[PATCH v2 5/6] drm/tidss: Move to newer connector model

[Nikhil Devshatwar]

To be able to support connector operations across multiple
bridges, it is recommended that the connector should be
created by the SoC driver instead of the bridges.

Modify the tidss modesetting initialization sequence to
create the connector and attach bridges with flag
DRM_BRIDGE_ATTACH_NO_CONNECTOR

Signed-off-by: Nikhil Devshatwar <nikhil.nd at ti.com>
---
 drivers/gpu/drm/tidss/tidss_drv.h |  3 +++
 drivers/gpu/drm/tidss/tidss_kms.c | 19 ++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tidss/tidss_drv.h b/drivers/gpu/drm/tidss/tidss_drv.h
index 7de4bba52e6f..cfbf85a4d92b 100644
--- a/drivers/gpu/drm/tidss/tidss_drv.h
+++ b/drivers/gpu/drm/tidss/tidss_drv.h
@@ -27,6 +27,9 @@ struct tidss_device {
 	unsigned int num_planes;
 	struct drm_plane *planes[TIDSS_MAX_PLANES];
 
+	unsigned int num_connectors;
+	struct drm_connector *connectors[TIDSS_MAX_PORTS];
+
 	spinlock_t wait_lock;	/* protects the irq masks */
 	dispc_irq_t irq_mask;	/* enabled irqs in addition to wait_list */
 };
diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c
index 09485c7f0d6f..1f5ae153b114 100644
--- a/drivers/gpu/drm/tidss/tidss_kms.c
+++ b/drivers/gpu/drm/tidss/tidss_kms.c
@@ -7,6 +7,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_fb_helper.h>
@@ -192,6 +193,7 @@ static int tidss_dispc_modeset_init(struct tidss_device *tidss)
 	for (i = 0; i < num_pipes; ++i) {
 		struct tidss_plane *tplane;
 		struct tidss_crtc *tcrtc;
+		struct drm_connector *connector;
 		struct drm_encoder *enc;
 		u32 hw_plane_id = feat->vid_order[tidss->num_planes];
 		int ret;
@@ -222,11 +224,26 @@ static int tidss_dispc_modeset_init(struct tidss_device *tidss)
 			return PTR_ERR(enc);
 		}
 
-		ret = drm_bridge_attach(enc, pipes[i].bridge, NULL, 0);
+		ret = drm_bridge_attach(enc, pipes[i].bridge, NULL,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret) {
 			dev_err(tidss->dev, "bridge attach failed: %d\n", ret);
 			return ret;
 		}
+
+		connector = drm_bridge_connector_init(&tidss->ddev, enc);
+		if (IS_ERR(connector)) {
+			dev_err(tidss->dev, "bridge_connector create failed\n");
+			return PTR_ERR(connector);
+		}
+
+		tidss->connectors[tidss->num_connectors++] = connector;
+
+		ret = drm_connector_attach_encoder(connector, enc);
+		if (ret) {
+			dev_err(tidss->dev, "attaching encoder to connector failed\n");
+			return ret;
+		}
 	}
 
 	/* create overlay planes of the leftover planes */
-- 
2.17.1