[PATCH v2 3/3] Revert "drm/amd/display: Expose connector VRR range via debugfs"

Manasi Navare manasi.d.navare at intel.com
Wed Jun 24 22:48:30 UTC 2020


From: Bhanuprakash Modem <bhanuprakash.modem at intel.com>

v2:
* Rebase (Manasi)

As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.

Hence this logic should move to core DRM.

This reverts commit 727962f030c23422a01e8b22d0f463815fb15ec4.

Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Cc: Harry Wentland <harry.wentland at amd.com>
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Cc: AMD gfx <amd-gfx at lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 20 -------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 076af267b488..71387d2af2ed 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -820,24 +820,6 @@ static int output_bpc_show(struct seq_file *m, void *data)
 	return res;
 }
 
-/*
- * Returns the min and max vrr vfreq through the connector's debugfs file.
- * Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
- */
-static int vrr_range_show(struct seq_file *m, void *data)
-{
-	struct drm_connector *connector = m->private;
-	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
-
-	if (connector->status != connector_status_connected)
-		return -ENODEV;
-
-	seq_printf(m, "Min: %u\n", (unsigned int)aconnector->min_vfreq);
-	seq_printf(m, "Max: %u\n", (unsigned int)aconnector->max_vfreq);
-
-	return 0;
-}
-
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 /*
  * Returns the HDCP capability of the Display (1.4 for now).
@@ -1001,7 +983,6 @@ static ssize_t dp_dpcd_data_read(struct file *f, char __user *buf,
 DEFINE_SHOW_ATTRIBUTE(dmub_fw_state);
 DEFINE_SHOW_ATTRIBUTE(dmub_tracebuffer);
 DEFINE_SHOW_ATTRIBUTE(output_bpc);
-DEFINE_SHOW_ATTRIBUTE(vrr_range);
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 DEFINE_SHOW_ATTRIBUTE(hdcp_sink_capability);
 #endif
@@ -1059,7 +1040,6 @@ static const struct {
 		{"phy_settings", &dp_phy_settings_debugfs_fop},
 		{"test_pattern", &dp_phy_test_pattern_fops},
 		{"output_bpc", &output_bpc_fops},
-		{"vrr_range", &vrr_range_fops},
 #ifdef CONFIG_DRM_AMD_DC_HDCP
 		{"hdcp_sink_capability", &hdcp_sink_capability_fops},
 #endif
-- 
2.19.1



More information about the dri-devel mailing list