[PATCH v6 16/16] drm/i915: Add HDCP 1.4 support for MST connectors
Ramalingam C
ramalingam.c at intel.com
Fri May 15 14:42:56 UTC 2020
On 2020-04-29 at 15:55:02 -0400, Sean Paul wrote:
> From: Sean Paul <seanpaul at chromium.org>
>
> Now that all the groundwork has been laid, we can turn on HDCP 1.4 over
> MST. Everything except for toggling the HDCP signalling and HDCP 2.2
> support is the same as the DP case, so we'll re-use those callbacks
>
> Cc: Juston Li <juston.li at intel.com>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-12-sean@poorly.run #v1
> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-13-sean@poorly.run #v2
> Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-13-sean@poorly.run #v3
> Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-15-sean@poorly.run #v4
> Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-17-sean@poorly.run #v5
>
> Changes in v2:
> -Toggle HDCP from encoder disable/enable
> -Don't disable HDCP on MST connector destroy, leave that for encoder
> disable, just ensure the check_work routine isn't running any longer
> Changes in v3:
> -Place the shim in the new intel_dp_hdcp.c file (Ville)
> Changes in v4:
> -Actually use the mst shim for mst connections (Juston)
> -Use QUERY_STREAM_ENC_STATUS MST message to verify channel is encrypted
> Changes in v5:
> -Add sleep on disable signalling to match hdmi delay
> Changes in v6:
> -Disable HDCP over MST on GEN12+ since I'm unsure how it should work and I
> don't have hardware to test it
> ---
> drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 107 ++++++++++++++++++-
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 18 ++++
> 2 files changed, 124 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> index 4e3dafbea1f9..331fdb312e05 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> @@ -7,10 +7,12 @@
> */
>
> #include <drm/drm_dp_helper.h>
> +#include <drm/drm_dp_mst_helper.h>
> #include <drm/drm_hdcp.h>
> #include <drm/drm_print.h>
>
> #include "intel_display_types.h"
> +#include "intel_ddi.h"
> #include "intel_dp.h"
> #include "intel_hdcp.h"
>
> @@ -618,6 +620,106 @@ static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
> .protocol = HDCP_PROTOCOL_DP,
> };
>
> +static int
> +intel_dp_mst_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port,
> + enum transcoder cpu_transcoder,
> + bool enable)
> +{
> + struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
> + int ret;
> +
> + if (!enable)
> + usleep_range(6, 60); /* Bspec says >= 6us */
> +
> + ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base,
> + cpu_transcoder, enable);
Sean,
The bit configured here is meant for HDMI and DVI only. Ignore for DP.
Thanks anshuman for pointing that out.
> + if (ret)
> + drm_dbg_kms(&i915->drm, "%s HDCP signalling failed (%d)\n",
> + enable ? "Enable" : "Disable", ret);
> + return ret;
> +}
> +
> +static
> +int intel_dp_mst_hdcp2_write_msg(struct intel_digital_port *intel_dig_port,
> + void *buf, size_t size)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static
> +int intel_dp_mst_hdcp2_read_msg(struct intel_digital_port *intel_dig_port,
> + u8 msg_id, void *buf, size_t size)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static int
> +intel_dp_mst_hdcp2_config_stream_type(struct intel_digital_port *intel_dig_port,
> + bool is_repeater, u8 content_type)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static
> +int intel_dp_mst_hdcp2_check_link(struct intel_digital_port *intel_dig_port)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static
> +int intel_dp_mst_hdcp2_capable(struct intel_digital_port *intel_dig_port,
> + bool *capable)
> +{
> + *capable = false;
> + return 0;
> +}
> +
> +static
> +bool intel_dp_mst_hdcp_check_link(struct intel_digital_port *intel_dig_port,
> + struct intel_connector *connector)
> +{
> + struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
> + struct intel_dp *intel_dp = &intel_dig_port->dp;
> + struct drm_dp_query_stream_enc_status_ack_reply reply;
> + int ret;
> +
> + if (!intel_dp_hdcp_check_link(intel_dig_port, connector))
