[PATCH 00/17] drm/mgag200: Convert to atomic modesetting

[John Donnelly]

> On May 4, 2020, at 8:39 AM, Thomas Zimmermann <tzimmermann at suse.de> wrote:
> 
> Hi John
> 
> Am 30.04.20 um 02:11 schrieb John Donnelly:
>> On 4/29/20 9:32 AM, Thomas Zimmermann wrote:
>>> This patchset converts mgag200 to atomic modesetting. It uses simple
>>> KMS helpers and SHMEM.
>>> 
>>> Patches 1 to 4 simplifies the driver before the conversion. For example,
>>> the HW cursor is not usable with the way universal planes work. A few
>>> data structures can be cleaned up.
>>> 
>>> Patches 5 to 15 untangle the existing modesetting code into smaller
>>> functions. Specifically, mode setting and plane updates are being
>>> separated from each other.
>>> 
>>> Patch 16 converts mgag200 to simple KMS helpers and enables atomic
>>> mode setting.
>>> 
>>> As some HW seems to require a framebuffer offset of 0 within the video
>>> memory, it does not work with atomic modesetting. Atomically switching
>>> plane framebuffers, requires either source or target buffer to be located
>>> at a non-0 offet. To resolve this problem, patch 17 converts mgag200 from
>>> VRAM helpers to SHMEM helpers. During plane updates, the content of the
>>> SHMEM BO is memcpy'd to VRAM. From my subjective obersation, performance
>>> is not nuch different from the original code.
>>> 
>>> The patchset has been tested on MGA G200EH hardware.
>>> 
>>> Thomas Zimmermann (17):
>>>    drm/mgag200: Remove HW cursor
>>>    drm/mgag200: Remove unused fields from struct mga_device
>>>    drm/mgag200: Embed connector instance in struct mga_device
>>>    drm/mgag200: Use managed mode-config initialization
>>>    drm/mgag200: Clean up mga_set_start_address()
>>>    drm/mgag200: Clean up mga_crtc_do_set_base()
>>>    drm/mgag200: Move mode-setting code into separate helper function
>>>    drm/mgag200: Split MISC register update into PLL selection, SYNC and
>>>      I/O
>>>    drm/mgag200: Update mode registers after plane registers
>>>    drm/mgag200: Set pitch in a separate helper function
>>>    drm/mgag200: Set primary plane's format in separate helper function
>>>    drm/mgag200: Move TAGFIFO reset into separate function
>>>    drm/mgag200: Move hiprilvl setting into separate functions
>>>    drm/mgag200: Move register initialization into separate function
>>>    drm/mgag200: Remove waiting from DPMS code
>>>    drm/mgag200: Convert to simple KMS helper
>>>    drm/mgag200: Replace VRAM helpers with SHMEM helpers
>>> 
>>>   drivers/gpu/drm/mgag200/Kconfig          |   4 +-
>>>   drivers/gpu/drm/mgag200/Makefile         |   2 +-
>>>   drivers/gpu/drm/mgag200/mgag200_cursor.c | 319 --------
>>>   drivers/gpu/drm/mgag200/mgag200_drv.c    |  51 +-
>>>   drivers/gpu/drm/mgag200/mgag200_drv.h    |  43 +-
>>>   drivers/gpu/drm/mgag200/mgag200_main.c   |  28 -
>>>   drivers/gpu/drm/mgag200/mgag200_mode.c   | 948 ++++++++++++-----------
>>>   drivers/gpu/drm/mgag200/mgag200_reg.h    |   5 +-
>>>   drivers/gpu/drm/mgag200/mgag200_ttm.c    |  35 +-
>>>   9 files changed, 563 insertions(+), 872 deletions(-)
>>>   delete mode 100644 drivers/gpu/drm/mgag200/mgag200_cursor.c
>>> 
>>> -- 
>>> 2.26.0
>>> 
>> 
>> 
>>  Hi Thomas ,
>> 
>>  I would like to test this on hardware that uses this device integrated
>> into as BMC  ( iLo ) that I have ran into problems before. Can you post
>> your staging URL so I can clone it ?
> 
> I uploaded the patches at
> 
> 
> https://gitlab.freedesktop.org/tzimmermann/linux/-/tree/mgag200-simplekms-20200504
> 
> You can clone them with
> 
>  git clone git at gitlab.freedesktop.org:tzimmermann/linux.git
> 
> and checkout the mgag200-simplekms-20200405 branch afterwards.
> 
> Best regards
> Thomas



 Got it . Thank you .