[PATCH v2 1/5] ARM: dts: stm32: Add pin map for ltdc, spi5 on stm32f429-disco board

dillon.minfei at gmail.com dillon.minfei at gmail.com
Fri May 8 04:13:10 UTC 2020


From: dillon min <dillon.minfei at gmail.com>

This patch adds the pin configuration for ltdc, spi5 controller
on stm32f429-disco board.

Signed-off-by: dillon min <dillon.minfei at gmail.com>
---
 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 ++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 392fa14..0eb107f 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -316,6 +316,73 @@
 				};
 			};
 
+			ltdc_pins_f429_disco: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
 			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
-- 
2.7.4



More information about the dri-devel mailing list