[PATCH 28/33] drm/panel-simple: Fix dotclock for Sharp LQ150X1LG11

[Peter Rosin]

On 2020-03-02 21:34, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> The currently listed dotclock disagrees with the currently
> listed vrefresh rate. Change the dotclock to match the vrefresh.
> 
> Someone tell me which (if either) of the dotclock or vreresh is
> correct?

TL/DR; I do not care if you change the refresh rate or the dotclock.

The whole entry for that panel in simple-panel is dubious. The panel
is really an LVDS panel (capable of both VESA/Jeida RGB888, selectable
with the SELLVDS pin).  With Jeida you can, as usual, omit the 4th
data channel and use the panel with RGB666. In either case, you need
an LVDS signal and nothing else...

The panel can also rotate the picture 180 degrees using the RL/UD pin.

These options are of course not expressed in the simple panel driver
(and we have always used fixed signals for those pins in our designs,
IIRC). As far as I'm concerned, the panel can be removed from
simple-panel. Our device trees are nowadays correctly expressing the
hardware with an LVDS encoder between the RGB output and the panel
and points to the panel-lvds driver for the panel.

The reason that it is as it is, is that we obviously didn't understand
what we were doing when we added the entry, and this garbage was what
we came up with that produced a picture.

If you want to keep the panel in simple-panel despite all this, the
timing constraints are as follows:

Pixel clock         50-80 MHz,        65 MHz typical
Horizontal period 1094-1720 clocks, 1344 typical
                  16.0-23.4 us      20.7 us
Horizontal enable    1024 clocks, always
Vertical period    776-990 lines,    806 typical
                  13.3-18.0 ms      16.7 ms
Vertical enable       768 lines,  always

Using a "long" (the datasheet is not very specific on this issue) vertical
period may introduce deterioration of display quality, flicker etc.

I don't think the division between front-porch/back-porch matters much.

That said, I have no idea whatsoever if others have started using this
panel entry. My guess is that it has zero users, but who can tell?

Cheers,
Peter

> Cc: Gustaf Lindström <gl at axentia.se>
> Cc: Peter Rosin <peda at axentia.se>
> Cc: Thierry Reding <treding at nvidia.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 7526af2d6d95..cb587de8c49e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -3026,7 +3026,7 @@ static const struct panel_desc sharp_lq123p1jx31 = {
>  };
>  
>  static const struct drm_display_mode sharp_lq150x1lg11_mode = {
> -	.clock = 71100,
> +	.clock = 65722,
>  	.hdisplay = 1024,
>  	.hsync_start = 1024 + 168,
>  	.hsync_end = 1024 + 168 + 64,
>