[RESEND PATCH v5 4/5] drm/bridge/sii8620: fix resource acquisition error handling

[Andrzej Hajda]

In case of error during resource acquisition driver should print error
message only in case it is not deferred probe, using probe_err helper
solves the issue. Moreover it records defer probe reason for debugging.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 drivers/gpu/drm/bridge/sil-sii8620.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 92acd336aa89..2f825b2d0098 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -2299,10 +2299,8 @@ static int sii8620_probe(struct i2c_client *client,
 	INIT_LIST_HEAD(&ctx->mt_queue);
 
 	ctx->clk_xtal = devm_clk_get(dev, "xtal");
-	if (IS_ERR(ctx->clk_xtal)) {
-		dev_err(dev, "failed to get xtal clock from DT\n");
-		return PTR_ERR(ctx->clk_xtal);
-	}
+	if (IS_ERR(ctx->clk_xtal))
+		return probe_err(dev, ctx->clk_xtal, "failed to get xtal clock from DT\n");
 
 	if (!client->irq) {
 		dev_err(dev, "no irq provided\n");
@@ -2313,16 +2311,12 @@ static int sii8620_probe(struct i2c_client *client,
 					sii8620_irq_thread,
 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 					"sii8620", ctx);
-	if (ret < 0) {
-		dev_err(dev, "failed to install IRQ handler\n");
-		return ret;
-	}
+	if (ret < 0)
+		return probe_err(dev, ret, "failed to install IRQ handler\n");
 
 	ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
-	if (IS_ERR(ctx->gpio_reset)) {
-		dev_err(dev, "failed to get reset gpio from DT\n");
-		return PTR_ERR(ctx->gpio_reset);
-	}
+	if (IS_ERR(ctx->gpio_reset))
+		return probe_err(dev, ctx->gpio_reset, "failed to get reset gpio from DT\n");
 
 	ctx->supplies[0].supply = "cvcc10";
 	ctx->supplies[1].supply = "iovcc18";
-- 
2.17.1