[PATCH] drm: panel: Set connector type for OrtusTech COM43H4M85ULC panel

[Sam Ravnborg]

Hi Laurent.

On Mon, Mar 09, 2020 at 08:42:10PM +0200, Laurent Pinchart wrote:
> The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type
> accordingly.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

I assume you will apply to drm-misc-next - OK?

	Sam


> ---
>  drivers/gpu/drm/panel/panel-simple.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index e14c14ac62b5..145ee05dcacd 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2439,6 +2439,7 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
>  	},
>  	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
>  	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
> +	.connector_type = DRM_MODE_CONNECTOR_DPI,
>  };
>  
>  static const struct drm_display_mode osddisplays_osd070t1718_19ts_mode  = {
> -- 
> Regards,
> 
> Laurent Pinchart