> + return false;
> +
> + ret = drm_dp_send_query_stream_enc_status(&intel_dp->mst_mgr,
> + connector->port, &reply);
> + if (ret) {
> + drm_dbg_kms(&i915->drm,
> + "[CONNECTOR:%d:%s] failed QSES ret=%d\n",
> + connector->base.base.id, connector->base.name, ret);
> + return false;
> + }
> +
> + return reply.auth_completed && reply.encryption_enabled;
> +}
> +
> +static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = {
> + .write_an_aksv = intel_dp_hdcp_write_an_aksv,
> + .read_bksv = intel_dp_hdcp_read_bksv,
> + .read_bstatus = intel_dp_hdcp_read_bstatus,
> + .repeater_present = intel_dp_hdcp_repeater_present,
> + .read_ri_prime = intel_dp_hdcp_read_ri_prime,
> + .read_ksv_ready = intel_dp_hdcp_read_ksv_ready,
> + .read_ksv_fifo = intel_dp_hdcp_read_ksv_fifo,
> + .read_v_prime_part = intel_dp_hdcp_read_v_prime_part,
> + .toggle_signalling = intel_dp_mst_hdcp_toggle_signalling,
> + .check_link = intel_dp_mst_hdcp_check_link,
> + .hdcp_capable = intel_dp_hdcp_capable,
> +
> + .write_2_2_msg = intel_dp_mst_hdcp2_write_msg,
> + .read_2_2_msg = intel_dp_mst_hdcp2_read_msg,
> + .config_stream_type = intel_dp_mst_hdcp2_config_stream_type,
> + .check_2_2_link = intel_dp_mst_hdcp2_check_link,
> + .hdcp_2_2_capable = intel_dp_mst_hdcp2_capable,
IMO, we dont need to introduce dummy functions for HDCP2.2 on MST shim,
when we are not enabling HDCP2.2 on it.
At is_hdcp2_supported() just add
if (connector->mst_port)
return false;
> +
> + .protocol = HDCP_PROTOCOL_DP,
> +};
> +
> int intel_dp_init_hdcp(struct intel_digital_port *intel_dig_port,
> struct intel_connector *intel_connector)
> {
> @@ -630,7 +732,10 @@ int intel_dp_init_hdcp(struct intel_digital_port *intel_dig_port,
> if (!is_hdcp_supported(dev_priv, port))
> return 0;
>
> - if (!intel_dp_is_edp(intel_dp))
> + if (intel_connector->mst_port)
> + return intel_hdcp_init(intel_connector, port,
> + &intel_dp_mst_hdcp_shim);
> + else if (!intel_dp_is_edp(intel_dp))
> return intel_hdcp_init(intel_connector, port,
> &intel_dp_hdcp_shim);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index d9dc4dc6ea92..ab24e5057c60 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -36,6 +36,7 @@
> #include "intel_dp.h"
> #include "intel_dp_mst.h"
> #include "intel_dpio_phy.h"
> +#include "intel_hdcp.h"
>
> static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
> struct intel_crtc_state *crtc_state,
> @@ -332,6 +333,8 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
> drm_dbg_kms(&i915->drm, "active links %d\n",
> intel_dp->active_mst_links);
>
> + intel_hdcp_disable(intel_mst->connector);
> +
> drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
>
> ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
> @@ -526,6 +529,13 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
> drm_dp_update_payload_part2(&intel_dp->mst_mgr);
> if (pipe_config->has_audio)
> intel_audio_codec_enable(encoder, pipe_config, conn_state);
> +
> + /* Enable hdcp if it's desired */
> + if (conn_state->content_protection ==
> + DRM_MODE_CONTENT_PROTECTION_DESIRED)
> + intel_hdcp_enable(to_intel_connector(conn_state->connector),
> + pipe_config->cpu_transcoder,
> + (u8)conn_state->hdcp_content_type);
I am afraid I am not seeing the stream level HDCP encryption set
anywhere. How the userspace will indicate the streams that needs to be
hdcp encrypted?
Thanks,
-Ram
> }
>
> static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder,
> @@ -748,6 +758,14 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
> intel_attach_force_audio_property(connector);
> intel_attach_broadcast_rgb_property(connector);
>
> +
> + /* TODO: Figure out how to make HDCP work on GEN12+ */
> + if (INTEL_GEN(dev_priv) < 12) {
> + ret = intel_dp_init_hdcp(intel_dig_port, intel_connector);
> + if (ret)
> + DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
> + }
> +
> /*
> * Reuse the prop from the SST connector because we're
> * not allowed to create new props after device registration.
> --
> Sean Paul, Software Engineer, Google / Chromium OS
>
More information about the dri-devel
mailing list