[PATCH v3 2/4] drm/bridge: ti-sn65dsi86: Make polling a busy loop

[Stephen Boyd]

There's no reason we need to wait here to poll a register over i2c. The
i2c bus is inherently slow and delays are practically part of the
protocol because we have to wait for the device to respond to any
request for a register. Let's rely on the sleeping of the i2c controller
instead of adding any sort of delay here in the bridge driver.

Reviewed-by: Douglas Anderson <dianders at chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec at siol.net>
Cc: Sean Paul <seanpaul at chromium.org>
Acked-by: Sam Ravnborg <sam at ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd at chromium.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 87726b9e446f..8276fa50138f 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -881,9 +881,9 @@ static ssize_t ti_sn_aux_transfer(struct drm_dp_aux *aux,
 
 	regmap_write(pdata->regmap, SN_AUX_CMD_REG, request_val | AUX_CMD_SEND);
 
+	/* Zero delay loop because i2c transactions are slow already */
 	ret = regmap_read_poll_timeout(pdata->regmap, SN_AUX_CMD_REG, val,
-				       !(val & AUX_CMD_SEND), 200,
-				       50 * 1000);
+				       !(val & AUX_CMD_SEND), 0, 50 * 1000);
 	if (ret)
 		return ret;
 
-- 
Sent by a computer, using git, on the internet