[PATCH v1 08/30] soc/tegra: regulators: Support Tegra SoC device sync state API
Dmitry Osipenko
digetx at gmail.com
Wed Nov 4 23:44:05 UTC 2020
Downscale of the CORE voltage isn't allowed because some hardware units,
which are supplied by the CORE regulator, usually left ON at a boot time.
The new sync state API resolves this problem for us. All drivers of the
devices that are known to be ON at a boot time now should sync theirs
state. Once everything is synced, the voltage of the CORE domain could
be scaled without any limitations.
Make Tegra20/30 regulator couplers to use the new sync state API.
Tested-by: Peter Geis <pgwipeout at gmail.com>
Tested-by: Nicolas Chauvet <kwizart at gmail.com>
Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
drivers/soc/tegra/regulators-tegra20.c | 19 ++++++++++++++++++-
drivers/soc/tegra/regulators-tegra30.c | 22 +++++++++++++++++++++-
2 files changed, 39 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c
index 367a71a3cd10..8782e399a58c 100644
--- a/drivers/soc/tegra/regulators-tegra20.c
+++ b/drivers/soc/tegra/regulators-tegra20.c
@@ -16,6 +16,8 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <soc/tegra/common.h>
+
struct tegra_regulator_coupler {
struct regulator_coupler coupler;
struct regulator_dev *core_rdev;
@@ -38,6 +40,21 @@ static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
int core_cur_uV;
int err;
+ /*
+ * Tegra20 SoC has critical DVFS-capable devices that are
+ * permanently-active or active at a boot time, like EMC
+ * (DRAM controller) or Host1x bus for example.
+ *
+ * The voltage of a CORE SoC power domain shall not be dropped below
+ * a minimum level, which is determined by device's clock rate.
+ * This means that we can't fully allow CORE voltage scaling until
+ * the state of all DVFS-critical CORE devices is synced.
+ */
+ if (tegra_soc_dvfs_state_synced()) {
+ pr_info_once("voltage state synced\n");
+ return 0;
+ }
+
if (tegra->core_min_uV > 0)
return tegra->core_min_uV;
@@ -58,7 +75,7 @@ static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
*/
tegra->core_min_uV = core_max_uV;
- pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+ pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);
return tegra->core_min_uV;
}
diff --git a/drivers/soc/tegra/regulators-tegra30.c b/drivers/soc/tegra/regulators-tegra30.c
index 7f21f31de09d..f7a5260edffe 100644
--- a/drivers/soc/tegra/regulators-tegra30.c
+++ b/drivers/soc/tegra/regulators-tegra30.c
@@ -16,6 +16,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <soc/tegra/common.h>
#include <soc/tegra/fuse.h>
struct tegra_regulator_coupler {
@@ -39,6 +40,21 @@ static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
int core_cur_uV;
int err;
+ /*
+ * Tegra30 SoC has critical DVFS-capable devices that are
+ * permanently-active or active at a boot time, like EMC
+ * (DRAM controller) or Host1x bus for example.
+ *
+ * The voltage of a CORE SoC power domain shall not be dropped below
+ * a minimum level, which is determined by device's clock rate.
+ * This means that we can't fully allow CORE voltage scaling until
+ * the state of all DVFS-critical CORE devices is synced.
+ */
+ if (tegra_soc_dvfs_state_synced()) {
+ pr_info_once("voltage state synced\n");
+ return 0;
+ }
+
if (tegra->core_min_uV > 0)
return tegra->core_min_uV;
@@ -59,7 +75,7 @@ static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
*/
tegra->core_min_uV = core_max_uV;
- pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+ pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);
return tegra->core_min_uV;
}
@@ -143,6 +159,10 @@ static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra,
if (core_min_uV < 0)
return core_min_uV;
+ err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+ if (err)
+ return err;
+
err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV,
PM_SUSPEND_ON);
if (err)
--
2.27.0
More information about the dri-devel
mailing list