[PATCH v2] drm/dp: Include the AUX CH name in the debug messages
Ville Syrjala
ville.syrjala at linux.intel.com
Thu May 14 18:40:40 UTC 2020
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
To make it easier to figure out what caused a particular debug
message let's print out aux->name.
v2: Convert drm_dp_send_real_edid_checksum() too
Cc: Sam Ravnborg <sam at ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
IIRC Sam suggested that I switch to per-device logging functions at the
same time. Sadly that's going to require some amount of actual work:
For i915/amdgpu/nouveau/etc. aux->dev is connector->kdev instead of the
pdev->dev we want, which we could handle by walking up the tree several
levels. However it looks like some of the armish drivers stick pdev->dev
directly into aux->dev so there we don't want to walk up the tree. This
means either one set of drivers will need to change their aux->dev
assignment approach, or we're going to need another device pointer in
there. I didn't even want to look what the bridge drivers put there.
In the meantime I refreshed the original patch which at least lets
us see aux->name...
drivers/gpu/drm/drm_dp_helper.c | 67 ++++++++++++++++++---------------
1 file changed, 37 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 43e57632b00a..743ead068a43 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -257,7 +257,8 @@ static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request,
err = ret;
}
- DRM_DEBUG_KMS("Too many retries, giving up. First error: %d\n", err);
+ DRM_DEBUG_KMS("%s: Too many retries, giving up. First error: %d\n",
+ aux->name, err);
ret = err;
unlock:
@@ -376,43 +377,44 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
if (drm_dp_dpcd_read(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
&auto_test_req, 1) < 1) {
- DRM_ERROR("DPCD failed read at register 0x%x\n",
- DP_DEVICE_SERVICE_IRQ_VECTOR);
+ DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
+ aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
return false;
}
auto_test_req &= DP_AUTOMATED_TEST_REQUEST;
if (drm_dp_dpcd_read(aux, DP_TEST_REQUEST, &link_edid_read, 1) < 1) {
- DRM_ERROR("DPCD failed read at register 0x%x\n",
- DP_TEST_REQUEST);
+ DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
+ aux->name, DP_TEST_REQUEST);
return false;
}
link_edid_read &= DP_TEST_LINK_EDID_READ;
if (!auto_test_req || !link_edid_read) {
- DRM_DEBUG_KMS("Source DUT does not support TEST_EDID_READ\n");
+ DRM_DEBUG_KMS("%s: Source DUT does not support TEST_EDID_READ\n",
+ aux->name);
return false;
}
if (drm_dp_dpcd_write(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
&auto_test_req, 1) < 1) {
- DRM_ERROR("DPCD failed write at register 0x%x\n",
- DP_DEVICE_SERVICE_IRQ_VECTOR);
+ DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
return false;
}
/* send back checksum for the last edid extension block data */
if (drm_dp_dpcd_write(aux, DP_TEST_EDID_CHECKSUM,
&real_edid_checksum, 1) < 1) {
- DRM_ERROR("DPCD failed write at register 0x%x\n",
- DP_TEST_EDID_CHECKSUM);
+ DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_TEST_EDID_CHECKSUM);
return false;
}
test_resp |= DP_TEST_EDID_CHECKSUM_WRITE;
if (drm_dp_dpcd_write(aux, DP_TEST_RESPONSE, &test_resp, 1) < 1) {
- DRM_ERROR("DPCD failed write at register 0x%x\n",
- DP_TEST_RESPONSE);
+ DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_TEST_RESPONSE);
return false;
}
@@ -737,10 +739,11 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
* Avoid spamming the kernel log with timeout errors.
