[PATCH 3/3] bus: ti-sysc: Implement display subsystem reset quirk

[Tomi Valkeinen]

On 03/03/2020 17:49, Tony Lindgren wrote:
> * Tony Lindgren <tony at atomide.com> [200303 15:14]:
>> * Tomi Valkeinen <tomi.valkeinen at ti.com> [200303 06:03]:
>>> On 24/02/2020 21:12, Tony Lindgren wrote:
>>>> +	if (sysc_soc->soc == SOC_3430) {
>>>> +		/* Clear DSS_SDI_CONTROL */
>>>> +		sysc_write(ddata, dispc_offset + 0x44, 0);
>>>> +
>>>> +		/* Clear DSS_PLL_CONTROL */
>>>> +		sysc_write(ddata, dispc_offset + 0x48, 0);
>>>
>>> These are not dispc registers, but dss registers.
>>
>> Ouch. Thanks for catching this, will include in the fix.
>>
>>>> +	}
>>>> +
>>>> +	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
>>>> +	sysc_write(ddata, dispc_offset + 0x40, 0);
>>>
>>> Same here.
> 
> Below is a fix using dispc offset for dss registers.
> 
> Regards,
> 
> Tony
> 
> 8< ----------------------
>  From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony at atomide.com>
> Date: Tue, 3 Mar 2020 07:17:43 -0800
> Subject: [PATCH] bus: ti-sysc: Fix wrong offset for display subsystem
>   reset quirk
> 
> Commit 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset
> quirk") added support for DSS reset, but is using dispc offset also for
> DSS also registers as reported by Tomi Valkeinen <tomi.valkeinen at ti.com>.
> Also, we're not using dispc_offset for dispc IRQSTATUS register so let's
> fix that too.
> 
> Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
> Reported-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
>   drivers/bus/ti-sysc.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
> --- a/drivers/bus/ti-sysc.c
> +++ b/drivers/bus/ti-sysc.c
> @@ -1566,7 +1566,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
>   		return;
>   
>   	/* Clear IRQSTATUS */
> -	sysc_write(ddata, 0x1000 + 0x18, irq_mask);
> +	sysc_write(ddata, dispc_offset + 0x18, irq_mask);
>   
>   	/* Disable outputs */
>   	val = sysc_quirk_dispc(ddata, dispc_offset, true);
> @@ -1580,14 +1580,14 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
>   
>   	if (sysc_soc->soc == SOC_3430) {
>   		/* Clear DSS_SDI_CONTROL */
> -		sysc_write(ddata, dispc_offset + 0x44, 0);
> +		sysc_write(ddata, 0x44, 0);
>   
>   		/* Clear DSS_PLL_CONTROL */
> -		sysc_write(ddata, dispc_offset + 0x48, 0);
> +		sysc_write(ddata, 0x48, 0);
>   	}
>   
>   	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
> -	sysc_write(ddata, dispc_offset + 0x40, 0);
> +	sysc_write(ddata, 0x40, 0);
>   }
>   
>   /* 1-wire needs module's internal clocks enabled for reset */
> 

Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>

  Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki