[PATCH 10/17] drm/mgag200: Set pitch in a separate helper function
Sam Ravnborg
sam at ravnborg.org
Sun May 3 15:42:09 UTC 2020
Hi Thomas.
On Wed, Apr 29, 2020 at 04:32:31PM +0200, Thomas Zimmermann wrote:
> The framebuffer's pitch is now set in mgag200_set_offset().
>
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
I failed to follow this code.
> ---
> drivers/gpu/drm/mgag200/mgag200_mode.c | 41 +++++++++++++++++---------
> 1 file changed, 27 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
> index 92dee31f16c42..eb83e471d72fc 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_mode.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
> @@ -1003,6 +1003,32 @@ static void mgag200_set_mode_regs(struct mga_device *mdev,
> mga_crtc_set_plls(mdev, mode->clock);
> }
>
> +static void mgag200_set_offset(struct mga_device *mdev,
> + const struct drm_framebuffer *fb)
> +{
> + unsigned int offset;
> + uint8_t crtc13, crtcext0;
> + u8 bppshift;
> +
> + bppshift = mdev->bpp_shifts[fb->format->cpp[0] - 1];
Hmm, use of cpp is deprecated. But is continue to be used all over.
> +
> + offset = fb->pitches[0] / fb->format->cpp[0];
> + if (fb->format->cpp[0] * 8 == 24)
> + offset = (offset * 3) >> (4 - bppshift);
> + else
> + offset = offset >> (4 - bppshift);
> +
> + RREG_ECRT(0, crtcext0);
> +
> + crtc13 = offset & 0xff;
> +
> + crtcext0 &= ~GENMASK(5, 4);
> + crtcext0 |= (offset & GENMASK(9, 8)) >> 4;
Lot's of hardcoded numbers.
Could the reg file include these so you had more readable defined names?
> +
> + WREG_CRT(0x13, crtc13);
> + WREG_ECRT(0x00, crtcext0);
> +}
> +
> static int mga_crtc_mode_set(struct drm_crtc *crtc,
> struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode,
> @@ -1011,7 +1037,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
> struct drm_device *dev = crtc->dev;
> struct mga_device *mdev = dev->dev_private;
> const struct drm_framebuffer *fb = crtc->primary->fb;
> - int pitch;
> int option = 0, option2 = 0;
> int i;
> unsigned char misc = 0;
> @@ -1122,12 +1147,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
> WREG_SEQ(3, 0);
> WREG_SEQ(4, 0xe);
>
> - pitch = fb->pitches[0] / fb->format->cpp[0];
> - if (fb->format->cpp[0] * 8 == 24)
> - pitch = (pitch * 3) >> (4 - bppshift);
> - else
> - pitch = pitch >> (4 - bppshift);
> -
> WREG_GFX(0, 0);
> WREG_GFX(1, 0);
> WREG_GFX(2, 0);
> @@ -1144,20 +1163,15 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
> WREG_CRT(13, 0);
> WREG_CRT(14, 0);
> WREG_CRT(15, 0);
> - WREG_CRT(19, pitch & 0xFF);
> -
> - ext_vga[0] = 0;
>
> /* TODO interlace */
>
> - ext_vga[0] |= (pitch & 0x300) >> 4;
> if (fb->format->cpp[0] * 8 == 24)
> ext_vga[3] = (((1 << bppshift) * 3) - 1) | 0x80;
> else
> ext_vga[3] = ((1 << bppshift) - 1) | 0x80;
> ext_vga[4] = 0;
>
> - WREG_ECRT(0, ext_vga[0]);
> WREG_ECRT(3, ext_vga[3]);
> WREG_ECRT(4, ext_vga[4]);
>
> @@ -1171,8 +1185,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
> WREG_ECRT(6, 0);
> }
>
> - WREG_ECRT(0, ext_vga[0]);
> -
> misc = RREG8(MGA_MISC_IN);
> misc |= MGAREG_MISC_IOADSEL |
> MGAREG_MISC_RAMMAPEN |
> @@ -1180,6 +1192,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
> WREG8(MGA_MISC_OUT, misc);
>
> mga_crtc_do_set_base(mdev, fb, old_fb);
> + mgag200_set_offset(mdev, fb);
>
> mgag200_set_mode_regs(mdev, mode);
Sam
More information about the dri-devel
mailing list