[GIT PULL] mediatek drm next for 5.8
Andrzej Hajda
a.hajda at samsung.com
Thu May 14 13:47:26 UTC 2020
Hi All,
On 14.05.2020 07:25, Daniel Vetter wrote:
> On Thu, May 14, 2020 at 1:33 AM Chun-Kuang Hu <chunkuang.hu at kernel.org> wrote:
>> Hi, Daniel:
>>
>> Daniel Vetter <daniel at ffwll.ch> 於 2020年5月14日 週四 上午3:45寫道:
>>> On Thu, May 14, 2020 at 12:16:59AM +0800, Chun-Kuang Hu wrote:
>>>> Hi, Dave & Daniel:
>>>>
>>>> This include dpi pin mode swap, config mipi_tx current and impedance,
>>>> convert mtk-dpi to drm_bridge API, and some fixup.
>>>>
>>>> The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:
>>>> Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)
>>>> are available in the Git repository at:
>>>> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git
>>>> tags/mediatek-drm-next-5.8
>>> Your pull request is badly line wrapped, and I don't have an ssh account
>>> on that machine ... Maybe airlied has, not sure. http:// or git:// would
>>> be a bunch easier, and then signed that. Plus if your pull isn't
>>> linewrapped we can stuff it directly into scripts.
>> This is my first time to request-pull on that server, I would try to
>> make things easier and resend request.
>>
>>> All I quickly wanted to quickly check is your new bridge driver.
>>> - was that reviewed/acked by bridge maintainers? There's a lot of rework
>>> going on right now, need to make sure we're not adding new bridge
>>> drivers that use old style
>>>
>>> - why is this bridge driver not in drm/bridge/ directory?
>> I does not notice that drm bridge has maintainer, I would drop bridge
>> series first, and wait for ack of bridge maintainer.
>> mtk-dpi is also a drm encoder, and I grep 'drm_bridge_add' and find
>> many out side of bridge folder, so maybe we need to discuss more about
>> this.
> Hm indeed. Maybe we need to extend the MAINTAINERS entry for bridges
> so that it matches bridge drivers outside of drm/bridge. Sounds like
> we have tons of those already.
>
> Andrzej, Neil, Laurent, Sam, any thoughts?
>
> I guess meanwhile this should be ok.
> -Daniel
As I looked at matching rules in MAINTAINERS file there is no ideal one
to fulfil this task.
Maybe the closest one is: K: drm_bridge.
Would be ideally to extend F rule to match content of file, for example:
F: drivers/gpu/drm/#drm_bridge_add - match all files in drivers/gpu/drm/
with content matching regex drm_bridge_add.
Any other ideas?
Regards
Andrzej
>
>> Regards,
>> Chun-Kuang.
>>
>>> Cheers, Daniel
>>>
>>>> for you to fetch changes up to 23b29ff9f13a8fb5a12be9fedb8b614b9dede46a:
>>>> drm/mediatek: Eliminate the magic number in array size (2020-05-10
>>>> 09:08:30 +0800)
>>>> ----------------------------------------------------------------
>>>> Mediatek DRM Next for Linux 5.8
>>>> ----------------------------------------------------------------
>>>> Anand K Mistry (1):
>>>> drm/mediatek: Stop iterating dma addresses when sg_dma_len() == 0
>>>> Bernard Zhao (2):
>>>> drm/mediatek: Cleanup coding style in mediatek a bit
>>>> drm/mediatek: Eliminate the magic number in array size
>>>> Chun-Kuang Hu (1):
>>>> Merge tag 'v5.7-next-drm-stable' of
>>>> ssh://gitolite.kernel.org/.../matthias.bgg/linux into
>>>> mediatek-drm-next
>>>> Enric Balletbo i Serra (7):
