[PATCH v4 2/8] ARM: dts: stm32: enable l3gd20 on stm32429-disco board

[dillon.minfei at gmail.com]

From: dillon min <dillon.minfei at gmail.com>

L3gd20, st mems motion sensor, 3-axis digital output gyroscope,
connect to stm32f429 via spi5

Signed-off-by: dillon min <dillon.minfei at gmail.com>
---
 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 392fa14..54c1b27 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -316,6 +316,23 @@
 				};
 			};
 
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
 			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
-- 
2.7.4