus_close(hdev->channel);
>> + hv_set_drvdata(hdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +static int hyperv_vmbus_suspend(struct hv_device *hdev)
>> +{
>> + struct drm_device *dev = hv_get_drvdata(hdev);
>> + int ret;
>> +
>> + ret = drm_mode_config_helper_suspend(dev);
>> +
>> + vmbus_close(hdev->channel);
>> +
>> + return ret;
>> +}
>> +
>> +static int hyperv_vmbus_resume(struct hv_device *hdev)
>> +{
>> + struct drm_device *dev = hv_get_drvdata(hdev);
>> + int ret;
>> +
>> + ret = synthvid_connect_vsp(hdev);
>> + if (ret)
>> + return ret;
>> +
>> + return drm_mode_config_helper_resume(dev);
>> +}
>> +
>> +static const struct hv_vmbus_device_id hyperv_vmbus_tbl[] = {
>> + /* Synthetic Video Device GUID */
>> + {HV_SYNTHVID_GUID},
>> + {}
>> +};
>> +
>> +static struct hv_driver hyperv_hv_driver = {
>> + .name = KBUILD_MODNAME,
>> + .id_table = hyperv_vmbus_tbl,
>> + .probe = hyperv_vmbus_probe,
>> + .remove = hyperv_vmbus_remove,
>> + .suspend = hyperv_vmbus_suspend,
>> + .resume = hyperv_vmbus_resume,
>> + .driver = {
>> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
>> + },
>> +};
>> +
>> +/* ---------------------------------------------------------------------- */
>> +/* module init/exit */
>> +
>> +static int __init hyperv_init(void)
>> +{
>> + int ret;
>> +
>> + ret = pci_register_driver(&hyperv_pci_driver);
>> + if (ret != 0) {
>> + DRM_ERROR("Failed to register pci driver\n");
>> + return ret;
>> + }
>> +
>> + ret = vmbus_driver_register(&hyperv_hv_driver);
>> + if (ret != 0)
>> + DRM_ERROR("Failed to register vmbus driver\n");
>> +
>> + return ret;
>> +}
>> +
>> +static void __exit hyperv_exit(void)
>> +{
>> + vmbus_driver_unregister(&hyperv_hv_driver);
>> + pci_unregister_driver(&hyperv_pci_driver);
>> +}
>> +
>> +module_init(hyperv_init);
>> +module_exit(hyperv_exit);
>> +
>> +MODULE_DEVICE_TABLE(pci, hyperv_pci_tbl);
>> +MODULE_DEVICE_TABLE(vmbus, hyperv_vmbus_tbl);
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Deepak Rawat <drawat.floss at gmail.com>");
>> +MODULE_DESCRIPTION("DRM driver for hyperv synthetic video device");
>> --
>> 2.27.0
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20200623/b821d201/attachment-0001.sig>
More information about the dri-devel
mailing list