[PATCH v13 6/6] drm/mediatek: set dpi pin mode to gpio low to avoid leakage current
Chun-Kuang Hu
chunkuang.hu at kernel.org
Wed Mar 11 13:45:43 UTC 2020
Jitao Shi <jitao.shi at mediatek.com> 於 2020年3月11日 週三 下午3:19寫道:
> Config dpi pins mode to output and pull low when dpi is disabled.
> Aovid leakage current from some dpi pins (Hsync Vsync DE ... ).
>
>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 31 ++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 2871e68e7767..b6359e979588 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -10,7 +10,9 @@
> #include <linux/kernel.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> #include <linux/of_graph.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/types.h>
>
> @@ -74,6 +76,9 @@ struct mtk_dpi {
> enum mtk_dpi_out_yc_map yc_map;
> enum mtk_dpi_out_bit_num bit_num;
> enum mtk_dpi_out_channel_swap channel_swap;
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *pins_gpio;
> + struct pinctrl_state *pins_dpi;
> int refcount;
> u32 pclk_sample;
> };
> @@ -387,6 +392,9 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
> if (--dpi->refcount != 0)
> return;
>
> + if (dpi->pinctrl && dpi->pins_gpio)
> + pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
> +
> mtk_dpi_disable(dpi);
> clk_disable_unprepare(dpi->pixel_clk);
> clk_disable_unprepare(dpi->engine_clk);
> @@ -411,6 +419,9 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> goto err_pixel;
> }
>
> + if (dpi->pinctrl && dpi->pins_dpi)
> + pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
> +
> mtk_dpi_enable(dpi);
> return 0;
>
> @@ -728,6 +739,26 @@ static int mtk_dpi_probe(struct platform_device *pdev)
> of_property_read_u32(ep, "pclk-sample", &dpi->pclk_sample);
> of_node_put(ep);
>
> + dpi->pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (IS_ERR(dpi->pinctrl)) {
> + dpi->pinctrl = NULL;
> + dev_dbg(&pdev->dev, "Cannot find pinctrl!\n");
> + }
> + if (dpi->pinctrl) {
> + dpi->pins_gpio = pinctrl_lookup_state(dpi->pinctrl,
> "sleep");
> + if (IS_ERR(dpi->pins_gpio)) {
> + dpi->pins_gpio = NULL;
> + dev_dbg(&pdev->dev, "Cannot find pinctrl idle!\n");
> + }
> + if (dpi->pins_gpio)
> + pinctrl_select_state(dpi->pinctrl, dpi->pins_gpio);
> +
> + dpi->pins_dpi = pinctrl_lookup_state(dpi->pinctrl,
> "default");
> + if (IS_ERR(dpi->pins_dpi)) {
> + dpi->pins_dpi = NULL;
> + dev_dbg(&pdev->dev, "Cannot find pinctrl
> active!\n");
> + }
> + }
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> dpi->regs = devm_ioremap_resource(dev, mem);
> if (IS_ERR(dpi->regs)) {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20200311/b51c4686/attachment-0001.htm>
More information about the dri-devel
mailing list