[PATCH 20/21] drm: mxsfb: Merge mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt()
Stefan Agner
stefan at agner.ch
Mon Mar 23 23:34:28 UTC 2020
On 2020-03-09 20:52, Laurent Pinchart wrote:
> The mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() functions both deal
> with format configuration, are always called in a row from
> mxsfb_crtc_mode_set_nofb(), and set fields from the LCDC_CTRL register.
> This requires a read-modify-update cycle in mxsfb_set_bus_fmt(). Make
> this more efficient by merging them together.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Stefan Agner <stefan at agner.ch>
> ---
> drivers/gpu/drm/mxsfb/mxsfb_kms.c | 47 +++++++++++++------------------
> 1 file changed, 19 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> index 19b937b383cf..f81f8c222c13 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c
> @@ -42,13 +42,23 @@ static u32 set_hsync_pulse_width(struct
> mxsfb_drm_private *mxsfb, u32 val)
> mxsfb->devdata->hs_wdth_shift;
> }
>
> -/* Setup the MXSFB registers for decoding the pixels out of the framebuffer */
> -static void mxsfb_set_pixel_fmt(struct mxsfb_drm_private *mxsfb)
> +/*
> + * Setup the MXSFB registers for decoding the pixels out of the framebuffer and
> + * outputting them on the bus.
> + */
> +static void mxsfb_set_formats(struct mxsfb_drm_private *mxsfb)
> {
> struct drm_device *drm = mxsfb->drm;
> const u32 format = mxsfb->crtc.primary->state->fb->format->format;
> + u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> u32 ctrl, ctrl1;
>
> + if (mxsfb->connector->display_info.num_bus_formats)
> + bus_format = mxsfb->connector->display_info.bus_formats[0];
> +
> + DRM_DEV_DEBUG_DRIVER(drm->dev, "Using bus_format: 0x%08X\n",
> + bus_format);
> +
> ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER;
>
> /* CTRL1 contains IRQ config and status bits, preserve those. */
> @@ -69,40 +79,23 @@ static void mxsfb_set_pixel_fmt(struct
> mxsfb_drm_private *mxsfb)
> break;
> }
>
> - writel(ctrl1, mxsfb->base + LCDC_CTRL1);
> - writel(ctrl, mxsfb->base + LCDC_CTRL);
> -}
> -
> -static void mxsfb_set_bus_fmt(struct mxsfb_drm_private *mxsfb)
> -{
> - struct drm_device *drm = mxsfb->drm;
> - u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> - u32 reg;
> -
> - reg = readl(mxsfb->base + LCDC_CTRL);
> -
> - if (mxsfb->connector->display_info.num_bus_formats)
> - bus_format = mxsfb->connector->display_info.bus_formats[0];
> -
> - DRM_DEV_DEBUG_DRIVER(drm->dev, "Using bus_format: 0x%08X\n",
> - bus_format);
> -
> - reg &= ~CTRL_BUS_WIDTH_MASK;
> switch (bus_format) {
> case MEDIA_BUS_FMT_RGB565_1X16:
> - reg |= CTRL_BUS_WIDTH_16;
> + ctrl |= CTRL_BUS_WIDTH_16;
> break;
> case MEDIA_BUS_FMT_RGB666_1X18:
> - reg |= CTRL_BUS_WIDTH_18;
> + ctrl |= CTRL_BUS_WIDTH_18;
> break;
> case MEDIA_BUS_FMT_RGB888_1X24:
> - reg |= CTRL_BUS_WIDTH_24;
> + ctrl |= CTRL_BUS_WIDTH_24;
> break;
> default:
> dev_err(drm->dev, "Unknown media bus format %d\n", bus_format);
> break;
> }
> - writel(reg, mxsfb->base + LCDC_CTRL);
> +
> + writel(ctrl1, mxsfb->base + LCDC_CTRL1);
> + writel(ctrl, mxsfb->base + LCDC_CTRL);
> }
>
> static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
> @@ -213,7 +206,7 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
> /* Clear the FIFOs */
> writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
>
> - mxsfb_set_pixel_fmt(mxsfb);
> + mxsfb_set_formats(mxsfb);
>
> clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
>
> @@ -255,8 +248,6 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
>
> writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
>
> - mxsfb_set_bus_fmt(mxsfb);
> -
> /* Frame length in lines. */
> writel(m->crtc_vtotal, mxsfb->base + LCDC_VDCTRL1);
More information about the dri-devel
mailing list