[PATCH v5 4/5] drm: imx: Add i.MX 6 MIPI DSI host platform driver

Adrian Ratiu adrian.ratiu at collabora.com
Mon Mar 30 21:20:42 UTC 2020


On Mon, 30 Mar 2020, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Adrian, 
> 
> On Mon, Mar 30, 2020 at 8:34 AM Adrian Ratiu 
> <adrian.ratiu at collabora.com> wrote: 
>> 
>> This adds support for the Synopsis DesignWare MIPI DSI v1.01 
>> host controller which is embedded in i.MX 6 SoCs. 
>> 
>> Based on following patches, but updated/extended to work with 
>> existing support found in the kernel: 
>> 
>> - drm: imx: Support Synopsys DesignWare MIPI DSI host 
>> controller 
>>   Signed-off-by: Liu Ying <Ying.Liu at freescale.com> 
>> 
>> - ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller 
>>   Signed-off-by: Liu Ying <Ying.Liu at freescale.com> 
> 
> This one looks like a devicetree patch, but this patch does not 
> touch devicetree. 
> 
>> +       ret = clk_prepare_enable(dsi->pllref_clk); +       if 
>> (ret) { +               dev_err(dev, "%s: Failed to enable 
>> pllref_clk\n", __func__); +               return ret; +       } 
>> + +       dsi->mux_sel = 
>> syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr"); + 
>> if (IS_ERR(dsi->mux_sel)) { +               ret = 
>> PTR_ERR(dsi->mux_sel); +               dev_err(dev, "%s: Failed 
>> to get GPR regmap: %d\n", +                       __func__, 
>> ret); +               return ret; 
> 
> You should disable the dsi->pllref_clk clock prior to returning 
> the error. 
> 
>> +       dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata); + 
>> if (IS_ERR(dsi->mipi_dsi)) { +               ret = 
>> PTR_ERR(dsi->mipi_dsi); +               dev_dbg(dev, "%s: 
>> Unable to probe DW DSI host device: %d\n", + 
>> __func__, ret); +               return -ENODEV; 
> 
> Same here. You should disable the clock. Shouldn't you return 
> 'ret' here instead of -ENODEV? 
> 
>> +module_platform_driver(imx_mipi_dsi_driver); + 
>> +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver"); 
>> +MODULE_AUTHOR("Liu Ying <Ying.Liu at freescale.com>"); 
> 
> The freescale.com domain is no longer functional. 
> 
> Ying Liu's NXP address is victor.liu at nxp.com. You could probably 
> add your entry as well. 

Hi Fabio,

All the issues you pointed out are valid and will be addressed in 
v6 (including the device tree ones).

Thank you, much appreciated,
Adrian


More information about the dri-devel mailing list