[PATCH v2 1/4] ARM: dts: dove: Make the DT compliant with the ti, tfp410 binding

[Ricardo Cañuelo]

Define a 'ports' node for 'dvi: video at 39' and use the proper naming for
the powerdown-gpios property to make it compliant with the ti,tfp410
binding.

This fills the minimum requirements to meet the binding requirements,
port endpoints are not defined.

Signed-off-by: Ricardo Cañuelo <ricardo.canuelo at collabora.com>
---
 arch/arm/boot/dts/dove-sbc-a510.dts | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts
index 2bb85a9b7614..32804c981625 100644
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/dove-sbc-a510.dts
@@ -132,7 +132,18 @@
 	dvi: video at 39 {
 		compatible = "ti,tfp410";
 		reg = <0x39>;
-		powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 0 {
+				reg = <0>;
+			};
+			port at 1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
-- 
2.18.0