[PATCHv1 1/4] dt-bindings: display: panel-dsi-cm: convert to YAML

[Sebastian Reichel]

Convert panel-dsi-cm bindings to YAML and add
missing properties while at it.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 .../bindings/display/panel/panel-dsi-cm.txt   |  29 -----
 .../bindings/display/panel/panel-dsi-cm.yaml  | 100 ++++++++++++++++++
 2 files changed, 100 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
deleted file mode 100644
index dce48eb9db57..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Generic MIPI DSI Command Mode Panel
-===================================
-
-Required properties:
-- compatible: "panel-dsi-cm"
-
-Optional properties:
-- label: a symbolic name for the panel
-- reset-gpios: panel reset gpio
-- te-gpios: panel TE gpio
-
-Required nodes:
-- Video port for DSI input
-
-Example
--------
-
-lcd0: display {
-	compatible = "tpo,taal", "panel-dsi-cm";
-	label = "lcd0";
-
-	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-
-	port {
-		lcd0_in: endpoint {
-			remote-endpoint = <&dsi1_out_ep>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 000000000000..8d6a20f26470
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen at ti.com>
+  - Sebastian Reichel <sre at kernel.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  are usually driven in command mode. If no backlight is
+  referenced via the optional backlight property, the DSI
+  panel is assumed to have native backlight support.
+  The panel may use an OF graph binding for the association
+  to the display, or it may be a direct child node of the
+  display.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    items:
+      - enum:
+        - motorola,droid4-panel        # Panel from Motorola Droid4 phone
+        - nokia,himalaya               # Panel from Nokia N950 phone
+        - tpo,taal                     # Panel from OMAP4 SDP board
+      - const: panel-dsi-cm            # Generic DSI command mode panel compatible fallback
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the vddi-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  vpnl-supply:
+    description:
+      When the display panel needs a second power supply, this property can be
+      used in addition to vddi-supply. Both supplies will be enabled at the
+      same time before the panel is being accessed.
+
+  width-mm: true
+  height-mm: true
+  label: true
+  rotation: true
+  panel-timing: true
+  port: true
+  reset-gpios: true
+  te-gpios: true
+  backlight: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - port
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      port {
+        dsi1_out_ep: endpoint {
+          remote-endpoint = <&lcd0_in>;
+          lanes = <0 1 2 3 4 5>;
+        };
+      };
+
+      panel at 0 {
+        compatible = "tpo,taal", "panel-dsi-cm";
+        label = "lcd0";
+        reg = <0>;
+        reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+        port {
+          lcd0_in: endpoint {
+            remote-endpoint = <&dsi1_out_ep>;
+          };
+        };
+      };
+
+    };
-- 
2.27.0