>>>> dt-bindings: mediatek: Update mmsys binding to reflect it is a
>>>> system controller
>>>> soc / drm: mediatek: Move routing control to mmsys device
>>>> soc / drm: mediatek: Fix mediatek-drm device probing
>>>> drm/mediatek: Remove debug messages for function calls
>>>> drm/mediatek: mtk_dpi: Rename bridge to next_bridge
>>>> drm/mediatek: mtk_dpi: Convert to bridge driver
>>>> drm/mediatek: mtk_dpi: Use simple encoder
>>>> Hsin-Yi Wang (1):
>>>> drm/mediatek: Fix device passed to cmdq
>>>> Jitao Shi (6):
>>>> dt-bindings: display: mediatek: control dpi pins mode to avoid leakage
>>>> drm/mediatek: set dpi pin mode to gpio low to avoid leakage current
>>>> dt-bindings: display: mediatek: add property to control mipi tx
>>>> drive current
>>>> dt-bindings: display: mediatek: get mipitx calibration data from nvmem
>>>> drm/mediatek: add the mipitx driving control
>>>> drm/mediatek: config mipitx impedance with calibration data
>>>> Matthias Brugger (2):
>>>> drm/mediatek: Omit warning on probe defers
>>>> clk / soc: mediatek: Move mt8173 MMSYS to platform driver
>>>> YueHaibing (1):
>>>> drm/mediatek: Fix Kconfig warning
>>>> Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt | 7 +-
>>>> Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt | 6 +
>>>> Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt | 10 ++
>>>> drivers/clk/mediatek/Kconfig | 7 +
>>>> drivers/clk/mediatek/Makefile | 1 +
>>>> drivers/clk/mediatek/clk-mt8173-mm.c |
>>>> 146 +++++++++++++++++++
>>>> drivers/clk/mediatek/clk-mt8173.c |
>>>> 104 --------------
>>>> drivers/gpu/drm/mediatek/Kconfig | 1 +
>>>> drivers/gpu/drm/mediatek/mtk_disp_color.c | 5 +-
>>>> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 5 +-
>>>> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 5 +-
>>>> drivers/gpu/drm/mediatek/mtk_dpi.c |
>>>> 127 ++++++++++-------
>>>> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 27 ++--
>>>> drivers/gpu/drm/mediatek/mtk_drm_ddp.c |
>>>> 259 +---------------------------------
>>>> drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 7 -
>>>> drivers/gpu/drm/mediatek/mtk_drm_drv.c |
>>>> 50 +++----
>>>> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 2 +-
>>>> drivers/gpu/drm/mediatek/mtk_drm_gem.c | 3 +
>>>> drivers/gpu/drm/mediatek/mtk_dsi.c | 8 +-
>>>> drivers/gpu/drm/mediatek/mtk_hdmi.c | 22 ++-
>>>> drivers/gpu/drm/mediatek/mtk_mipi_tx.c |
>>>> 54 +++++++
>>>> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 4 +
>>>> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 28 ++++
>>>> drivers/soc/mediatek/Kconfig | 8 ++
>>>> drivers/soc/mediatek/Makefile | 1 +
>>>> drivers/soc/mediatek/mtk-mmsys.c |
>>>> 337 ++++++++++++++++++++++++++++++++++++++++++++
>>>> include/linux/soc/mediatek/mtk-mmsys.h | 20 +++
>>>> 27 files changed, 778 insertions(+), 476 deletions(-)
>>>> create mode 100644 drivers/clk/mediatek/clk-mt8173-mm.c
>>>> create mode 100644 drivers/soc/mediatek/mtk-mmsys.c
>>>> create mode 100644 include/linux/soc/mediatek/mtk-mmsys.h
>>> --
>>> Daniel Vetter
>>> Software Engineer, Intel Corporation
>>> https://protect2.fireeye.com/url?k=6b3cd950-36f75e6e-6b3d521f-0cc47a31309a-78c27b43412cd927&q=1&u=http%3A%2F%2Fblog.ffwll.ch%2F
>
>
More information about the dri-devel
mailing list