*/
if (ret == -ETIMEDOUT)
- DRM_DEBUG_KMS_RATELIMITED("transaction timed out\n");
+ DRM_DEBUG_KMS_RATELIMITED("%s: transaction timed out\n",
+ aux->name);
else
- DRM_DEBUG_KMS("transaction failed: %d\n", ret);
-
+ DRM_DEBUG_KMS("%s: transaction failed: %d\n",
+ aux->name, ret);
return ret;
}
@@ -754,11 +757,12 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
break;
case DP_AUX_NATIVE_REPLY_NACK:
- DRM_DEBUG_KMS("native nack (result=%d, size=%zu)\n", ret, msg->size);
+ DRM_DEBUG_KMS("%s: native nack (result=%d, size=%zu)\n",
+ aux->name, ret, msg->size);
return -EREMOTEIO;
case DP_AUX_NATIVE_REPLY_DEFER:
- DRM_DEBUG_KMS("native defer\n");
+ DRM_DEBUG_KMS("%s: native defer\n", aux->name);
/*
* We could check for I2C bit rate capabilities and if
* available adjust this interval. We could also be
@@ -772,7 +776,8 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
continue;
default:
- DRM_ERROR("invalid native reply %#04x\n", msg->reply);
+ DRM_ERROR("%s: invalid native reply %#04x\n",
+ aux->name, msg->reply);
return -EREMOTEIO;
}
@@ -787,13 +792,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
return ret;
case DP_AUX_I2C_REPLY_NACK:
- DRM_DEBUG_KMS("I2C nack (result=%d, size=%zu)\n",
- ret, msg->size);
+ DRM_DEBUG_KMS("%s: I2C nack (result=%d, size=%zu)\n",
+ aux->name, ret, msg->size);
aux->i2c_nack_count++;
return -EREMOTEIO;
case DP_AUX_I2C_REPLY_DEFER:
- DRM_DEBUG_KMS("I2C defer\n");
+ DRM_DEBUG_KMS("%s: I2C defer\n", aux->name);
/* DP Compliance Test 4.2.2.5 Requirement:
* Must have at least 7 retries for I2C defers on the
* transaction to pass this test
@@ -807,12 +812,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
continue;
default:
- DRM_ERROR("invalid I2C reply %#04x\n", msg->reply);
+ DRM_ERROR("%s: invalid I2C reply %#04x\n",
+ aux->name, msg->reply);
return -EREMOTEIO;
}
}
- DRM_DEBUG_KMS("too many retries, giving up\n");
+ DRM_DEBUG_KMS("%s: Too many retries, giving up\n", aux->name);
return -EREMOTEIO;
}
@@ -841,8 +847,8 @@ static int drm_dp_i2c_drain_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *o
return err == 0 ? -EPROTO : err;
if (err < msg.size && err < ret) {
- DRM_DEBUG_KMS("Partial I2C reply: requested %zu bytes got %d bytes\n",
- msg.size, err);
+ DRM_DEBUG_KMS("%s: Partial I2C reply: requested %zu bytes got %d bytes\n",
+ aux->name, msg.size, err);
ret = err;
}
@@ -1021,11 +1027,12 @@ static void drm_dp_aux_crc_work(struct work_struct *work)
}
if (ret == -EAGAIN) {
- DRM_DEBUG_KMS("Get CRC failed after retrying: %d\n",
- ret);
+ DRM_DEBUG_KMS("%s: Get CRC failed after retrying: %d\n",
+ aux->name, ret);
continue;
} else if (ret) {
- DRM_DEBUG_KMS("Failed to get a CRC: %d\n", ret);
+ DRM_DEBUG_KMS("%s: Failed to get a CRC: %d\n",
+ aux->name, ret);
continue;
}
@@ -1387,8 +1394,8 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
dev_id_len = strnlen(ident->device_id, sizeof(ident->device_id));
- DRM_DEBUG_KMS("DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
- is_branch ? "branch" : "sink",
+ DRM_DEBUG_KMS("%s: DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
+ aux->name, is_branch ? "branch" : "sink",
(int)sizeof(ident->oui), ident->oui,
dev_id_len, ident->device_id,
ident->hw_rev >> 4, ident->hw_rev & 0xf,
--
2.26.2
More information about the dri-devel
mailing list