[PATCH] omapfb: Remove unused writeback code
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Fri Mar 20 13:43:00 UTC 2020
On 3/13/20 1:24 PM, Tomi Valkeinen wrote:
> Remove unused writeback code. This code will never be used, as omapfb is
> being deprecated.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Patch queued for v5.7, thanks.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> drivers/video/fbdev/omap2/omapfb/dss/dispc.c | 114 -------------------
> drivers/video/fbdev/omap2/omapfb/dss/dss.h | 20 ----
> 2 files changed, 134 deletions(-)
>
> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
> index ce37da85cc45..4a16798b2ecd 100644
> --- a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
> @@ -557,11 +557,6 @@ u32 dispc_mgr_get_sync_lost_irq(enum omap_channel channel)
> }
> EXPORT_SYMBOL(dispc_mgr_get_sync_lost_irq);
>
> -u32 dispc_wb_get_framedone_irq(void)
> -{
> - return DISPC_IRQ_FRAMEDONEWB;
> -}
> -
> bool dispc_mgr_go_busy(enum omap_channel channel)
> {
> return mgr_fld_read(channel, DISPC_MGR_FLD_GO) == 1;
> @@ -579,30 +574,6 @@ void dispc_mgr_go(enum omap_channel channel)
> }
> EXPORT_SYMBOL(dispc_mgr_go);
>
> -bool dispc_wb_go_busy(void)
> -{
> - return REG_GET(DISPC_CONTROL2, 6, 6) == 1;
> -}
> -
> -void dispc_wb_go(void)
> -{
> - enum omap_plane plane = OMAP_DSS_WB;
> - bool enable, go;
> -
> - enable = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0) == 1;
> -
> - if (!enable)
> - return;
> -
> - go = REG_GET(DISPC_CONTROL2, 6, 6) == 1;
> - if (go) {
> - DSSERR("GO bit not down for WB\n");
> - return;
> - }
> -
> - REG_FLD_MOD(DISPC_CONTROL2, 1, 6, 6);
> -}
> -
> static void dispc_ovl_write_firh_reg(enum omap_plane plane, int reg, u32 value)
> {
> dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value);
> @@ -1028,13 +999,6 @@ static enum omap_channel dispc_ovl_get_channel_out(enum omap_plane plane)
> }
> }
>
> -void dispc_wb_set_channel_in(enum dss_writeback_channel channel)
> -{
> - enum omap_plane plane = OMAP_DSS_WB;
> -
> - REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), channel, 18, 16);
> -}
> -
> static void dispc_ovl_set_burst_size(enum omap_plane plane,
> enum omap_burst_size burst_size)
> {
> @@ -2805,74 +2769,6 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
> }
> EXPORT_SYMBOL(dispc_ovl_setup);
>
> -int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
> - bool mem_to_mem, const struct omap_video_timings *mgr_timings)
> -{
> - int r;
> - u32 l;
> - enum omap_plane plane = OMAP_DSS_WB;
> - const int pos_x = 0, pos_y = 0;
> - const u8 zorder = 0, global_alpha = 0;
> - const bool replication = false;
> - bool truncation;
> - int in_width = mgr_timings->x_res;
> - int in_height = mgr_timings->y_res;
> - enum omap_overlay_caps caps =
> - OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA;
> -
> - DSSDBG("dispc_wb_setup, pa %x, pa_uv %x, %d,%d -> %dx%d, cmode %x, "
> - "rot %d, mir %d\n", wi->paddr, wi->p_uv_addr, in_width,
> - in_height, wi->width, wi->height, wi->color_mode, wi->rotation,
> - wi->mirror);
> -
> - r = dispc_ovl_setup_common(plane, caps, wi->paddr, wi->p_uv_addr,
> - wi->buf_width, pos_x, pos_y, in_width, in_height, wi->width,
