[PATCH 1/3] gpu/drm: Fix spelling of *sequence* and *frequency*
Paul Menzel
pmenzel at molgen.mpg.de
Sun May 10 12:08:33 UTC 2020
Fix all occurrences with the commands below.
$ git grep -l equnce drivers/gpu/ | xargs sed -i 's/equnce/equence/g'
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: Christian König <christian.koenig at amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou at amd.com>
Cc: amd-gfx at lists.freedesktop.org
Signed-off-by: Paul Menzel <pmenzel at molgen.mpg.de>
---
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 4 ++--
drivers/gpu/drm/amd/include/atombios.h | 6 +++---
drivers/gpu/drm/radeon/atombios.h | 6 +++---
drivers/gpu/drm/radeon/cik.c | 4 ++--
drivers/gpu/drm/radeon/radeon_fence.c | 6 +++---
5 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
index 733d398c61ccb..3da40056c6c5d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c
@@ -2176,7 +2176,7 @@ static void gfx_v7_0_ring_emit_vgt_flush(struct amdgpu_ring *ring)
* @adev: amdgpu_device pointer
* @fence: amdgpu fence object
*
- * Emits a fence sequnce number on the gfx ring and flushes
+ * Emits a fence sequence number on the gfx ring and flushes
* GPU caches.
*/
static void gfx_v7_0_ring_emit_fence_gfx(struct amdgpu_ring *ring, u64 addr,
@@ -2217,7 +2217,7 @@ static void gfx_v7_0_ring_emit_fence_gfx(struct amdgpu_ring *ring, u64 addr,
* @adev: amdgpu_device pointer
* @fence: amdgpu fence object
*
- * Emits a fence sequnce number on the compute ring and flushes
+ * Emits a fence sequence number on the compute ring and flushes
* GPU caches.
*/
static void gfx_v7_0_ring_emit_fence_compute(struct amdgpu_ring *ring,
diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
index 8ba21747b40a3..afef574c3b88b 100644
--- a/drivers/gpu/drm/amd/include/atombios.h
+++ b/drivers/gpu/drm/amd/include/atombios.h
@@ -6138,7 +6138,7 @@ ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms.
ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
-ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate.
+ulNbpStateMemclkFreq[4]: system memory clock frequencey in unit of 10Khz in different NB pstate.
**********************************************************************************************************************/
@@ -6346,7 +6346,7 @@ ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is custom
ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
-ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
+ulNbpStateMemclkFreq[4]: system memory clock frequencey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State
usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded
@@ -8902,7 +8902,7 @@ typedef struct _ATOM_XTMDS_INFO
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip
UCHAR ucXtransimitterID;
UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
- UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
+ UCHAR ucSequenceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
// due to design. This ID is used to alert driver that the sequence is not "standard"!
UCHAR ucMasterAddress; // Address to control Master xTMDS Chip
UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 4b86e8b450090..4d0f6de32957f 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -5206,7 +5206,7 @@ ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms.
ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0.
-ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate.
+ulNbpStateMemclkFreq[4]: system memory clock frequencey in unit of 10Khz in different NB pstate.
**********************************************************************************************************************/
@@ -5413,7 +5413,7 @@ ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is custom
ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL
-ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
+ulNbpStateMemclkFreq[4]: system memory clock frequencey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3).
ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State
usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded
@@ -7597,7 +7597,7 @@ typedef struct _ATOM_XTMDS_INFO
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip
UCHAR ucXtransimitterID;
UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
- UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
+ UCHAR ucSequenceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters
// due to design. This ID is used to alert driver that the sequence is not "standard"!
UCHAR ucMasterAddress; // Address to control Master xTMDS Chip
UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 5c42877fd6fbf..4ce70793e85fb 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -3544,7 +3544,7 @@ static void cik_hdp_flush_cp_ring_emit(struct radeon_device *rdev,
* @rdev: radeon_device pointer
* @fence: radeon fence object
*
- * Emits a fence sequnce number on the gfx ring and flushes
+ * Emits a fence sequence number on the gfx ring and flushes
* GPU caches.
*/
void cik_fence_gfx_ring_emit(struct radeon_device *rdev,
@@ -3585,7 +3585,7 @@ void cik_fence_gfx_ring_emit(struct radeon_device *rdev,
* @rdev: radeon_device pointer
* @fence: radeon fence object
*
- * Emits a fence sequnce number on the compute ring and flushes
+ * Emits a fence sequence number on the compute ring and flushes
* GPU caches.
*/
void cik_fence_compute_ring_emit(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 43f2f93078668..77658ecdd181b 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -338,7 +338,7 @@ void radeon_fence_process(struct radeon_device *rdev, int ring)
* @seq: sequence number
* @ring: ring index the fence is associated with
*
- * Check if the last signaled fence sequnce number is >= the requested
+ * Check if the last signaled fence sequence number is >= the requested
* sequence number (all asics).
* Returns true if the fence has signaled (current fence value
* is >= requested value) or false if it has not (current fence
@@ -458,7 +458,7 @@ bool radeon_fence_signaled(struct radeon_fence *fence)
* @rdev: radeon device pointer
* @seq: sequence numbers
*
- * Check if the last signaled fence sequnce number is >= the requested
+ * Check if the last signaled fence sequence number is >= the requested
* sequence number (all asics).
* Returns true if any has signaled (current value is >= requested value)
* or false if it has not. Helper function for radeon_fence_wait_seq.
@@ -483,7 +483,7 @@ static bool radeon_fence_any_seq_signaled(struct radeon_device *rdev, u64 *seq)
* @timeout: maximum time to wait, or MAX_SCHEDULE_TIMEOUT for infinite wait
*
* Wait for the requested sequence number(s) to be written by any ring
- * (all asics). Sequnce number array is indexed by ring id.
+ * (all asics). Sequence number array is indexed by ring id.
* @intr selects whether to use interruptable (true) or non-interruptable
* (false) sleep when waiting for the sequence number. Helper function
* for radeon_fence_wait_*().
--
2.26.2
More information about the dri-devel
mailing list