[PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode

dillon.minfei at gmail.com dillon.minfei at gmail.com
Mon May 25 03:41:02 UTC 2020


From: dillon min <dillon.minfei at gmail.com>

since chip spi driver need get the transfer direction by 'tx_buf' and
'rx_buf' of 'struct spi_transfer' in 'SPI_3WIRE' mode.

so, we need bypass 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX'
feature in 'SPI_3WIRE' mode

Signed-off-by: dillon min <dillon.minfei at gmail.com>
---
 drivers/spi/spi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c92c894..f884411 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1023,7 +1023,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	void *tmp;
 	unsigned int max_tx, max_rx;
 
-	if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
+	if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX))
+		&& !(msg->spi->mode & SPI_3WIRE)) {
 		max_tx = 0;
 		max_rx = 0;
 
-- 
2.7.4



More information about the dri-devel mailing list