> - wi->height, wi->color_mode, wi->rotation, wi->mirror, zorder,
> - wi->pre_mult_alpha, global_alpha, wi->rotation_type,
> - replication, mgr_timings, mem_to_mem);
> -
> - switch (wi->color_mode) {
> - case OMAP_DSS_COLOR_RGB16:
> - case OMAP_DSS_COLOR_RGB24P:
> - case OMAP_DSS_COLOR_ARGB16:
> - case OMAP_DSS_COLOR_RGBA16:
> - case OMAP_DSS_COLOR_RGB12U:
> - case OMAP_DSS_COLOR_ARGB16_1555:
> - case OMAP_DSS_COLOR_XRGB16_1555:
> - case OMAP_DSS_COLOR_RGBX16:
> - truncation = true;
> - break;
> - default:
> - truncation = false;
> - break;
> - }
> -
> - /* setup extra DISPC_WB_ATTRIBUTES */
> - l = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
> - l = FLD_MOD(l, truncation, 10, 10); /* TRUNCATIONENABLE */
> - l = FLD_MOD(l, mem_to_mem, 19, 19); /* WRITEBACKMODE */
> - if (mem_to_mem)
> - l = FLD_MOD(l, 1, 26, 24); /* CAPTUREMODE */
> - else
> - l = FLD_MOD(l, 0, 26, 24); /* CAPTUREMODE */
> - dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), l);
> -
> - if (mem_to_mem) {
> - /* WBDELAYCOUNT */
> - REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 7, 0);
> - } else {
> - int wbdelay;
> -
> - wbdelay = min(mgr_timings->vfp + mgr_timings->vsw +
> - mgr_timings->vbp, 255);
> -
> - /* WBDELAYCOUNT */
> - REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), wbdelay, 7, 0);
> - }
> -
> - return r;
> -}
> -
> int dispc_ovl_enable(enum omap_plane plane, bool enable)
> {
> DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
> @@ -2903,16 +2799,6 @@ bool dispc_mgr_is_enabled(enum omap_channel channel)
> }
> EXPORT_SYMBOL(dispc_mgr_is_enabled);
>
> -void dispc_wb_enable(bool enable)
> -{
> - dispc_ovl_enable(OMAP_DSS_WB, enable);
> -}
> -
> -bool dispc_wb_is_enabled(void)
> -{
> - return dispc_ovl_enabled(OMAP_DSS_WB);
> -}
> -
> static void dispc_lcd_enable_signal_polarity(bool act_high)
> {
> if (!dss_has_feature(FEAT_LCDENABLEPOL))
> diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.h b/drivers/video/fbdev/omap2/omapfb/dss/dss.h
> index a2269008590f..21cfcbf74a6d 100644
> --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.h
> +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.h
> @@ -89,17 +89,6 @@ enum dss_dsi_content_type {
> DSS_DSI_CONTENT_GENERIC,
> };
>
> -enum dss_writeback_channel {
> - DSS_WB_LCD1_MGR = 0,
> - DSS_WB_LCD2_MGR = 1,
> - DSS_WB_TV_MGR = 2,
> - DSS_WB_OVL0 = 3,
> - DSS_WB_OVL1 = 4,
> - DSS_WB_OVL2 = 5,
> - DSS_WB_OVL3 = 6,
> - DSS_WB_LCD3_MGR = 7,
> -};
> -
> enum dss_pll_id {
> DSS_PLL_DSI1,
> DSS_PLL_DSI2,
> @@ -403,15 +392,6 @@ int dispc_mgr_get_clock_div(enum omap_channel channel,
> struct dispc_clock_info *cinfo);
> void dispc_set_tv_pclk(unsigned long pclk);
>
> -u32 dispc_wb_get_framedone_irq(void);
> -bool dispc_wb_go_busy(void);
> -void dispc_wb_go(void);
> -void dispc_wb_enable(bool enable);
> -bool dispc_wb_is_enabled(void);
> -void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
> -int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
> - bool mem_to_mem, const struct omap_video_timings *timings);
> -
> u32 dispc_read_irqstatus(void);
> void dispc_clear_irqstatus(u32 mask);
> u32 dispc_read_irqenable(void);
>
More information about the dri-devel
mailing list